GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | VPL-B1002M-PJ12AA |
Series: | VPL Servo Motors |
Description:
Designed and produced by Allen Bradley / Rockwell Automation, this device, with the part number VPL-B1002M-PJ12AA, is a servo motor from the Kinetix VP line of products. This is a 400-volt servo motor with a maximum and rated speed of 6000 revolutions per minute (rpm). The frame size of this device measures 100 millimeters. This servo motor has an operating temperature that should remain within a range of 0 to 40 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number VPL-B1002M-PJ12AA is a low inertia servo motor from the Kinetix VP series of products. This Kinetix VP servo motor was designed and manufactured by the company known as Allen Bradley / Rockwell Automation. This servo motor is compatible with various drives from both the Kinetix 5500 and 5700 series. This motor is classified as a 400-volt servo motor. This product has a frame size, or bolt circle diameter (BCD), of 100 millimeters. Additionally, this servo motor has a magnetic stack length of 2 stacks. This device has a maximum and rated speed of 6000 revolutions per minute, or rpm. When it comes to giving feedback, this servo motor has an 18-bit absolute multi-turn digital encoder. This encoder is capable of giving absolute position feedback within 4096 revolutions. This servo motor does have a shaft key, as well as a SpeedTec DIN connector that is positioned at a right angle and can rotate up to 325 degrees. It is equipped with a mounting flange with free mounting holes that are type FF. This servo drive has an IP rating of IP 50. This device was designed to be used in the manufacturing industry, or any industry/environment that requires an assembly line setup. The operating temperature of this servo motor has a range of 0 to 40 degrees Celsius. When storing this drive, it is important to keep the temperature of the surrounding area within a range of -30 to +40 degrees Celsius. The relative humidity should have levels that range from 5% to 90% with no condensation.
MPN | VPL-B1002M-PJ12AA |
Manufacturer | Allen Bradley / Rockwell Automation |
Series | Kinetix VP Low Intertia Servo Motor |
Voltage | 400 V |
Frame Size - Bolt Circle Diameter | 100 mm |
Magnet Stack Length | 2 |
Rated Speed | 6000 rpm |
Feedback | 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol) |
Shaft Key | Shaft key |
Connector | Single SpeedTec DIN connector, right angle, 325 degree rotatable |
Brake | No Brake |
Mounting Flange | IEC metric, free mounting holes (type FF) |
Factory Options | Standard |
Question: Does Automation Stop offer repairs on the VPL-B1002M-PJ12AA?
Answer: Yes. We offer repairs for the VPL-B1002M-PJ12AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and VPL-B1002M-PJ12AA?
Answer: If you buy the VPL-B1002M-PJ12AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the VPL-B1002M-PJ12AA online?
Answer: Yes. Automation Stop sells the VPL-B1002M-PJ12AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the VPL-B1002M-PJ12AA?
Answer: The VPL-B1002M-PJ12AA is made by Allen Bradley - Motors.
Question: What type of product is the VPL-B1002M-PJ12AA?
Answer: The VPL-B1002M-PJ12AA is part of the VPL Servo Motors series.
Question: Does the VPL-B1002M-PJ12AA have a Brake?
Answer: No Brake.
Question: What Connector does the Allen Bradley/Rockwell Automation VPL-B1002M-PJ12AA have?
Answer: The VPL-B1002M-PJ12AA has a Connector of Single SpeedTec DIN connector, right angle, 325 degree rotatable .
Question: What Factory Options are included with the VPL-B1002M-PJ12AA?
Answer: The VPL-B1002M-PJ12AA has Factory Options Standard.
Question: What Feedback does the Rockwell-Automation VPL-B1002M-PJ12AA have?
Answer: The Rockwell-Automation VPL-B1002M-PJ12AA has a Feedback of 18-bit absolute multi-turn (4096 revolutions) digital encoder (Hiperface DSL protocol).
Question: What is the Frame Size - Bolt Circle Diameter of the Allen Bradley/Rockwell Automation VPL-B1002M-PJ12AA?
Answer: The Frame Size - Bolt Circle Diameter of the Allen Bradley/Rockwell Automation VPL-B1002M-PJ12AA is 100 mm.
Question: What is the Magnet Stack Length of the VPL-B1002M-PJ12AA?
Answer: The Allen-Bradley VPL-B1002M-PJ12AA has a Magnet Stack Length of 2.
Question: What Mounting Flange does the Allen Bradley VPL-B1002M-PJ12AA have?
Answer: The Allen Bradley VPL-B1002M-PJ12AA has a IEC metric, free mounting holes (type FF) Mounting Flange.
Question: What is the Rated Speed of the VPL-B1002M-PJ12AA?
Answer: The VPL-B1002M-PJ12AA has a Rated Speed of 6000 revolutions per minute (RPM).
Question: What Shaft Key is included with the VPL-B1002M-PJ12AA?
Answer: The VPL-B1002M-PJ12AA has a Shaft key Shaft Key.
Question: What Voltage does the Allen-Bradley VPL-B1002M-PJ12AA have?
Answer: The Voltage of the Allen-Bradley VPL-B1002M-PJ12AA is 400 V.
For additional information about VPL-B1002M-PJ12AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding VPL-B1002M-PJ12AA.
Revision Part # | Also Known As | Availability |
---|---|---|
VPL-B1002M-PJ12AA/A | VPL-B1002M-PJ12AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.