GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1653E-MJ72AA |
Series: | MPM Servo Motors |
Description:
The MPM-B1653E-MJ72AA from Allen-Bradley is a medium-inertia MP servo motor. It has a base rotational speed of 2250 rpm, a stated speed of 3000 rpm, and a speed limit of 3500 rpm. It has a multiturn encoder, a continuous motor torque of 26.8 Newton meters, alternating current (AC) armature windings of 460 volts, an operating voltage of 400 volts AC, a frame diameter of 165 millimeters, and three (3) magnet stacks. It also has keyed shaft & round DIN connectors.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPM-B1653E-MJ72AA rotary servo motor is from MP Medium Inertia (MPM) series. It has IEC standard installation dimensions and rotating DIN connectors, which take into account adaptable connector direction for simpler link steering. This motor provides amazing speed & torque efficiency, feedback mechanism, and rotor inertias. The MPM-B1653E-MJ72AA has a base speed of 2250 revolutions per minute (rpm). The speed of this device, however, maxes out at 3500 rpm. At its rated speed of 3000 rpm, it can have an output of 5.10 kilowatts (kW). This product has a stall torque of 26.8 Newton meters (Nm) when operating continuously. Additionally, it has an input current rated at 27.0 amperes (A). It yields 62 Newton meters (Nm) of peak torque while drawing a current of 73 amperes. It has evaluated rotor inertia of 0.008025 kg-m². This device requires 400 volts alternating current (AC) to operate properly. This device is equipped with 3 magnet stacks. Its armature windings have a rating of 460 volts AC. This Allen-Bradley device is also equipped with multi-turn high-resolution feedback. The Hiperface protocol is also featured within this Allen-Bradley servo motor.
Part number MPM-B1653E-MJ72AA has a frame that measures 165 millimeters and weighs around 25.6 kilograms. It offers an IP standard of IP 50 when there is no shaft seal. It can achieve an IP67 rating by adding harmless ecosystem link connectors and a seal for the shaft. Additionally, it has a keyed shaft. This steel key provides the function of tightening while attaching mechanical parts to the motor's shaft.
MPN | MPM-B1653E-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 165 mm |
Magnet Stacks | 3 stacks |
Base Speed | 2250 rpm |
Feedback | Multi-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1653E-MJ72AA?
Answer: Yes. We offer repairs for the MPM-B1653E-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1653E-MJ72AA?
Answer: If you buy the MPM-B1653E-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1653E-MJ72AA online?
Answer: Yes. Automation Stop sells the MPM-B1653E-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1653E-MJ72AA?
Answer: The MPM-B1653E-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPM-B1653E-MJ72AA?
Answer: The MPM-B1653E-MJ72AA is part of the MPM Servo Motors series.
Question: What Base Speed does the MPM-B1653E-MJ72AA have?
Answer: The MPM-B1653E-MJ72AA has a Base Speed of 2250 revolutions per minute (RPM).
Question: Does the Rockwell Automation MPM-B1653E-MJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the MPM-B1653E-MJ72AA have?
Answer: The Connectors of the MPM-B1653E-MJ72AA is Circluar, right angle, 180 degree rotatable.
Question: What is the Enclosure/Shaft Key/Shaft Seal of the MPM-B1653E-MJ72AA?
Answer: The MPM-B1653E-MJ72AA has a Enclosure/Shaft Key/Shaft Seal of IP65/IP67 housing/shaft key/no shaft seal.
Question: What kind of Factory Designated Options does the MPM-B1653E-MJ72AA have?
Answer: The MPM-B1653E-MJ72AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback is included with the MPM-B1653E-MJ72AA?
Answer: The MPM-B1653E-MJ72AA has a Multi-turn high-resolution encoder Feedback.
Question: What is the Frame Size-Bolt Circle Diameter of the MPM-B1653E-MJ72AA?
Answer: The Allen Bradley/Rockwell Automation MPM-B1653E-MJ72AA has a Frame Size-Bolt Circle Diameter of 165 mm.
Question: What Magnet Stacks does the MPM-B1653E-MJ72AA have?
Answer: The Magnet Stacks of the MPM-B1653E-MJ72AA is 3 stacks.
Question: What Mounting Flange does the MPM-B1653E-MJ72AA have?
Answer: The Allen-Bradley MPM-B1653E-MJ72AA has a IEC metric Mounting Flange.
Question: What Voltage Class does the Allen Bradley Automation MPM-B1653E-MJ72AA have?
Answer: The Voltage Class of the MPM-B1653E-MJ72AA is 400V.
For additional information about MPM-B1653E-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1653E-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1653E-MJ72AA/A | MPM-B1653E-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.