GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1651F-MJ72AA |
Series: | MPM Servo Motors |
Description:
Part number MPM-B1651F-MJ72AA is a 3,000-rpm servo motor with a 10.7-Newton-meter (Nm) torque by Allen-Bradley. It has a key shaft, a flange mount, is small in size, and has a good power-to-weight proportion. It features 460-volt AC armature windings, encoder feedback, a weight of approximately 15.30 kg, and IEC metric mounting dimensions. It has a 5,000-rpm maximum speed rating and rotary DIN connectors for configurable connector position. It has a 165-millimeter frame and one magnet stack.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPM-B1651F-MJ72AA is a medium-inertia servo motor from the MPM series. It comes with rotational motion controlling and is ideal for applications that need large inertias plus accurate motion. It also meets the necessary motor weight, functionality, and size requirements. It's a flange mount, and there's no brake on it. It makes use of SpeedTec DIN (M7 type) connectors. These connectors are for a versatile cable configuration since they may be turned from 180 degrees clockwise or counterclockwise along their axis. It has a hiperface protocol and an absolute multi-turn feedback type featuring sin/cos 1024 resolution.
The MPM-B1651F-MJ72AA has a rated rotation base velocity of 3,000 revolutions per minute (rpm) and a maximum rotation speed of 5,000 revolutions per minute (rpm). It has a magnetic stack length of one (1) magnet stack and a 165-millimeter frame. It has a 400-volt AC voltage rating and shaft with no seal & steel key. This motor is using permanent magnets as a magnetic field source and 460 volts AC windings as an armature. It produces a steady torque of 10.7 Newton-meters (Nm)and a maximum torque of 23.2 Newton-meters (Nm). It has a continuous output of 2.50 kilowatts at 3,000 rpm. Its rotor has an inertia of 0.006745 kg-m². It is capable of operating at temperatures spanning from 0 to 40 degrees Celsius. It may be preserved at temperatures spanning from -30 to 70 degrees Celsius. It has a weight of 15.30 kg. It has an IP67 rating if a shaft seal and environmentally friendly plugs are used.
MPN | MPM-B1651F-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 165 mm |
Magnet Stacks | 1 stack |
Base Speed | 3000 rpm |
Feedback | Multi-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1651F-MJ72AA?
Answer: Yes. We offer repairs for the MPM-B1651F-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1651F-MJ72AA?
Answer: If you buy the MPM-B1651F-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1651F-MJ72AA online?
Answer: Yes. Automation Stop sells the MPM-B1651F-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1651F-MJ72AA?
Answer: The MPM-B1651F-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPM-B1651F-MJ72AA?
Answer: The MPM-B1651F-MJ72AA is part of the MPM Servo Motors series.
Question: What Base Speed does the Allen Bradley/Rockwell Automation MPM-B1651F-MJ72AA have?
Answer: The Base Speed of the MPM-B1651F-MJ72AA is 3000 revolutions per minute (RPM).
Question: Does the Rockwell-Automation MPM-B1651F-MJ72AA have a Brake?
Answer: No brake.
Question: What is the Connectors of the MPM-B1651F-MJ72AA?
Answer: The Connectors of the Rockwell-Automation MPM-B1651F-MJ72AA is Circluar, right angle, 180 degree rotatable.
Question: What is the Enclosure/Shaft Key/Shaft Seal of the Allen Bradley MPM-B1651F-MJ72AA?
Answer: The MPM-B1651F-MJ72AA has a Enclosure/Shaft Key/Shaft Seal of IP65/IP67 housing/shaft key/no shaft seal.
Question: What kind of Factory Designated Options does the Allen Bradley Automation MPM-B1651F-MJ72AA have?
Answer: The MPM-B1651F-MJ72AA has Factory Designated Options Standard factory configuration.
Question: What Feedback is included with the Allen Bradley-Rockwell Automation MPM-B1651F-MJ72AA?
Answer: The Allen Bradley-Rockwell Automation MPM-B1651F-MJ72AA has a Multi-turn high-resolution encoder Feedback.
Question: What is the Frame Size-Bolt Circle Diameter of the MPM-B1651F-MJ72AA?
Answer: The Allen Bradley/Rockwell Automation MPM-B1651F-MJ72AA has a Frame Size-Bolt Circle Diameter of 165 mm.
Question: What Magnet Stacks does the Allen Bradley-Rockwell Automation MPM-B1651F-MJ72AA have?
Answer: The Magnet Stacks of the Allen Bradley-Rockwell Automation MPM-B1651F-MJ72AA is 1 stack.
Question: What Mounting Flange does the Allen-Bradley MPM-B1651F-MJ72AA have?
Answer: The MPM-B1651F-MJ72AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the MPM-B1651F-MJ72AA?
Answer: The Rockwell Automation MPM-B1651F-MJ72AA has a Voltage Class of 400V.
For additional information about MPM-B1651F-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1651F-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1651F-MJ72AA/A | MPM-B1651F-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.