GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

TLY-A2530P-HJ62AA

Manufacturer: Allen Bradley - Motors
Product Type: Servo Motor
Part Number: TLY-A2530P-HJ62AA
Series: TLY and TL Servo Motors

Description:

The Allen-Bradley TLY-A2530P-HJ62AA is a servo motor designed for low inertia and high torque to size ratio but also to position precise applications. It has a rotor inertia of only 0.00087 lb-in-sec2, and peak stall torque 46 lb-in, while the output power is 0.92 Hp and rotation speed 5000 rpm. Usually, it is connected to CompactLogix L43 Controller and to Kinetix 2000 drive but can be used on any other similar compatible control motion system.


Key Features:

  • operates at 200v for voltage
  • provides a rated speed of 5000 rpm
  • contains cables with circular connectors, 1 m connector

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TheTLY-A2530P-HJ62AA, which was manufactured by the company known as Allen-Bradley, is a servo motor designed to be featured in the TLY series of Allen-Bradley products. This unit has some unique features that are not found in other series of products. These features include a high torque to size ratio among some other things. This product has a five thousand (5000) rpm (revolutions per minute) speed rating and a stall torque that peaks at forty-six (46) lb-in. The size of the TLY-A2530P-HJ62AA's frame measures 3.54 inches. Feedback capabilities are also another important feature that this device offers to any connected drive. These feedback capabilities are enabled due to the help of a line incremental encoder. This specific encoder has 2000 (two thousand) lines per revolution. Therefore, a tight position control with 17 (seventeen) bit resolution can been achieved. The Allen-Bradley TLY-A230T-Hj62AA has an output power rating of 0.92 Hp (horsepower) and a rotor inertia of 0.00087 lb-in-sec2. Additionally, the TLY-A2530P-HJ62AA has a stall torque that peaks at forty-six (46) lb-in. Two hundred and thirty (230) volts alternating current (AC) is the rated voltage for this Allen-Bradley product. The flange size measures ninety (90) millimeters and the stack length is thirty (30). This device has an IP65 housing enclosure with a shaft key. There is no brake on this device and it is equipped with a NEMA mounting flange. When operating this device, the temperature is recommended to remain in the zero to forty (0 to 40) degrees Celsius, or thirty-two to one hundred and four (32 to 104) degrees Fahrenheit, range. When storing this product, the ambient temperature range should remain between negative ten and positive eighty-five (-10 to +85) degrees Celsius, or fourteen to one hundred and eighty-five (14 to 185) degrees Fahrenheit. The relative humidity around the product should remain between 20% and 85% and should be non-condensing. 

Technical Specifications

Manufacturer Allen Bradley
Series TL-Series Motors
Product Type Brushless AC Synchronous Servo Motors
Kinetix Compatibility offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives
Frame Sizes Metric and NEMA frame sizes
Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets
Cable Extensions 1 m (3.2ft)
Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information
Continuous stall torque 0.086...5.42 N*m (0.76...48 lb*in)
Peak stall torque 0.22...13 N*m (1.94...115 lb*in)
Motor rated output 0.037...2.0 kW
Compatible servo drives Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000
Voltage Class 200V-class windings
Frame Size 90 mm (3.54 in.) or NEMA 34
Motor stack length Three stack
Rated Speed 5000 rpm
Feedback 2000 lines/revolution, incremental encoder
Enclosure IP65 housing
Shaft key Has Shaft key
Shaft Seal No Shaft seal
Connectors Cables with circular connectors, 1 m (39.4 in.)
Brake No Brake
Factory Options Standard Metric
MPN TLY-A2530P-HJ62AA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the TLY-A2530P-HJ62AA?

Answer: Yes. We offer repairs for the TLY-A2530P-HJ62AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A2530P-HJ62AA?

Answer: If you buy the TLY-A2530P-HJ62AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the TLY-A2530P-HJ62AA online?

Answer: Yes. Automation Stop sells the TLY-A2530P-HJ62AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the TLY-A2530P-HJ62AA?

Answer: The TLY-A2530P-HJ62AA is made by Allen Bradley - Motors.


Question: What type of product is the TLY-A2530P-HJ62AA?

Answer: The TLY-A2530P-HJ62AA is part of the TLY and TL Servo Motors series.


Question: Does the TLY-A2530P-HJ62AA have a Brake?

Answer: No Brake.


Question: What Cable Extensions does the TLY-A2530P-HJ62AA have?

Answer: The Rockwell Automation TLY-A2530P-HJ62AA has a Cable Extensions of 1 m (3.2ft).


