GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1783-BMS06SGL

✓ In Stock

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1783-BMS06SGL
Series: 1783

Description:

Designed and manufactured by Allen Bradley, part number 1783-BMS06SGL is an Ethernet switch. This device belongs to the Stratix 5700 series of products. This Ethernet switch has a total of 6 ports. The power input of this device is rated as 0.5 to 2.0 amperes maximum at 12 to 48 volts DC. It has a rated power consumption of 9.5 watts at 24 volts DC at 40 degrees Celsius, or a maximum of 15 watts. This Ethernet switch has an approximate weight of 1.11 kilograms.


Key Features:

  • has input voltage of 12 to 48 volts dc
  • utilizes an operating temperature of -40 to 60 degrees celsius.

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Product number 1783-BMS06SGL is an Ethernet switch that was designed and manufactured by Allen Bradley / Rockwell Automation. This Ethernet switch belongs to the Stratix 5700 series of products. It has a total of six (6) ports. The ports of this device include four (4) Fast Ethernet (FE) RJ45 ports, as well as two (2) Gigabit Ethernet (GE) SFP slots. The power input of this Ethernet switch is rate at 0.5 to 2.0 amperes maximum at 12 to 48 volts DC. Additionally, the power consumption rating of this device is rated at 9.5 watts at 24 volts DC at 40 degrees Celsius, or a maximum of 15 watts.The isolation voltage is rated as 50 volts when operating continuously. This product has a basic insulation type. The alarm relay of this Allen Bradley Stratix 5700 Ethernet switch is rated as 1 ampere at 30 volts DC or 0.5 amperes at 48 volts DC. The recommended screw torque for the power and alarm terminals is 0.23 Newton-meters (Nm), or the equivalent of 2.0 in-lb. Additionally, the recommended screw torque for the ground terminal is 0.96 Newton meters, or 8.5 in-lb, maximum. This Ethernet switch has does not have an enclosure and, therefore, is considered to be an open style device. This device has an approximate weight of 1.11 kilograms, or the equivalent of 2.45 pounds. When operating this product, the temperature of the surrounding area should range from -40 to 60 degrees Celsius. Additionally, when this device is being stored, the surrounding area's temperature should range from -40 to 85 degrees Celsius. 

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1783-BMS06SGL?

Answer: Yes. We offer repairs for the 1783-BMS06SGL and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1783-BMS06SGL?

Answer: If you buy the 1783-BMS06SGL through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1783-BMS06SGL online?

Answer: Yes. Automation Stop sells the 1783-BMS06SGL online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1783-BMS06SGL?

Answer: The 1783-BMS06SGL is made by Allen Bradley - PLC.


Series information for 1783-BMS06SGL

For additional information about 1783-BMS06SGL check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1783-BMS06SGL.

Revision Part # Also Known As Availability
1783-BMS06SGL/A 1783-BMS06SGL Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1783-BMS06S6L
  • 1783-BMS065GL
  • 1783-BMS0656L
  • 1783-BMS0GSGL
  • 1783-BMS0GS6L
  • 1783-BMS0G5GL
  • 1783-BMS0G56L
  • 1783-BMSO6SGL
  • 1783-BMSO6S6L
  • 1783-BMSO65GL
  • 1783-BMSO656L
  • 1783-BMSOGSGL
  • 1783-BMSOGS6L
  • 1783-BMSOG5GL
  • 1783-BMSOG56L
  • 1783-BM506SGL
  • 1783-BM506S6L
  • 1783-BM5065GL
  • 1783-BM50656L
  • 1783-BM50GSGL
  • 1783-BM50GS6L
  • 1783-BM50G5GL
  • 1783-BM50G56L
  • 1783-BM5O6SGL
  • 1783-BM5O6S6L
  • 1783-BM5O65GL
  • 1783-BM5O656L
  • 1783-BM5OGSGL
  • 1783-BM5OGS6L
  • 1783-BM5OG5GL
  • 1783-BM5OG56L
  • 1783-8MS06SGL
  • 1783-8MS06S6L
  • 1783-8MS065GL
  • 1783-8MS0656L
  • 1783-8MS0GSGL
  • 1783-8MS0GS6L
  • 1783-8MS0G5GL
  • 1783-8MS0G56L
  • 1783-8MSO6SGL
  • 1783-8MSO6S6L
  • 1783-8MSO65GL
  • 1783-8MSO656L
  • 1783-8MSOGSGL
  • 1783-8MSOGS6L
  • 1783-8MSOG5GL
  • 1783-8MSOG56L
  • 1783-8M506SGL
  • 1783-8M506S6L
  • 1783-8M5065GL
  • 1783-8M50656L
  • 1783-8M50GSGL
  • 1783-8M50GS6L
  • 1783-8M50G5GL
  • 1783-8M50G56L
  • 1783-8M5O6SGL
  • 1783-8M5O6S6L
  • 1783-8M5O65GL
  • 1783-8M5O656L
  • 1783-8M5OGSGL
  • 1783-8M5OGS6L
  • 1783-8M5OG5GL
  • 1783-8M5OG56L
  • 17B3-BMS06SGL
  • 17B3-BMS06S6L
  • 17B3-BMS065GL
  • 17B3-BMS0656L
  • 17B3-BMS0GSGL
  • 17B3-BMS0GS6L
  • 17B3-BMS0G5GL
  • 17B3-BMS0G56L
  • 17B3-BMSO6SGL
  • 17B3-BMSO6S6L
  • 17B3-BMSO65GL
  • 17B3-BMSO656L
  • 17B3-BMSOGSGL
  • 17B3-BMSOGS6L
  • 17B3-BMSOG5GL
  • 17B3-BMSOG56L
  • 17B3-BM506SGL
  • 17B3-BM506S6L
  • 17B3-BM5065GL
  • 17B3-BM50656L
  • 17B3-BM50GSGL
  • 17B3-BM50GS6L
  • 17B3-BM50G5GL
  • 17B3-BM50G56L
  • 17B3-BM5O6SGL
  • 17B3-BM5O6S6L
  • 17B3-BM5O65GL
  • 17B3-BM5O656L
  • 17B3-BM5OGSGL
  • 17B3-BM5OGS6L
  • 17B3-BM5OG5GL
  • 17B3-BM5OG56L
  • 17B3-8MS06SGL
  • 17B3-8MS06S6L
  • 17B3-8MS065GL
  • 17B3-8MS0656L
  • 17B3-8MS0GSGL

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP