GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

1746-NI4-CC

Manufacturer: Allen Bradley - PLC
Product Type: PLC/Programmable Logic Controller
Part Number: 1746-NI4-CC
Series: 1746

Description:

This Allen-Bradley SLC 500 Analog I/O Module comes with 4 differential, voltage, or current input. It requires a single slot for installation and contains a removable terminal block. It provides an accuracy of +/- 0.284% of full scale at 25�C and +/- 0.504% at 0 - 60�C. It uses Delta-Sigma Modulation conversion type and supports DIP switch configuration.


Key Features:

  • It has a backplane current consumption of 25mA at 5V DC and 85mA at 24V DC.
  • This module comes with an LED light indicators for ease in troubleshooting.
  • This module has a resolution of 16bits and a bandwidth of 10Hz.
  • This module has an input resistance of 250ohms.
  • This module operates at a current range of -20 - 20mA and a voltage range of -10 - 10V DC.

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 1746-NI4-CC?

Answer: Yes. We offer repairs for the 1746-NI4-CC and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - PLC and 1746-NI4-CC?

Answer: If you buy the 1746-NI4-CC through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 1746-NI4-CC online?

Answer: Yes. Automation Stop sells the 1746-NI4-CC online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 1746-NI4-CC?

Answer: The 1746-NI4-CC is made by Allen Bradley - PLC.


Series information for 1746-NI4-CC

For additional information about 1746-NI4-CC check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1746-NI4-CC.

Revision Part # Also Known As Availability
1746-NI4-CC/A 1746-NI4-CC Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 1746-N14-CC
  • 174G-NI4-CC
  • 174G-N14-CC
  • I746-NI4-CC
  • I746-N14-CC
  • I74G-NI4-CC
  • I74G-N14-CC

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP