GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B320P-SJ22AA |
Series: | MPL Servo Motors |
Description:
Allen Bradley's MPL-B320P-SJ22AA is an AC servo motor. It is a rotary and low inertia motor and has a permanent magnet. It has a nominal rated input voltage of 400 V, frame size of 100 mm (millimeters), magnetic stack length of 50.8 mm, and rated speed of 5000 rpm. It features a single turn encoder for the feedback, a seal-less shaft with an optional key option, and a circular bayonet connector.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
An alternating current servo motor, MPL-B320P-SJ22AA, is manufactured by Allen Bradley. It is a permanent magnet type motor due to which it has low inertia, compact design, and high output performance. It requires a voltage of 400 volts for input (typically armature winding of 460 volts) and provides 1.5 kilowatts of output. It has a rated (maximum) speed of 5000 rpm (revolutions per minute), rotor inertia of 0.000078 in kilogram-meters squared, the continuous and peak stall torque of 3.05 and 7.91 Nm (newton meters), respectively. It has a continuous and peak stall current of 4.5 and 14.0 amperes, respectively.
It features a single turn and high-resolution encoder for absolute feedback. It has a circular bayonet connector that faces the shaft. The shaft has no seal, but, it offers a key for a safe and rigid connection. It has 100 mm of Frame with standard IEC 72-1 dimension and a 2-inch long magnetic stack. This motor weighs around 3.7 kilograms. It can bear a radial shaft load of 40 kilograms (kg) at 5000rpm, 45 kg at 3500rpm, 55kg at 2000rpm, 69kg at 1000rpm, and 87kg at 500rpm. It can bear an axial load force of 13 kg at 5000rpm, 15 kg at 3500rpm, 19kg at 2000rpm, 25 kg at 1000 rpm, and 24 kg at 500rpm.
It has an environmental rating of IP50. It is compatible with following Kinetix drives: 5500, 5700, 6200 / 6500, 6000, 300 / 350, 2000 and 7000. It features smart motor technology to facilitate connectivity with the drives mentioned prior.
MPN | MPL-B320P-SJ22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 100 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 5000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B320P-SJ22AA?
Answer: Yes. We offer repairs for the MPL-B320P-SJ22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B320P-SJ22AA?
Answer: If you buy the MPL-B320P-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B320P-SJ22AA online?
Answer: Yes. Automation Stop sells the MPL-B320P-SJ22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B320P-SJ22AA?
Answer: The MPL-B320P-SJ22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B320P-SJ22AA?
Answer: The MPL-B320P-SJ22AA is part of the MPL Servo Motors series.
Question: Does the Allen Bradley-Rockwell Automation MPL-B320P-SJ22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the MPL-B320P-SJ22AA?
Answer: The Allen Bradley Automation MPL-B320P-SJ22AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the MPL-B320P-SJ22AA?
Answer: The MPL-B320P-SJ22AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-B320P-SJ22AA have?
Answer: The MPL-B320P-SJ22AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B320P-SJ22AA?
Answer: The Frame Size of the MPL-B320P-SJ22AA is 100 mm.
Question: What Magnetic Stack Length does the MPL-B320P-SJ22AA have?
Answer: The Allen-Bradley MPL-B320P-SJ22AA has a Magnetic Stack Length of 2 in.
Question: What Mounting Flange is included with the Rockwell Automation MPL-B320P-SJ22AA?
Answer: The Rockwell Automation MPL-B320P-SJ22AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-B320P-SJ22AA have?
Answer: The Rockwell-Automation MPL-B320P-SJ22AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the Allen Bradley Automation MPL-B320P-SJ22AA?
Answer: The Allen Bradley Automation MPL-B320P-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the MPL-B320P-SJ22AA?
Answer: The Voltage Class of the Allen Bradley/Rockwell Automation MPL-B320P-SJ22AA is 400V.
For additional information about MPL-B320P-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B320P-SJ22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B320P-SJ22AA/A | MPL-B320P-SJ22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.