GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPL-B520K-SJ72AA

✓ In Stock

Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B520K-SJ72AA
Series: MPL Servo Motors

Description:

Allen-Bradley's MPL-B520K-SJ72AA is a servo motor with a rotary actuator. It functions at an armature voltage of 400 volts AC (alternating current). It has permanent magnets to facilitate low inertia at high torques. The motor's magnetic stack is 2.0 inches long and its frame measures 165 millimeters. It can operate at a speed of up to 4000 rpm (revolutions per minute). It is equipped with an encoder-based feedback, DIN connectors, and a sealless shaft with a steel key.


Key Features:

  • ships with iec metric mounting flange
  • ships with 400 volts for voltage

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

MPL-B520K-SJ72AA belongs to the premium permanent magnet series of servo motors by Allen-Bradley / Rockwell Automation. It delivers high output (power & torque values) with low inertia in comparison with other motors of comparable size. It is from a class B, 400 volts category of alternating current (AC) voltage. This servo motor's frame comes with free mounting holes as per the IEC 72-1 criterion. Additionally, the size of the frame measures one hundred and sixty-five (165.0) millimeters. It contains a permanent magnetic stack spanning two (2) inches in along length. 

The MPL-B520K-SJ72AA is rated to run at 3500 revolutions per minute (rpm), but it can achieve a speed of 4000 revolutions per minute (rpm). At a maximum speed, the allowable radial force load is about eighty (80) kilograms (kg), and the axial load is about twenty-two (22) kilograms (kg). When there is an rise in the radial and axial loads forces, the motor's velocity drops consequently. The motor's speed drops to approximately one thousand (1000) rpm at the radial load of about one hundred and twenty-seven (127) kilograms (kg) and an axial load of about forty-two (42) kilograms (kg). It has a single-turn encoder which delivers precise shaft position feedback. This electromechanical design for feedback control accomplishes its purpose and has no need for an external source for powering up. This device is equipped with a shaft key. That ensures shaft's tightened and secured connection. Part number MPL-B520K-SJ72AA has DIN-type connectors that are fitted at a right angle. These are rotatable connectors and can change their angle up to 180 degrees.

Technical Specifications

MPN MPL-B520K-SJ72AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 400V
Frame Size 165 mm
Magnetic Stack Length 2 in
Rated Speed 4000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B520K-SJ72AA?

Answer: Yes. We offer repairs for the MPL-B520K-SJ72AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B520K-SJ72AA?

Answer: If you buy the MPL-B520K-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B520K-SJ72AA online?

Answer: Yes. Automation Stop sells the MPL-B520K-SJ72AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B520K-SJ72AA?

Answer: The MPL-B520K-SJ72AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B520K-SJ72AA?

Answer: The MPL-B520K-SJ72AA is part of the MPL Servo Motors series.


Question: Does the MPL-B520K-SJ72AA have a Brake?

Answer: No brake.


Question: What Connectors does the Allen Bradley/Rockwell Automation MPL-B520K-SJ72AA have?

Answer: The Connectors of the MPL-B520K-SJ72AA is Circular DIN, right angle, 180 degree rotatable.


Question: What Factory Designated Options are included with the MPL-B520K-SJ72AA?

Answer: The Allen Bradley Automation MPL-B520K-SJ72AA includes Standard for its Factory Designated Options.


Question: What Feeback does the MPL-B520K-SJ72AA have?

Answer: The MPL-B520K-SJ72AA has a Single-turn high-resolution encoder Feeback.


Question: What Frame Size does the MPL-B520K-SJ72AA have?

Answer: The Frame Size of the Allen Bradley-Rockwell Automation MPL-B520K-SJ72AA is 165 mm.


Question: What Magnetic Stack Length does the Rockwell Automation MPL-B520K-SJ72AA have?

Answer: The Magnetic Stack Length of the Rockwell Automation MPL-B520K-SJ72AA is 2 in.


Question: What Mounting Flange does the MPL-B520K-SJ72AA have?

Answer: The Allen Bradley-Rockwell Automation MPL-B520K-SJ72AA has a IEC Metric Mounting Flange.


Question: What Rated Speed does the MPL-B520K-SJ72AA have?

Answer: The Rated Speed of the MPL-B520K-SJ72AA is 4000 revolutions per minute (RPM).


Question: What Shaft Key/Seal does the MPL-B520K-SJ72AA have?

Answer: The MPL-B520K-SJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What is the Voltage Class of the MPL-B520K-SJ72AA?

Answer: The Voltage Class of the Allen Bradley-Rockwell Automation MPL-B520K-SJ72AA is 400V.


Series information for MPL-B520K-SJ72AA

For additional information about MPL-B520K-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B520K-SJ72AA.

Revision Part # Also Known As Availability
MPL-B520K-SJ72AA/A MPL-B520K-SJ72AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B520K-5J72AA
  • MPL-B52OK-SJ72AA
  • MPL-B52OK-5J72AA
  • MPL-BS20K-SJ72AA
  • MPL-BS20K-5J72AA
  • MPL-BS2OK-SJ72AA
  • MPL-BS2OK-5J72AA
  • MPL-8520K-SJ72AA
  • MPL-8520K-5J72AA
  • MPL-852OK-SJ72AA
  • MPL-852OK-5J72AA
  • MPL-8S20K-SJ72AA
  • MPL-8S20K-5J72AA
  • MPL-8S2OK-SJ72AA
  • MPL-8S2OK-5J72AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP