GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

MPL-B4530K-MJ74AA

Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-B4530K-MJ74AA
Series: MPL Servo Motors

Description:

The MPL-B4530K-MJ74AA is a Kinetix low inertia servo motor with a multi-turn encoder of high-resolution feedback by Allen-Bradley. It comes with a 400-volt armature winding. Four thousand (4000) revolutions per minute (rpm) is the rated rotary speed. This servo motor has a frame size of 130 millimeters (mm), a magnetic stack length of 76.2 mm, permanent magnets, a 24-volt holding brake, type FF IEC mounting flange, and circular DIN connectors.


Key Features:

  • has circular din, right angle, 180 degrees rotatable connector
  • has iec metric mounting flange
  • features 400 volts ac for voltage class

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Allen-Bradley's MPL-B4530K-MJ74AA, a permanent magnet synchronous motor - rotary servo motor, is typically used in control systems that require high motion precision, such as the robotic hand, packaging industry, etc. It is also preferred widely in the automotive sector as it has a smart motor technology. Besides that, it has high torque to rotor inertia ratio, which is why it is commonly used in applications where motor weight is a sensitive parameter. Part number MPL-B4530K-MJ74AA features a four hundred (400)-volt alternating current (AC) class armature winding. This device utilizes permanent, rare-earth magnets to generate a strong magnetic field. For accurate positioning control, it features an encoder. This encoder is a basic unit of a feedback system.This encoder is a multi-turn type to measure more than 360 degrees of motor revolution to control position. This servo motor has mounting dimensions as per standard IEC72, a one hundred and thirty (130)-millimeter frame, and a three (3)-inch magnetic stack. It also includes DIN connectors that are fitted in a way to rotate up to 180 degrees. The MPL-B4530K-MJ74AA offers a speed of 4000 revolutions per minute (rpm) with a weight of 9.1 kilograms (kg). It also offers a twenty-four (24.0) volts holding brake that has the following specifications: it is a direct current device, has holding torque of 10.20 Newton-meter, a 0.576- to 0.704-ampere coil current, and 0.00044 kg-m² of rotor inertia. On the other hand, the motor's stall torque values are 8.25 Newton-meter when operated continuously and 20.3 Newton-meter at peak operation. 

Technical Specifications

MPN MPL-B4530K-MJ74AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Frame Size 165 mm
Magnetic Stack Length 3 in
Rated Speed 4000 rpm
Feeback Multi-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular DIN, right angle, 180 degree rotatable
Brake 24V DC brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-B4530K-MJ74AA?

Answer: Yes. We offer repairs for the MPL-B4530K-MJ74AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4530K-MJ74AA?

Answer: If you buy the MPL-B4530K-MJ74AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-B4530K-MJ74AA online?

Answer: Yes. Automation Stop sells the MPL-B4530K-MJ74AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-B4530K-MJ74AA?

Answer: The MPL-B4530K-MJ74AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-B4530K-MJ74AA?

Answer: The MPL-B4530K-MJ74AA is part of the MPL Servo Motors series.


Question: What is the Brake of the MPL-B4530K-MJ74AA?

Answer: The Allen Bradley/Rockwell Automation MPL-B4530K-MJ74AA has a Brake of 24 volts direct current (DC) brake.


Question: What is the Connectors of the MPL-B4530K-MJ74AA?

Answer: The Allen-Bradley MPL-B4530K-MJ74AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.


Question: What Factory Designated Options are included with the Allen Bradley/Rockwell Automation MPL-B4530K-MJ74AA?

Answer: The MPL-B4530K-MJ74AA includes Standard for its Factory Designated Options.


Question: What Feeback is included with the Allen Bradley/Rockwell Automation MPL-B4530K-MJ74AA?

Answer: The MPL-B4530K-MJ74AA has a Multi-turn high-resolution encoder Feeback.


Question: What is the Frame Size of the Rockwell-Automation MPL-B4530K-MJ74AA?

Answer: The Rockwell-Automation MPL-B4530K-MJ74AA has a Frame Size of 165 mm.


Question: What is the Magnetic Stack Length of the MPL-B4530K-MJ74AA?

Answer: The Magnetic Stack Length of the MPL-B4530K-MJ74AA is 3 in .


Question: What Mounting Flange is included with the Allen Bradley/Rockwell Automation MPL-B4530K-MJ74AA?

Answer: The Allen Bradley/Rockwell Automation MPL-B4530K-MJ74AA has a IEC Metric Mounting Flange.


Question: What Rated Speed does the MPL-B4530K-MJ74AA have?

Answer: The MPL-B4530K-MJ74AA has a Rated Speed of 4000 revolutions per minute (RPM).


Question: What Shaft Key/Seal does the MPL-B4530K-MJ74AA have?

Answer: The MPL-B4530K-MJ74AA has a Shaft key/no shaft seal Shaft Key/Seal.


Series information for MPL-B4530K-MJ74AA

For additional information about MPL-B4530K-MJ74AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4530K-MJ74AA.

Revision Part # Also Known As Availability
MPL-B4530K-MJ74AA/A MPL-B4530K-MJ74AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-B453OK-MJ74AA
  • MPL-B4S30K-MJ74AA
  • MPL-B4S3OK-MJ74AA
  • MPL-84530K-MJ74AA
  • MPL-8453OK-MJ74AA
  • MPL-84S30K-MJ74AA
  • MPL-84S3OK-MJ74AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP