GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B580J-SK72AA |
Series: | MPL Servo Motors |
Description:
The MPL-B580J-SK72AA from Allen-Bradley is a permanent magnet synchronous servo motor. It is a brushless-type motor and, therefore, offers high torques and speed. It has a maximum rotary speed of 3750 rpm at low inertia. It is of the alternating current component and requires 400 volts. It encompasses a 165-millimeter frame, IEC measurements, and an 8-inch-long magnet stack. It has a single-turn encoder, which just provides exact location feedback for a single turn.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
MPL-B580J-SK72AA is the finest choice for applications such as material handling, which demands an efficient motion system. It is low inertia and an accurate position servo motor. Because it features a feedback mechanism based on a traditional single-turn encoder, this installed encoder provides the angles for one turn only. Additionally, it does not count the number of turns beyond one. The MPL-B580J-SK72AA is a synchronized machine and uses permanent magnets, with 8-inch-long magnetic stacks, to substitute field windings and has a 400 volts AC-class armature winding. Strong, rare-earth magnets with great intensity are employed in this motor. As a result, it boasts better speed and torque performance. This motor has a rotating rate of 3750 revolutions per minute (rpm) and can gain a speed of up to 3800 rpm. It has a constant torque of 301 pounds-inch (34.0 Newton-meters), as well as a peak torque of 81 Newton-meters (716 pounds - inch).
The motor is developed per IEC standard measurements. It bears a frame that measures 165 millimeters (IEC metric 72-1). For external connections, it incorporates circular DIN connections. They are rotatable half-revolution both ways. This motor has following speed versus radial load ratings: 106 kilograms at 3000 rpm, 121 kg at 2000 rpm, and 153 kg at 1000 rpm. This device has the following speed vs axial load ratings: 32 kilograms at 3000 rpm, 43 kg at 2000 rpm, and 52 kg at 1000 rpm. It weighs approximately 56 pounds, or 25.4 kilograms, with a rotor inertia of 0.023 lb-in-s². This device has a rated power of 7900 watts.
MPN | MPL-B580J-SK72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 8 in |
Rated Speed | 3750 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | No shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B580J-SK72AA?
Answer: Yes. We offer repairs for the MPL-B580J-SK72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B580J-SK72AA?
Answer: If you buy the MPL-B580J-SK72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B580J-SK72AA online?
Answer: Yes. Automation Stop sells the MPL-B580J-SK72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B580J-SK72AA?
Answer: The MPL-B580J-SK72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B580J-SK72AA?
Answer: The MPL-B580J-SK72AA is part of the MPL Servo Motors series.
Question: Does the MPL-B580J-SK72AA have a Brake?
Answer: No brake.
Question: What Connectors does the Allen-Bradley MPL-B580J-SK72AA have?
Answer: The Connectors of the MPL-B580J-SK72AA is Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the Allen Bradley-Rockwell Automation MPL-B580J-SK72AA?
Answer: The MPL-B580J-SK72AA includes Standard for its Factory Designated Options.
Question: What Feeback is included with the MPL-B580J-SK72AA?
Answer: The Allen Bradley MPL-B580J-SK72AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen Bradley/Rockwell Automation MPL-B580J-SK72AA?
Answer: The MPL-B580J-SK72AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the Allen Bradley MPL-B580J-SK72AA?
Answer: The Allen Bradley MPL-B580J-SK72AA has a Magnetic Stack Length of 8 in.
Question: What Mounting Flange is included with the MPL-B580J-SK72AA?
Answer: The MPL-B580J-SK72AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-B580J-SK72AA have?
Answer: The MPL-B580J-SK72AA has a Rated Speed of 3750 revolutions per minute (RPM).
Question: Does the MPL-B580J-SK72AA have a Shaft Key/Seal?
Answer: No shaft key/no shaft seal.
Question: What Voltage Class does the Rockwell Automation MPL-B580J-SK72AA have?
Answer: The MPL-B580J-SK72AA has a Voltage Class of 400V.
For additional information about MPL-B580J-SK72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B580J-SK72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B580J-SK72AA/A | MPL-B580J-SK72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.