GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B4530K-MJ22AA |
Series: | MPL Servo Motors |
Description:
MPL-B4530K-MJ22AA is a 4000 rpm servo motor by Allen Bradley, Rockwell Automation. It features an IEC metric design with a 130 millimeters frame and 3 inches magnetic stack for permanent magnets. It provides an option for a key for a motor shaft, 400 volts voltage requirement, and circular connectors. It features the optimized design of the motor - low inertia and high torques - and optimized feedback control; multi-turn high-resolution encoder.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen Bradley's MP-Series Low Inertia (MPL) Servo Motor, MPL-B4530K-MJ22AA, is a high-output brushless motor with novel design features that allow us to minimize motor size while providing significantly more torque. This small brushless servo motor is intended to fulfill the severe demands of highly efficient motion systems. It is an alternating current (AC) motor. This motor is designed keeping in consideration the IEC 72-1 standard; frame number 45 (130 millimeters) and type FF mounting flange.
MPL - B4530K - MJ22AA uses permanent magnets (magnetic stack of 3 inches) to keep its size minimum as well as inertia to the minimal value. It still provides the torque values (continuous 8.25 newton-meters stall torque) of relatively higher as compared to the motors of the same size. It weighs only 7.3 kilograms, whereas it can provide stall torque up to 20.3-newton meters (peak). It can attain a speed of 4000 rpm with rotor inertia of only 0.00040 kilogram-meters squared.
This servo motor, MPL - B4530K - MJ22AA, has 2.6kilowatts of output power rating and armature windings that belong to the 400 volts class. This rotary motor features a smart motor technology and feedback system. It has a multi-turn encoder to control the position and speed of the motor with high precision in its feedback system. These signals from the encoder are fed into motor controllers to complete the loop. For external connections, this motor has bayonet connectors facing towards the shaft. The plus feature is the shaft key to ensure a definite connection.
MPN | MPL-B4530K-MJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 4000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B4530K-MJ22AA?
Answer: Yes. We offer repairs for the MPL-B4530K-MJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B4530K-MJ22AA?
Answer: If you buy the MPL-B4530K-MJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B4530K-MJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B4530K-MJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B4530K-MJ22AA?
Answer: The MPL-B4530K-MJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B4530K-MJ22AA?
Answer: The MPL-B4530K-MJ22AA is part of the MPL Servo Motors series.
Question: Does the MPL-B4530K-MJ22AA have a Brake?
Answer: No brake.
Question: What kind of Connectors does the Allen Bradley MPL-B4530K-MJ22AA have?
Answer: The MPL-B4530K-MJ22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the Rockwell-Automation MPL-B4530K-MJ22AA have?
Answer: The Rockwell-Automation MPL-B4530K-MJ22AA has Factory Designated Options Standard.
Question: What Feeback does the MPL-B4530K-MJ22AA have?
Answer: The Allen-Bradley MPL-B4530K-MJ22AA has a Multi-turn high-resolution encoder Feeback.
Question: What Frame Size does the MPL-B4530K-MJ22AA have?
Answer: The Frame Size of the MPL-B4530K-MJ22AA is 165 mm.
Question: What is the Magnetic Stack Length of the MPL-B4530K-MJ22AA?
Answer: The MPL-B4530K-MJ22AA has a Magnetic Stack Length of 3 in .
Question: What Mounting Flange does the Rockwell-Automation MPL-B4530K-MJ22AA have?
Answer: The MPL-B4530K-MJ22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-B4530K-MJ22AA have?
Answer: The Rated Speed of the Rockwell Automation MPL-B4530K-MJ22AA is 4000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B4530K-MJ22AA have?
Answer: The Allen Bradley/Rockwell Automation MPL-B4530K-MJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-B4530K-MJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B4530K-MJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B4530K-MJ22AA/A | MPL-B4530K-MJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.