GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B1003F-PJ14AA |
Series: | VPL Servo Motors |
Description:
The VPL-B1003F-PJ14AA is a low inertia servo motor that was designed and manufactured by Allen Bradley / Rockwell Automation. In addition, this device is capable of utilizing an 18-bit multi-turn encoder and a single encoder for feedback purposes. The frame size of this servo motor is 100 millimeters, and its rated speed is 4500 revolutions per minute (rpm). Furthermore, this device includes stainless steel shafts and supports IEC metrics, and even comes with an LED (light emitting diode) for the operational display.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The VPL-B1003F-PJ14AA is a type of servo motor. This device was designed and manufactured by Allen Bradley / Rockwell Automation. It can operate on a power supply of 400 volts. In addition, it comes with a 100 mm frame size, and the rated speed of this unit is 4500 revolutions per minute (rpm). It has three magnetic stacks. Additionally, this servo motor is equipped with an 18-bit absolute multi-turn digital encoder used for feedback purposes. Furthermore, this servo motor also has a shaft key. This product even has a single SpeedTec DIN connector, which can be rotated at 325 degrees. This servo motor can show the real-time application of the motor performance to the users. The same application data can be processed to the control panel with the help of feedback modules. The mounting flange of this servo motor is an IEC metric that supports free mounting holes from FF type. The brake voltage range of this device is 24 volts DC. This servo motor can powerfully provide adequate precision and control to both the linear and angular positions with all these specifications. It can also enhance the velocity and acceleration of the motor. In addition, it is built using F winding and comes in a bolt circle frame, while its shafts are made from stainless steel making this device durable. This module is robust because it supports both single and multi-turn digital encoders. Moreover, it can use a single cable for the motor braking and motor power. The same cable also helps with the feedback.
MPN | VPL-B1003F-PJ14AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 100 mm |
Magnet Stack Length | 3 |
Rated Speed | 4500 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | 24V DC Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B1003F-PJ14AA?
Answer: Yes. We offer repairs for the VPL-B1003F-PJ14AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1003F-PJ14AA?
Answer: If you buy the VPL-B1003F-PJ14AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B1003F-PJ14AA online?
Answer: Yes. Automation Stop sells the VPL-B1003F-PJ14AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B1003F-PJ14AA?
Answer: The VPL-B1003F-PJ14AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B1003F-PJ14AA?
Answer: The VPL-B1003F-PJ14AA is part of the VPL Servo Motors series.
Question: What Brake does the Allen Bradley VPL-B1003F-PJ14AA have?
Answer: The Allen Bradley VPL-B1003F-PJ14AA has a Brake of 24 volts direct current (DC) Brake.
Question: What is the Connector of the VPL-B1003F-PJ14AA?
Answer: The VPL-B1003F-PJ14AA has a Connector of Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the VPL-B1003F-PJ14AA?
Answer: The VPL-B1003F-PJ14AA includes Standard for its Factory Options.
Question: What is the Feedback of the Allen Bradley VPL-B1003F-PJ14AA?
Answer: The Feedback of the VPL-B1003F-PJ14AA is 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the Allen-Bradley VPL-B1003F-PJ14AA?
Answer: The Frame Size - Bolt Circle Diameter of the VPL-B1003F-PJ14AA is 100 mm.
Question: What is the Magnet Stack Length of the VPL-B1003F-PJ14AA?
Answer: The Magnet Stack Length of the Rockwell Automation VPL-B1003F-PJ14AA is 3.
Question: What Mounting Flange does the VPL-B1003F-PJ14AA have?
Answer: The VPL-B1003F-PJ14AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What Rated Speed does the VPL-B1003F-PJ14AA have?
Answer: The Rated Speed of the Allen Bradley-Rockwell Automation VPL-B1003F-PJ14AA is 4500 revolutions per minute (RPM).
Question: What Shaft Key is included with the VPL-B1003F-PJ14AA?
Answer: The VPL-B1003F-PJ14AA has a Shaft key Shaft Key.
Question: What is the Voltage of the VPL-B1003F-PJ14AA?
Answer: The Allen-Bradley VPL-B1003F-PJ14AA has a Voltage of 400 V.
For additional information about VPL-B1003F-PJ14AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1003F-PJ14AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B1003F-PJ14AA/A | VPL-B1003F-PJ14AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.