Question: What kind of Certifications does the Allen Bradley-Rockwell Automation TLY-A2530P-HJ62AA have?

Answer: The Allen Bradley-Rockwell Automation TLY-A2530P-HJ62AA has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.


Question: What is the Compatible servo drives of the Allen-Bradley TLY-A2530P-HJ62AA?

Answer: The Compatible servo drives of the Allen-Bradley TLY-A2530P-HJ62AA is Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.


Question: What is the Connectors of the TLY-A2530P-HJ62AA?

Answer: The TLY-A2530P-HJ62AA has a Connectors of Cables with circular connectors, 1 m (39.4 in.).


Question: What Continuous stall torque does the Allen Bradley/Rockwell Automation TLY-A2530P-HJ62AA have?

Answer: The Continuous stall torque of the Allen Bradley/Rockwell Automation TLY-A2530P-HJ62AA is 0.086...5.42 N*m (0.76...48 lb*in).


Question: What is the Enclosure of the Allen Bradley TLY-A2530P-HJ62AA?

Answer: The TLY-A2530P-HJ62AA has a Enclosure of IP65 housing.


Question: What Factory Options are included with the TLY-A2530P-HJ62AA?

Answer: The Rockwell-Automation TLY-A2530P-HJ62AA has Factory Options Standard Metric.


Question: What is the Feedback of the Allen-Bradley TLY-A2530P-HJ62AA?

Answer: The Feedback of the Allen-Bradley TLY-A2530P-HJ62AA is 2000 lines/revolution, incremental encoder.


Question: What Frame Size does the TLY-A2530P-HJ62AA have?

Answer: The Allen Bradley TLY-A2530P-HJ62AA has a Frame Size of 90 mm (3.54 in.) or NEMA 34.


Question: What Frame Sizes are included with the TLY-A2530P-HJ62AA?

Answer: The TLY-A2530P-HJ62AA has Frame Sizes Metric and NEMA frame sizes.


Question: What Kinetix Compatibility does the TLY-A2530P-HJ62AA have?

Answer: The TLY-A2530P-HJ62AA has a Kinetix Compatibility of offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.


Question: What kind of Magnets does the Rockwell Automation TLY-A2530P-HJ62AA have?

Answer: The Rockwell Automation TLY-A2530P-HJ62AA has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.


Question: What Motor rated output does the TLY-A2530P-HJ62AA have?

Answer: The Motor rated output of the Allen Bradley/Rockwell Automation TLY-A2530P-HJ62AA is 0.037...2.0 kW.


Question: What Motor stack length does the Allen Bradley Automation TLY-A2530P-HJ62AA have?

Answer: The Allen Bradley Automation TLY-A2530P-HJ62AA has a Three stack Motor stack length.


Question: What Peak stall torque does the TLY-A2530P-HJ62AA have?

Answer: The Peak stall torque of the TLY-A2530P-HJ62AA is 0.22...13 N*m (1.94...115 lb*in).


Question: What Product Type is included with the Allen Bradley/Rockwell Automation TLY-A2530P-HJ62AA?

Answer: The TLY-A2530P-HJ62AA has a Brushless AC (alternating current) Synchronous Servo Motors Product Type.


Question: What is the Rated Speed of the TLY-A2530P-HJ62AA?

Answer: The Allen Bradley TLY-A2530P-HJ62AA has a Rated Speed of 5000 revolutions per minute (RPM).


Question: What Shaft key does the Allen Bradley/Rockwell Automation TLY-A2530P-HJ62AA have?

Answer: The Allen Bradley/Rockwell Automation TLY-A2530P-HJ62AA has a Has Shaft key Shaft key.


Question: Does the Rockwell-Automation TLY-A2530P-HJ62AA have a Shaft Seal?

Answer: No Shaft seal.


Question: What is the Voltage Class of the TLY-A2530P-HJ62AA?

Answer: The Voltage Class of the TLY-A2530P-HJ62AA is 200V-class windings.


Series information for TLY-A2530P-HJ62AA

For additional information about TLY-A2530P-HJ62AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A2530P-HJ62AA.

Revision Part # Also Known As Availability
TLY-A2530P-HJ62AA/A TLY-A2530P-HJ62AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • TLY-A2530P-HJG2AA
  • TLY-A253OP-HJ62AA
  • TLY-A253OP-HJG2AA
  • TLY-A2S30P-HJ62AA
  • TLY-A2S30P-HJG2AA
  • TLY-A2S3OP-HJ62AA
  • TLY-A2S3OP-HJG2AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP