GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPL-B540D-MJ74AA

Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B540D-MJ74AA
Series: MPL Servo Motors

Description:

Part number MPL-B540D-MJ74AA is a low inertia servo motor, produced by Allen-Bradley. Its power supply is rated at 400 volts AC, and it has a frame that measures 165 millimeters, as well as a magnetic stack that measures 4.0 inches. The motor speed of this product is 2000 revolutions per minute. It has an output signal and a shaft key. This motor has a holding brake, operates via a 24-volt DC input, and does not have shaft seal.


Key Features:

  • comes with circular din, right angle, 180 degrees rotatable connector
  • comes with iec metric mounting flange
  • offers a voltage class of 400 volts ac

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number MPL-B540D-MJ74AA is a premium permanent magnet rotary servo motor, manufactured by Allen-Bradley. It is part of the MPL low inertia servo motor family with a 100- to 165-millimeter frame size. The MPL series motors are known for their capability to deliver higher torque while having a compact design. It is three-phase motor with a power supply of 400 volts AC. Its frame size, related to flange IEC72-1, is 165 millimeters. The motor has a magnetic stack length of 4.0 inches. This unit has a rated speed of 2000 revolutions per minute (rpm). It has an output signal with multi-turn high resolution encoder feedback. The motor is equipped with a shaft key and its connectors are of circular DIN construction at a right angle for 180 degrees rotation. This motor is equipped with an IEC metric mounting flange, and its enclosure is rated for a standard environment.

The Allen-Bradley MPL-B540D-MJ74AA has a 24-volt DC brake, used for holding the motor shaft when there is no rotation. When voltage is applied. it will release the shaft. In the situation of a power failure, the brake can be used temporarily for stopping purposes, but it is important to know that this will create mechanical backlash that is dangerous for the system, and it can reduce brake’s life. In case the motor is used in environment unfit for its operation, where the shaft is with contact with fluids, solid particles, or even fine dust, there should be used additional shaft seal. When applied, this item serves to lubricate the shaft through an external lubricating oil gearbox.

Technical Specifications

MPN MPL-B540D-MJ74AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 165 mm
Magnetic Stack Length 4 in
Rated Speed 2000 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake 24V DC brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B540D-MJ74AA?

Answer: Yes. We offer repairs for the MPL-B540D-MJ74AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B540D-MJ74AA?

Answer: If you buy the MPL-B540D-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B540D-MJ74AA online?

Answer: Yes. Automation Stop sells the MPL-B540D-MJ74AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B540D-MJ74AA?

Answer: The MPL-B540D-MJ74AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B540D-MJ74AA?

Answer: The MPL-B540D-MJ74AA is part of the MPL Servo Motors series.


Question: What is the Brake of the MPL-B540D-MJ74AA?

Answer: The Allen Bradley-Rockwell Automation MPL-B540D-MJ74AA has a Brake of 24 volts direct current (DC) brake.


Question: What Connectors does the MPL-B540D-MJ74AA have?

Answer: The MPL-B540D-MJ74AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.


Question: What Factory Designated Options are included with the Allen Bradley MPL-B540D-MJ74AA?

Answer: The Allen Bradley MPL-B540D-MJ74AA includes Standard for its Factory Designated Options.


Question: What Feeback is included with the Allen Bradley MPL-B540D-MJ74AA?

Answer: The MPL-B540D-MJ74AA has a Multi-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the MPL-B540D-MJ74AA?

Answer: The Frame Size of the Allen-Bradley MPL-B540D-MJ74AA is 165 mm.


Question: What is the Magnetic Stack Length of the Rockwell-Automation MPL-B540D-MJ74AA?

Answer: The Rockwell-Automation MPL-B540D-MJ74AA has a Magnetic Stack Length of 4 in.


Question: What Mounting Flange does the Allen Bradley-Rockwell Automation MPL-B540D-MJ74AA have?

Answer: The Allen Bradley-Rockwell Automation MPL-B540D-MJ74AA has a IEC Metric Mounting Flange.


Question: What Rated Speed does the Allen Bradley Automation MPL-B540D-MJ74AA have?

Answer: The MPL-B540D-MJ74AA has a Rated Speed of 2000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the Rockwell-Automation MPL-B540D-MJ74AA?

Answer: The MPL-B540D-MJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What Voltage Class does the Allen Bradley/Rockwell Automation MPL-B540D-MJ74AA have?

Answer: The Voltage Class of the MPL-B540D-MJ74AA is 400V.


Series information for MPL-B540D-MJ74AA

For additional information about MPL-B540D-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B540D-MJ74AA.

Revision Part # Also Known As Availability
MPL-B540D-MJ74AA/A MPL-B540D-MJ74AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B54OD-MJ74AA
  • MPL-BS40D-MJ74AA
  • MPL-BS4OD-MJ74AA
  • MPL-8540D-MJ74AA
  • MPL-854OD-MJ74AA
  • MPL-8S40D-MJ74AA
  • MPL-8S4OD-MJ74AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP