GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B320P-MK22AA |
Series: | MPL Servo Motors |
Description:
This Allen-Bradley servo motor has a rated speed of 5000 rpm. This brushless motor has low rotor inertia and is fitted with a circular bayonet cable connections that face the shaft. With a maximum resolution of 1024 sin/cos, this servo motor is a 400-volt rated module with a magnetic stack length of approximately 2 inches and a multi-turn high-resolution encoder unit. This synchronous servo from the MPL Series has a 100-millimeter frame. This motor is not equipped with brakes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number MPL-B320P-MK22AA from Allen-Bradley is an MP series AC servo motor. It is one of Allen Bradley’s low-inertia servo motors, with a higher-level torque to size ratio, smarter motor technologies, and a Hiperface encoder protocol system. These MP series motors, that are offered in 200 volts AC or 400 volts AC, include an IEC 72-1 mounting size, 180-degree DIN connections, and multi-turn and single-turn encoder feedback, just to name a few features.
In order for the MPL-B320P-MK22AA servo motor to run at 5000 revolutions per minute (rpm), it must be supplied with an input voltage of 400 volts alternating current (AC). The standard for stall torques that are constant and peak are twenty-seven (27) pounds per inch (lb-in) and seventy (70) pounds per inch (lb-in), respectively. Stall currents are 4.5 amperes when operating continuously and 14 amperes at peak operation. The motor is rated at 1.5 kilowatts of output power. The inertia of the rotor is 0.000069 lb-in-s². This device weighs around 8 pounds. The MPL-B320P-MK22AA servo motor's magnet stack length is 50.8 millimeters (2 inches). The MPL-B320P-MK22AA is fitted with a 1024 sin/cos precise multi-turn encoder that operates according to the preface standard. This servo motor does not include a motor brake or shaft seal. There is a 10-pound motor brake that is optional for this device. This motor brake has a holding torque of 37 lb-in and a coil current of 0.45 to 0.55 amperes. A shaft seal is also available as an option, which when installed on the servo motor results in an increased IP 66 certification for the motor's shaft.
MPN | MPL-B320P-MK22AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 100 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 5000 rpm |
Feeback | Multi-turn high-resolution encoder |
Shaft Key/Seal | No shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B320P-MK22AA?
Answer: Yes. We offer repairs for the MPL-B320P-MK22AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B320P-MK22AA?
Answer: If you buy the MPL-B320P-MK22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B320P-MK22AA online?
Answer: Yes. Automation Stop sells the MPL-B320P-MK22AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B320P-MK22AA?
Answer: The MPL-B320P-MK22AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B320P-MK22AA?
Answer: The MPL-B320P-MK22AA is part of the MPL Servo Motors series.
Question: Does the Allen Bradley Automation MPL-B320P-MK22AA have a Brake?
Answer: No brake.
Question: What Connectors are included with the MPL-B320P-MK22AA?
Answer: The Allen Bradley Automation MPL-B320P-MK22AA has Connectors Circular bayonet, facing shaft.
Question: What kind of Factory Designated Options does the Allen Bradley/Rockwell Automation MPL-B320P-MK22AA have?
Answer: The MPL-B320P-MK22AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-B320P-MK22AA have?
Answer: The Allen Bradley Automation MPL-B320P-MK22AA has a Multi-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the MPL-B320P-MK22AA?
Answer: The MPL-B320P-MK22AA has a Frame Size of 100 mm.
Question: What Magnetic Stack Length does the MPL-B320P-MK22AA have?
Answer: The Magnetic Stack Length of the MPL-B320P-MK22AA is 2 in.
Question: What Mounting Flange does the Allen Bradley Automation MPL-B320P-MK22AA have?
Answer: The MPL-B320P-MK22AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B320P-MK22AA?
Answer: The MPL-B320P-MK22AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: Does the MPL-B320P-MK22AA have a Shaft Key/Seal?
Answer: No shaft key/no shaft seal.
Question: What Voltage Class does the Allen Bradley-Rockwell Automation MPL-B320P-MK22AA have?
Answer: The MPL-B320P-MK22AA has a Voltage Class of 400V.
For additional information about MPL-B320P-MK22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B320P-MK22AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B320P-MK22AA/A | MPL-B320P-MK22AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.