GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TLY-A2540P-BJ62AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: TLY-A2540P-BJ62AA
Series: TLY and TL Servo Motors

Description:

The TLY-A2540P-BJ62AA is a servo motor manufactured by Allen-Bradley. This module is rated for up to five thousand (5000) revolutions per minute. This low inertia motor has a NEMA 34 frame and a magnet stack length of forty (40). The flange size of this device measures 90 millimeters. This servo motor is equipped with a battery backup, as well as multi-turn absolute encoder feedback. This servo motor, however, does not include a brake.


Key Features:

  • operates at 200v for voltage
  • provides a rated speed of 5000 rpm
  • has cables with circular connectors, 1 m connector

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley designed and produced the TLY-A2540P-BJ62AA to serve as a servo motor which also plays a part in their TL-series, and it's a motor with low inertia. Furthermore, this Allen-Bradley servo motor has a two-thirty (32)-volt alternating current (AC) input voltage rating and a rotational speed of up to five thousand (5000) rpm (revolutions per minute). This module by Allen-Bradley also has a flange size of ninety (90) millimeters. This Allen-Bradley module also has an included battery backup, as well as multi-turn absolute encoder feedback. In addition to that, dust and water-resistant housing protect the servo motor assembly. The unit has a circular connector made of plastic and 1-meter-long leads. However, this servo motor does not include a brake. Tool contact with the couplings, pulleys, and key, as well as the shaft, must be avoided by the operators during installation and removal of this Allen-Bradley module since these components are sensitive and are at risk of being damaged as a result of hard contact. Operators must keep in mind that it is also important not to damage the bearings of motor components. Furthermore, it is highly recommended to anyone operating this module that the wires be routed in such a way that they form a drip loop and pass beneath the motor. Therefore, users are advised to read the installation instructions provided by the manufacturer before proceeding with the installation. For those interested and who need to get some questions answered, the Allen-Bradley / Rockwell Automation website contains additional information about the TLY-A2540P-BJ62AA.

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives
Frame Sizes Metric and NEMA frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000
Voltage Class 200V-class windings
Frame Size 90 mm (3.54 in.) or NEMA 34
Motor stack length Four stack
Rated Speed 5000 rpm
Feedback Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol)
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with circular connectors, 1 m (39.4 in.)
Brake No Brake
Factory Options Standard Metric
MPN TLY-A2540P-BJ62AA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TLY-A2540P-BJ62AA?

Answer: Yes. We offer repairs for the TLY-A2540P-BJ62AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A2540P-BJ62AA?

Answer: If you buy the TLY-A2540P-BJ62AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TLY-A2540P-BJ62AA online?

Answer: Yes. Automation Stop sells the TLY-A2540P-BJ62AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TLY-A2540P-BJ62AA?

Answer: The TLY-A2540P-BJ62AA is made by Allen Bradley - Motors.


Question: What type of product is the TLY-A2540P-BJ62AA?

Answer: The TLY-A2540P-BJ62AA is part of the TLY and TL Servo Motors series.


Question: Does the TLY-A2540P-BJ62AA have a Brake?

Answer: No Brake.


Question: What Cable Extensions does the Rockwell Automation TLY-A2540P-BJ62AA have?

Answer: The Cable Extensions of the Rockwell Automation TLY-A2540P-BJ62AA is 1 m (3.2ft).


Question: What Certifications are included with the TLY-A2540P-BJ62AA?

Answer: The TLY-A2540P-BJ62AA has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What Compatible servo drives does the TLY-A2540P-BJ62AA have?

Answer: The TLY-A2540P-BJ62AA has a Compatible servo drives of Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.


Question: What is the Connectors of the TLY-A2540P-BJ62AA?

Answer: The Connectors of the TLY-A2540P-BJ62AA is Cables with circular connectors, 1 m (39.4 in.).


Question: What is the Continuous stall torque of the TLY-A2540P-BJ62AA?

