GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B580J-SJ22AA |
Series: | MPL Servo Motors |
Description:
Allen-Bradley's MPL-B580J-SJ22AA servo motor is developed around smart motor technology. It is a smaller size servo motor with higher torques. This device has numerous characteristics associated with it, which include low inertia, a keyed shaft, a rated speed of 3750 revolutions per minute (rpm), and a continuous supply of 34.0 Newton-meters stall torque. This Allen-Bradley product has a 165-millimeter frame size, a 400 volts alternating current winding armature, IEC free mounting holes, an 8-inch magnet stack length, bayonet connectors, and 360 degrees feedback with a single turn count.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPL family's product, the MPL-B580J-SJ22AA, features high torques (on output), small inertia, and a brushless rotary servo. It employs innovative design features to mitigate motor size while offering much higher torque. This synchronous motor with windings of 400 volts (armature) has permanent magnets. Moreover, it only permits an alternating current (AC) through its windings for field generation, and the winding's voltage indicated is likewise an AC rating. This Allen-Bradley device uses powerful rare earth permanent magnets (PM) to establish a magnetic field, with the PM stacks on 8.00 inches of length. The use of permanent magnets, despite the motor's tiny size, allows this motor to attain a speed of 3750 rpm (revolutions per minute) nominal and 3800 rpm maximum. The motor's frame is just 165 millimeters, and the total weight of the motor is approximately 25.4 kilograms.
MPL-B580J-SJ22AA's frame specifications match the IEC 72-1 standard, and this servo motor has a flat-mounted design. It possesses a classic rotary encoder, as well as a single-turn encoder that provides only 360-degree feedback (1 rotor's turn). It can provide 7.9 kilowatts of power and 34.0 Newton-meters of stall torque (rated continuous value). Its bearings can work fine up to 200,000 hours if loads limits are kept under the following ratings: 32 kg axial load and 153 kg radial load. It also includes a mechanical keyed shaft for a secure fit mechanical attachment. The circular bayonet connectors, which are non-rotatable, are located on it. All cables, such as feedback and a power supply, are attached to the motor via these connectors.
MPN | MPL-B580J-SJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 8 in |
Rated Speed | 3750 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B580J-SJ22AA?
Answer: Yes. We offer repairs for the MPL-B580J-SJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B580J-SJ22AA?
Answer: If you buy the MPL-B580J-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B580J-SJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B580J-SJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B580J-SJ22AA?
Answer: The MPL-B580J-SJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B580J-SJ22AA?
Answer: The MPL-B580J-SJ22AA is part of the MPL Servo Motors series.
Question: Does the Allen Bradley Automation MPL-B580J-SJ22AA have a Brake?
Answer: No brake.
Question: What kind of Connectors does the MPL-B580J-SJ22AA have?
Answer: The Rockwell-Automation MPL-B580J-SJ22AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the Rockwell Automation MPL-B580J-SJ22AA?
Answer: The MPL-B580J-SJ22AA has Factory Designated Options Standard.
Question: What Feeback is included with the MPL-B580J-SJ22AA?
Answer: The MPL-B580J-SJ22AA has a Single-turn high-resolution encoder Feeback.
Question: What Frame Size does the Allen Bradley Automation MPL-B580J-SJ22AA have?
Answer: The MPL-B580J-SJ22AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the Rockwell-Automation MPL-B580J-SJ22AA?
Answer: The Magnetic Stack Length of the Rockwell-Automation MPL-B580J-SJ22AA is 8 in.
Question: What Mounting Flange does the Rockwell Automation MPL-B580J-SJ22AA have?
Answer: The Rockwell Automation MPL-B580J-SJ22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the Rockwell-Automation MPL-B580J-SJ22AA have?
Answer: The Rated Speed of the Rockwell-Automation MPL-B580J-SJ22AA is 3750 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B580J-SJ22AA have?
Answer: The MPL-B580J-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the Rockwell-Automation MPL-B580J-SJ22AA?
Answer: The Voltage Class of the MPL-B580J-SJ22AA is 400V.
For additional information about MPL-B580J-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B580J-SJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B580J-SJ22AA/A | MPL-B580J-SJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.