GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B580J-MJ72AA |
Series: | MPL Servo Motors |
UPC: | 820919984297 |
Description:
The MPL-B580J-MJ72AA is a low inertia rotary, alternating current, actuator, which is a rotary machine from Allen-Bradley's MPL series. It has a 165-millimeter frame, an 8.0-inch magnet stack, a rotating velocity of 3750 revolutions per minute (rpm), multi-turn encoder feedback, no holding brake, and a shaft with a steel-composed key without any seal. It also makes use of speed tech circular connectors and an FF type mount flange (IEC metric).
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's MPL-B580J-MJ72AA is an alternating current (AC) type synchronous permanent magnet (PM) servo motor. It is ideal for industrial and laboratory applications which are seeking precision in measurement values of velocity, torque, or position. It involves the use of powerful permanent magnets arranged on a rotor with a length of the stack of about eight (8) inches. It is described as IEC 60072 - 1 rotary motion system featuring a mounting flange with a one hundred and sixty-five (165)-millimeter frame. Its electrical needs are consistent with those of the high voltage class, spanning from thirty (30) to one thousand (1000) volts alternating current (commonly known as class B), with an operating voltage of four hundred (400) volts.
The MPL-B580J-MJ72AA's feedback, brake, and power connections are round SpeedTech (DIN). For maximum torque controlling, a rotary multiturn encoder is implanted in this motor to detect the position of the rotor. It offers high precise feedback as compared to the single-turn encoder. It can count approximately 4096 turns of the rotor. These DIN connectors can make one hundred and eighty (180) degrees of rotation clockwise and counterclockwise. It has an intended, as well as a maximum, speed of 3750 revolutions per minute (rpm). It's rated for a constant stall torque of three hundred and two (302) lb-in. It has a peak stall torque of seven hundred and sixteen (716) lb-in. and rotating inertia of 0.00289 lb-in-s². This motor has a weight of approximately fifty-six (56) pounds and has a key option for a shaft for secured mechanical mating.
MPN | MPL-B580J-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 165 mm |
Magnetic Stack Length | 8 in |
Rated Speed | 3750 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B580J-MJ72AA?
Answer: Yes. We offer repairs for the MPL-B580J-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B580J-MJ72AA?
Answer: If you buy the MPL-B580J-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B580J-MJ72AA online?
Answer: Yes. Automation Stop sells the MPL-B580J-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B580J-MJ72AA?
Answer: The MPL-B580J-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B580J-MJ72AA?
Answer: The MPL-B580J-MJ72AA is part of the MPL Servo Motors series.
Question: Does the Allen Bradley/Rockwell Automation MPL-B580J-MJ72AA have a Brake?
Answer: No brake.
Question: What Connectors does the Allen Bradley/Rockwell Automation MPL-B580J-MJ72AA have?
Answer: The Connectors of the Allen Bradley/Rockwell Automation MPL-B580J-MJ72AA is Circular DIN, right angle, 180 degree rotatable.
Question: What kind of Factory Designated Options does the Allen-Bradley MPL-B580J-MJ72AA have?
Answer: The MPL-B580J-MJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-B580J-MJ72AA have?
Answer: The Rockwell Automation MPL-B580J-MJ72AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B580J-MJ72AA?
Answer: The Frame Size of the MPL-B580J-MJ72AA is 165 mm.
Question: What is the Magnetic Stack Length of the MPL-B580J-MJ72AA?
Answer: The Magnetic Stack Length of the Allen Bradley/Rockwell Automation MPL-B580J-MJ72AA is 8 in.
Question: What Mounting Flange is included with the Allen-Bradley MPL-B580J-MJ72AA?
Answer: The MPL-B580J-MJ72AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the Allen Bradley-Rockwell Automation MPL-B580J-MJ72AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B580J-MJ72AA has a Rated Speed of 3750 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the MPL-B580J-MJ72AA?
Answer: The Allen Bradley MPL-B580J-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What Voltage Class does the MPL-B580J-MJ72AA have?
Answer: The Voltage Class of the MPL-B580J-MJ72AA is 400V.
For additional information about MPL-B580J-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B580J-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B580J-MJ72AA/A | MPL-B580J-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.