Answer: The Continuous stall torque of the Rockwell-Automation TLY-A2540P-BJ62AA is 0.086...5.42 N*m (0.76...48 lb*in).


Question: What Enclosure does the Rockwell-Automation TLY-A2540P-BJ62AA have?

Answer: The TLY-A2540P-BJ62AA has a Enclosure of IP65 housing.


Question: What Factory Options are included with the TLY-A2540P-BJ62AA?

Answer: The Allen Bradley-Rockwell Automation TLY-A2540P-BJ62AA has Factory Options Standard Metric.


Question: What is the Feedback of the Allen-Bradley TLY-A2540P-BJ62AA?

Answer: The Feedback of the TLY-A2540P-BJ62AA is Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol).


Question: What is the Frame Size of the TLY-A2540P-BJ62AA?

Answer: The Allen-Bradley TLY-A2540P-BJ62AA has a Frame Size of 90 mm (3.54 in.) or NEMA 34.


Question: What Frame Sizes are included with the TLY-A2540P-BJ62AA?

Answer: The Rockwell-Automation TLY-A2540P-BJ62AA includes Metric and NEMA frame sizes for its Frame Sizes.


Question: What is the Kinetix Compatibility of the TLY-A2540P-BJ62AA?

Answer: The Kinetix Compatibility of the Rockwell-Automation TLY-A2540P-BJ62AA is offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.


Question: What kind of Magnets does the TLY-A2540P-BJ62AA have?

Answer: The TLY-A2540P-BJ62AA includes High-energy Neodymium-Iron-Boron (NeFeB) magnets for its Magnets.


Question: What is the Motor rated output of the TLY-A2540P-BJ62AA?

Answer: The Motor rated output of the TLY-A2540P-BJ62AA is 0.037...2.0 kW.


Question: What Motor stack length is included with the Rockwell Automation TLY-A2540P-BJ62AA?

Answer: The TLY-A2540P-BJ62AA has a Four stack Motor stack length.


Question: What is the Peak stall torque of the TLY-A2540P-BJ62AA?

Answer: The Allen Bradley TLY-A2540P-BJ62AA has a Peak stall torque of 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type is included with the Allen Bradley TLY-A2540P-BJ62AA?

Answer: The Allen Bradley TLY-A2540P-BJ62AA has a Brushless AC (alternating current) Synchronous Servo Motors Product Type.


Question: What Rated Speed does the Allen Bradley/Rockwell Automation TLY-A2540P-BJ62AA have?

Answer: The Rated Speed of the TLY-A2540P-BJ62AA is 5000 revolutions per minute (RPM).


Question: What Shaft key does the TLY-A2540P-BJ62AA have?

Answer: The TLY-A2540P-BJ62AA has a Has Shaft key Shaft key.


Question: Does the TLY-A2540P-BJ62AA have a Shaft Seal?

Answer: No Shaft seal.


Question: What is the Voltage Class of the TLY-A2540P-BJ62AA?

Answer: The Voltage Class of the TLY-A2540P-BJ62AA is 200V-class windings.


Series information for TLY-A2540P-BJ62AA

For additional information about TLY-A2540P-BJ62AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A2540P-BJ62AA.

Revision Part # Also Known As Availability
TLY-A2540P-BJ62AA/A TLY-A2540P-BJ62AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TLY-A2540P-BJG2AA
  • TLY-A2540P-8J62AA
  • TLY-A2540P-8JG2AA
  • TLY-A254OP-BJ62AA
  • TLY-A254OP-BJG2AA
  • TLY-A254OP-8J62AA
  • TLY-A254OP-8JG2AA
  • TLY-A2S40P-BJ62AA
  • TLY-A2S40P-BJG2AA
  • TLY-A2S40P-8J62AA
  • TLY-A2S40P-8JG2AA
  • TLY-A2S4OP-BJ62AA
  • TLY-A2S4OP-BJG2AA
  • TLY-A2S4OP-8J62AA
  • TLY-A2S4OP-8JG2AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP