GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4530K-MJ72AA |
Series: | MPL Servo Motors |
Description:
Part number MPL-B4530K-MJ72AA is a premium rotary servo motor with permanent magnets by Allen Bradley/Rockwell automation. This servo motor has low inertia and has circular bayonet connectors. This device has 400 volts armature windings and is capable of higher output torque. The magnet stack length of this device is 3.0 inches, and the frame size measures 130 millimeters. The rotary speed of this servo drive is 4000 revolutions per minute.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's Kinetix MPL-B4530K-MJ72AA is a servo motor that features a multi-turn encoder that delivers absolute position feedback of high-resolution within 4096 turns. This feedback is based on an electromechanical assembly and does not need electric energy to operate. This lightweight and small brushless servo motor are made to fit the high-performance motion system specifications. The MPL-B4530K-MJ72AA uses high-energy rare-earth magnets to produce a magnetic field to offer higher output torques while having low rotor inertia. That is why this motor is suitable for applications that require high torque to size ratio. It uses armature windings that are from 400 volts - class B. It has a standard IEC 72-1 mounting dimension with a frame size of 130 millimeters. It comes with a magnetic stack having a length of 76.2 millimeters (mm). It is compatible with bayonet connectors that circular in shape and facing the shaft. The operating temperature range lies between 0 to 40 degrees Celcius (32 to 104 degrees Fahrenheit). The MPL-B4530K-MJ72AA can attain a speed of 4000 rpm with 2600 watts rated output power. It weighs around 16 pounds and has a rotor inertia of 0.0036 lb•in•s². It has 73 lb-in. and 180 lb-in. of continuous and peak stall torques, respectively. If the motor load is kept under specified values, then its bearing can have a life of 20,000 hours. The maximum radial load is 293 pounds, and the maximum axial load is 45 pounds. The speed of the motor can drop to 500 rpm at these maximum loads.
MPN | MPL-B4530K-MJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 4000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4530K-MJ72AA?
Answer: Yes. We offer repairs for the MPL-B4530K-MJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4530K-MJ72AA?
Answer: If you buy the MPL-B4530K-MJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4530K-MJ72AA online?
Answer: Yes. Automation Stop sells the MPL-B4530K-MJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4530K-MJ72AA?
Answer: The MPL-B4530K-MJ72AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B4530K-MJ72AA?
Answer: The MPL-B4530K-MJ72AA is part of the MPL Servo Motors series.
Question: Does the Allen-Bradley MPL-B4530K-MJ72AA have a Brake?
Answer: No brake.
Question: What is the Connectors of the MPL-B4530K-MJ72AA?
Answer: The Connectors of the MPL-B4530K-MJ72AA is Circular DIN, right angle, 180 degree rotatable.
Question: What kind of Factory Designated Options does the MPL-B4530K-MJ72AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B4530K-MJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback is included with the MPL-B4530K-MJ72AA?
Answer: The Rockwell-Automation MPL-B4530K-MJ72AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B4530K-MJ72AA?
Answer: The Frame Size of the MPL-B4530K-MJ72AA is 165 mm.
Question: What is the Magnetic Stack Length of the MPL-B4530K-MJ72AA?
Answer: The Rockwell Automation MPL-B4530K-MJ72AA has a Magnetic Stack Length of 3 in .
Question: What Mounting Flange does the Allen Bradley Automation MPL-B4530K-MJ72AA have?
Answer: The Allen Bradley Automation MPL-B4530K-MJ72AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the Rockwell-Automation MPL-B4530K-MJ72AA?
Answer: The Rockwell-Automation MPL-B4530K-MJ72AA has a Rated Speed of 4000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the Rockwell-Automation MPL-B4530K-MJ72AA have?
Answer: The Rockwell-Automation MPL-B4530K-MJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B4530K-MJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4530K-MJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4530K-MJ72AA/A | MPL-B4530K-MJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.