GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B1003T-PJ12AA |
Series: | VPL Servo Motors |
Description:
Part number VPL-B1003T-PJ12AA, which is a Kinetix VP servo motor, was designed and manufactured by Allen Bradley / Rockwell Automation. This device is a 400-volt servo motor with a frame size that measures 100 millimeters and has a magnetic stack length of three (3) stacks. This motor has a 6750 rpm rated speed. This product is equipped with an IEC metric mounting flange with type FF free mounting holes. This motor has an operating temperature that ranges from 0 to 40 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number VPL-B1003T-PJ12AA is part of the Kinetix VP product line and is a servo motor. This device was designed and manufactured by Allen Bradley / Rockwell Automation. This device was designed to be compatible with Kinetix 5500 and Kinetix 5700 drives. The rated speed of this servo motor is 6750 rpm (revolutions per minute). Additionally, the VPL-B1003T-PJ12AA servo motor has an output of 1.77 horsepower (Hp), or the equivalent of 2.37 kilowatts (kW). This servo motor, which has an approximate weight of 4.5 kilograms (kg), has a shaft key and a single rotary connector. The VPL-B1003T-PJ12AA servo motor also features standard factory control options and an IEC metric flange with type FF free mounting holes. This servo motor is small in size and is specially developed for use in a variety of industrial applications. Shaft seals are primarily used to prevent liquids or process materials from entering the vehicle. In addition, shaft seals, especially nitrile seals, are equipped with lubricants to reduce engine aging. When servicing this device, be sure to disconnect the drive before proceeding to avoid damage to the drive and yourself. The operating temperature for this motor ranges from 0 to 40 degrees Celsius, or 32 to 104 degrees Fahrenheit. Additionally, when storing this servo motor, the ambient temperature should remain within a range of -30 to +40 degrees Celsius, or -22 to +104 degrees Fahrenheit. The relative humidity of the storage area should have levels ranging from 5 percent to 90 percent and should be non-condensing.
MPN | VPL-B1003T-PJ12AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 100 mm |
Magnet Stack Length | 3 |
Rated Speed | 6750 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B1003T-PJ12AA?
Answer: Yes. We offer repairs for the VPL-B1003T-PJ12AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1003T-PJ12AA?
Answer: If you buy the VPL-B1003T-PJ12AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B1003T-PJ12AA online?
Answer: Yes. Automation Stop sells the VPL-B1003T-PJ12AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B1003T-PJ12AA?
Answer: The VPL-B1003T-PJ12AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B1003T-PJ12AA?
Answer: The VPL-B1003T-PJ12AA is part of the VPL Servo Motors series.
Question: Does the Allen Bradley VPL-B1003T-PJ12AA have a Brake?
Answer: No Brake.
Question: What is the Connector of the Rockwell-Automation VPL-B1003T-PJ12AA?
Answer: The Connector of the VPL-B1003T-PJ12AA is Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What kind of Factory Options does the Rockwell Automation VPL-B1003T-PJ12AA have?
Answer: The VPL-B1003T-PJ12AA has Factory Options Standard.
Question: What Feedback does the Allen-Bradley VPL-B1003T-PJ12AA have?
Answer: The VPL-B1003T-PJ12AA has a Feedback of 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the VPL-B1003T-PJ12AA?
Answer: The Frame Size - Bolt Circle Diameter of the Allen-Bradley VPL-B1003T-PJ12AA is 100 mm.
Question: What is the Magnet Stack Length of the VPL-B1003T-PJ12AA?
Answer: The Magnet Stack Length of the Allen-Bradley VPL-B1003T-PJ12AA is 3.
Question: What Mounting Flange is included with the VPL-B1003T-PJ12AA?
Answer: The Allen Bradley/Rockwell Automation VPL-B1003T-PJ12AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What Rated Speed does the Allen Bradley Automation VPL-B1003T-PJ12AA have?
Answer: The Allen Bradley Automation VPL-B1003T-PJ12AA has a Rated Speed of 6750 revolutions per minute (RPM).
Question: What Shaft Key is included with the Allen Bradley VPL-B1003T-PJ12AA?
Answer: The Allen Bradley VPL-B1003T-PJ12AA has a Shaft key Shaft Key.
Question: What is the Voltage of the Allen Bradley VPL-B1003T-PJ12AA?
Answer: The Voltage of the VPL-B1003T-PJ12AA is 400 V.
For additional information about VPL-B1003T-PJ12AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1003T-PJ12AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B1003T-PJ12AA/A | VPL-B1003T-PJ12AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.