GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B580J-MJ74AA |
Series: | MPL Servo Motors |
Description:
This Allen Bradley MPL-B580J-MJ74AA low inertia smart motor has a 165-millimeter frame. This MPL brushless servo motor has a rotational speed of 3750 RPM. Furthermore, it operates on 230 volts. The servo in this MPL motor has a multi-turn (high-resolution) encoder fitted.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-B580J-MJ74AA is a servo motor manufactured by Allen-Bradley/Rockwell Automation as part of the MPL product line. The motor has a rating of 3750 revolutions per minute (RPM) and is a microprocessor-controlled low-inertia synchronous AC servo motor. This module runs on an input voltage of 400 volts AC and delivers an output power of 7.9 kilowatts. It has a standard IEC metric flange designed for mounting the innovative technology-conscious MPL series servo motors such as the MPL-B580J-MJ74AA servo motor. It offers a higher torque of up to 40 percent higher than torque compared to conventional servo motors. The rare-earth magnets used to construct the servo motor results in quicker acceleration. These servo motors feature the smart motor technology with an integrated memory that retains the identity of the motor as well as the communication links reporting the identity to the system when it starts up, also causing a lesser commissioning time.
The MPL-B580J-MJ74AA servo motor has rotor inertia of 0.00289 kg-m2, with a peak continuous stall current of 115 amperes and 32 amperes, respectively. The continuous and peak stall torque ratings are 34 N-m and 87 N-m, respectively. This servo motor featues 165 millimeters frame size, with 203.2 millimeters of magnet stack length. It also has a SpeedTec DIN connector that allows for flexible 180 degrees rotatable connector orientation, and it also enables the use of the common cable family for several servo motors in the MPL series. It has a Hiperface protocol that is supported by 1024 sin/cos absolute multi-turn feedback encoder.
The Allen-Bradley MPL-B580J-MJ74AA servo motor has a speed of 3750 rpm and is part of the MPL family of low-inertia synchronous AC motors. It has a 400-volt AC input and produces 7.9 kilowatts of output power. For installation, the motor comes with a standard IEC metric flange. The MPL series servo motors, such as the MPL-B580J-MJ74AA servo motor, have an innovative winding technique that produces up to 40% more torque than standard servo motors. The use of rare-earth magnets in the servo motor design allows for faster acceleration. The smart motor technology comprises onboard memory that saves the motor's identification, and communications links that report the motors to identify to the system as it starts up, reducing commissioning time. It has a rotor inertia of 0.00289 kg-m2 and stalls currents of 32 amperes and 115 amperes, accordingly. The torque ratings for the continuous and peak stalls are 34 N-m and 87 N-m, respectively. The magnet stack length of the servo motor is 203.2 millimeters, and the frame size is 165 millimeters. The SpeedTec DIN connection on the servo motor provides for variable connector orientation (180 degrees rotatable) and allows all MPL series servo motors to share a similar cable family. The 1024 sin/cos absolute multi-turn feedback encoder supports the Hiperface protocol. A 24 Volt DC brake and a shaft key are also supplied with the MPL-B580J-MJ74AA servo motor. A shaft seal is not included with the servo motor. In order to achieve an IP 66 environmental protection certification, an optional shaft seal kit is available. The shaft seal acts as a barrier between the motor bearings and the damaging effects of dust and moisture. Shaft seals deteriorate with time, thus Allen-Bradley recommends inspecting and replacing old seals on a regular basis.
MPN | MPL-B580J-MJ74AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 8 in |
Rated Speed | 3750 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B580J-MJ74AA?
Answer: Yes. We offer repairs for the MPL-B580J-MJ74AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B580J-MJ74AA?
Answer: If you buy the MPL-B580J-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B580J-MJ74AA online?
Answer: Yes. Automation Stop sells the MPL-B580J-MJ74AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B580J-MJ74AA?
Answer: The MPL-B580J-MJ74AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B580J-MJ74AA?
Answer: The MPL-B580J-MJ74AA is part of the MPL Servo Motors series.
Question: What is the Brake of the MPL-B580J-MJ74AA?
Answer: The Brake of the MPL-B580J-MJ74AA is 24 volts direct current brake.
Question: What is the Connectors of the Allen Bradley-Rockwell Automation MPL-B580J-MJ74AA?
Answer: The Connectors of the MPL-B580J-MJ74AA is Circular DIN, right angle, 180 degree rotatable.
Question: What kind of Factory Designated Options does the MPL-B580J-MJ74AA have?
Answer: The MPL-B580J-MJ74AA includes Standard for its Factory Designated Options.
Question: What Feeback is included with the Allen Bradley/Rockwell Automation MPL-B580J-MJ74AA?
Answer: The Allen Bradley/Rockwell Automation MPL-B580J-MJ74AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Allen-Bradley MPL-B580J-MJ74AA?
Answer: The MPL-B580J-MJ74AA has a Frame Size of 165 mm.
Question: What Magnetic Stack Length does the Rockwell-Automation MPL-B580J-MJ74AA have?
Answer: The MPL-B580J-MJ74AA has a Magnetic Stack Length of 8 in.
Question: What Mounting Flange is included with the Allen Bradley Automation MPL-B580J-MJ74AA?
Answer: The Allen Bradley Automation MPL-B580J-MJ74AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B580J-MJ74AA?
Answer: The MPL-B580J-MJ74AA has a Rated Speed of 3750 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B580J-MJ74AA have?
Answer: The Allen-Bradley MPL-B580J-MJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the Rockwell Automation MPL-B580J-MJ74AA?
Answer: The Voltage Class of the Rockwell Automation MPL-B580J-MJ74AA is 400V.
For additional information about MPL-B580J-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B580J-MJ74AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B580J-MJ74AA/A | MPL-B580J-MJ74AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.