GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | TLY-A130P-BJ64AA |
Series: | TLY and TL Servo Motors |
Description:
It is an Allen Bradley servo motor from the TLY series with 500 RMP-rated speed. It has a voltage rating of 200V Ac. Its frame size is 46 millimeters. Its enclosure contains an IP65 shaft key and standard metric as well as a brake. It has a high-turn encoder for feedback. For the interface, it uses a cable with round connectors. This low inertia servo motor provides stable control over motors.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The TLY-A130P-BJ64AA is the low inertia servo motor. It is an Allen Bradley/ Rockwell Automation unit from the TLY and TL servo motors product line. Its Ac input power is rated at 200v and contains a NEMA 17 frame size which equates to 46 mm. It contains a magnetic stack length of 3o inches and uses the special quality of magnet, and because of that, this unit can provide a low level of inertia compared to its counterparts. This servo motor is robust in terms of its 5000 RPM. Moreover, it generates feedback from its multi turn encoder and provides a battery function, especially for the back ups. Besides that, its protective enclosure includes an IP65 rating. Aside from that, it has a shaft key without a seal, and for the mounting connection, it uses circular connectors and a 1 meter cable. One of its primary functions is to give control for the greater load to motor inertia rate, and as a result, this whole process smoothes the operation of the motor. It has a flange mount, a standard motor type, and rotary servo motor characteristics. It does not have a food-grade rating but includes a round plastic motor end with an inbuilt cable option. In terms of the TLY series in general, it offers a powerful high turn encoder functionality that eliminates the need for a housing process and accelerates and simplifies startup. It also has a serial connection facility that automatically sends status information to the drive, saving installation time.
Manufacturer | Allen Bradley |
Series | TL-Series Motors |
Product Type | Brushless AC Synchronous Servo Motors |
Kinetix Compatibility | offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives |
Frame Sizes | Metric and NEMA frame sizes |
Magnets | High-energy Neodymium-Iron-Boron (NeFeB) magnets |
Cable Extensions | 1 m (3.2ft) |
Certifications | TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information |
Continuous stall torque | 0.086...5.42 N*m (0.76...48 lb*in) |
Peak stall torque | 0.22...13 N*m (1.94...115 lb*in) |
Motor rated output | 0.037...2.0 kW |
Compatible servo drives | Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000 |
Voltage Class | 200V-class windings |
Frame Size | 46 mm (1.81 in.) or NEMA 17 |
Motor stack length | Three stack |
Rated Speed | 5000 rpm |
Feedback | Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol) |
Enclosure | IP65 housing |
Shaft key | Has Shaft key |
Shaft Seal | No Shaft seal |
Connectors | Cables with circular connectors, 1 m (39.4 in.) |
Brake | 24V DC Brake |
Factory Options | Standard Metric |
MPN | TLY-A130P-BJ64AA |
Question: Does Automation Stop offer repairs on the TLY-A130P-BJ64AA?
Answer: Yes. We offer repairs for the TLY-A130P-BJ64AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and TLY-A130P-BJ64AA?
Answer: If you buy the TLY-A130P-BJ64AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the TLY-A130P-BJ64AA online?
Answer: Yes. Automation Stop sells the TLY-A130P-BJ64AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA is made by Allen Bradley - Motors.
Question: What type of product is the TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA is part of the TLY and TL Servo Motors series.
Question: What is the Brake of the TLY-A130P-BJ64AA?
Answer: The Allen Bradley TLY-A130P-BJ64AA has a Brake of 24 volts DC Brake.
Question: What is the Cable Extensions of the TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA has a Cable Extensions of 1 m (3.2ft).
Question: What Certifications are included with the Rockwell-Automation TLY-A130P-BJ64AA?
Answer: The Rockwell-Automation TLY-A130P-BJ64AA has Certifications TL-Series rotary motors are CE marked for all applicable directives. Refer to http://www.ab.com for more information.
Question: What is the Compatible servo drives of the TLY-A130P-BJ64AA?
Answer: The Compatible servo drives of the Allen-Bradley TLY-A130P-BJ64AA is Kinetix 3, Kinetix 300/350, Kinetix 2000, Kinetix 6000, Ultra3000.
Question: What is the Connectors of the Rockwell-Automation TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA has a Connectors of Cables with circular connectors, 1 m (39.4 in.).
Question: What is the Continuous stall torque of the Rockwell-Automation TLY-A130P-BJ64AA?
Answer: The Continuous stall torque of the Rockwell-Automation TLY-A130P-BJ64AA is 0.086...5.42 N*m (0.76...48 lb*in).
Question: What is the Enclosure of the Rockwell-Automation TLY-A130P-BJ64AA?
Answer: The Rockwell-Automation TLY-A130P-BJ64AA has a Enclosure of IP65 housing.
Question: What Factory Options are included with the TLY-A130P-BJ64AA?
Answer: The Allen Bradley/Rockwell Automation TLY-A130P-BJ64AA has Factory Options Standard Metric.
Question: What is the Feedback of the TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA has a Feedback of Multi-turn (Single turn if used without battery backup), 17-bit (131,072) counts/revolution, absolute, battery-backed encoder (serial protocol).
Question: What Frame Size does the Allen-Bradley TLY-A130P-BJ64AA have?
Answer: The Frame Size of the Allen-Bradley TLY-A130P-BJ64AA is 46 mm (1.81 in.) or NEMA 17.
Question: What kind of Frame Sizes does the TLY-A130P-BJ64AA have?
Answer: The TLY-A130P-BJ64AA has Frame Sizes Metric and NEMA frame sizes.
Question: What Kinetix Compatibility does the TLY-A130P-BJ64AA have?
Answer: The TLY-A130P-BJ64AA has a Kinetix Compatibility of offers Kinetix Integrated Motion when used with the Kinetix2000, Kinetix6000, or ULTRA3000 drives.
Question: What Magnets are included with the Allen Bradley/Rockwell Automation TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA has Magnets High-energy Neodymium-Iron-Boron (NeFeB) magnets.
Question: What Motor rated output does the Rockwell-Automation TLY-A130P-BJ64AA have?
Answer: The Rockwell-Automation TLY-A130P-BJ64AA has a Motor rated output of 0.037...2.0 kW.
Question: What Motor stack length is included with the TLY-A130P-BJ64AA?
Answer: The Rockwell Automation TLY-A130P-BJ64AA has a Three stack Motor stack length.
Question: What is the Peak stall torque of the TLY-A130P-BJ64AA?
Answer: The Peak stall torque of the Rockwell-Automation TLY-A130P-BJ64AA is 0.22...13 N*m (1.94...115 lb*in).
Question: What Product Type does the TLY-A130P-BJ64AA have?
Answer: The Rockwell Automation TLY-A130P-BJ64AA has a Brushless alternating current (AC) Synchronous Servo Motors Product Type.
Question: What is the Rated Speed of the TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: What Shaft key does the TLY-A130P-BJ64AA have?
Answer: The TLY-A130P-BJ64AA has a Has Shaft key Shaft key.
Question: Does the TLY-A130P-BJ64AA have a Shaft Seal?
Answer: No Shaft seal.
Question: What is the Voltage Class of the TLY-A130P-BJ64AA?
Answer: The TLY-A130P-BJ64AA has a Voltage Class of 200V-class windings.
For additional information about TLY-A130P-BJ64AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding TLY-A130P-BJ64AA.
Revision Part # | Also Known As | Availability |
---|---|---|
TLY-A130P-BJ64AA/A | TLY-A130P-BJ64AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.