GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Servo Motor |
Part Number: | MPM-B1304M-MJ72AA |
Series: | MPM Servo Motors |
Description:
The MPM-B1304M-MJ72AA is a permanent magnet rotary medium-inertia servo motor manufactured by Allen-Bradley / Rockwell Automation. The servo motor is equipped with a multi-turn high-resolution encoder for absolute feedback. The motor has a frame size of130 mm, or the equivalent of 5.12 inches. This servo motor is equipped with 4 magnet stacks. The motor operates at a voltage of 400 volts AC. Its speed is rated at 4500 revolutions per minute (rpm).
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number MPM-B1304M-MJ72AA, which was designed and manufactured by Allen Bradley, is a permanent magnet rotary medium-inertia servo motor with a speed rating of 4500 revolutions per minute (rpm). The servo motor comes equipped with a multi-turn high-resolution encoder for providing absolute feedback. The motor is not designed with a brake or a shaft seal. It is packaged in an IP65/ IP67 rated enclosure protecting it from environmental damage.
The MPM-B1304M-MJ72AA motor has an operating voltage of 400 volts AC. Its speed is rated at 4500 rpm and the base speed does not go over 6000 rpm in an instant. It has a power of 2.2 kilowatts when operating continuously. The motor has a continuous output torque of 10.2 Nm, as well as a maximum torque of 27.1 Nm. The motor has a frame size that measures 130 mm, or 5.12 inches, and is equipped with 4 magnet stacks. The motor is designed to support external connections through right angled circular SpeedTec DIN connectors. However, the motor is not equipped with any braking mechanism.
To prevent any EMC/EMI damage to the MPM-B1304M-MJ72AA motor, the input power should be channeled through isolated power transformers or line filters, and cables for power and signal lines should be kept separate. Moreover, proper grounding mechanisms should be used to prevent further damage. The MPM-B1304M-MJ72AA is designed to be compatible with Kinetix drive series 5500 Bulletin 2198. The motor has a storage temperature storage of -30 to 70 degrees Celsius. It weighs approximately 9.6 kilograms and is flange mounted.
MPN | MPM-B1304M-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Medium-inertia Servo Motor with 115mm to 215 mm Frame Size |
Voltage Class | 400V |
Frame Size-Bolt Circle Diameter | 130 mm |
Magnet Stacks | 4 stacks |
Base Speed | 4500 rpm |
Feedback | Multi-turn high-resolution encoder |
Enclosure/Shaft Key/Shaft Seal | IP65/IP67 housing/shaft key/no shaft seal |
Connectors | Circluar, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC metric |
Factory Designated Options | Standard factory configuration |
Question: Does Automation Stop offer repairs on the MPM-B1304M-MJ72AA?
Answer: Yes. We offer repairs for the MPM-B1304M-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPM-B1304M-MJ72AA?
Answer: If you buy the MPM-B1304M-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPM-B1304M-MJ72AA online?
Answer: Yes. Automation Stop sells the MPM-B1304M-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPM-B1304M-MJ72AA?
Answer: The MPM-B1304M-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPM-B1304M-MJ72AA?
Answer: The MPM-B1304M-MJ72AA is part of the MPM Servo Motors series.
Question: What Base Speed does the MPM-B1304M-MJ72AA have?
Answer: The Base Speed of the MPM-B1304M-MJ72AA is 4500 revolutions per minute (RPM).
Question: Does the Rockwell-Automation MPM-B1304M-MJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the MPM-B1304M-MJ72AA have?
Answer: The MPM-B1304M-MJ72AA has a Connectors of Circluar, right angle, 180 degree rotatable.
Question: What is the Enclosure/Shaft Key/Shaft Seal of the Allen Bradley MPM-B1304M-MJ72AA?
Answer: The Enclosure/Shaft Key/Shaft Seal of the MPM-B1304M-MJ72AA is IP65/IP67 housing/shaft key/no shaft seal.
Question: What Factory Designated Options are included with the MPM-B1304M-MJ72AA?
Answer: The Allen Bradley/Rockwell Automation MPM-B1304M-MJ72AA includes Standard factory configuration for its Factory Designated Options.
Question: What Feedback is included with the MPM-B1304M-MJ72AA?
Answer: The Rockwell Automation MPM-B1304M-MJ72AA has a Multi-turn high-resolution encoder Feedback.
Question: What Frame Size-Bolt Circle Diameter does the MPM-B1304M-MJ72AA have?
Answer: The Allen Bradley/Rockwell Automation MPM-B1304M-MJ72AA has a Frame Size-Bolt Circle Diameter of 130 mm.
Question: What is the Magnet Stacks of the MPM-B1304M-MJ72AA?
Answer: The MPM-B1304M-MJ72AA has a Magnet Stacks of 4 stacks.
Question: What Mounting Flange is included with the MPM-B1304M-MJ72AA?
Answer: The Rockwell-Automation MPM-B1304M-MJ72AA has a IEC metric Mounting Flange.
Question: What is the Voltage Class of the Allen Bradley Automation MPM-B1304M-MJ72AA?
Answer: The Voltage Class of the MPM-B1304M-MJ72AA is 400V.
For additional information about MPM-B1304M-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPM-B1304M-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPM-B1304M-MJ72AA/A | MPM-B1304M-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.