GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B220T-HJ42AA |
Series: | MPL Servo Motors |
Description:
The Allen-Bradley produced MPL-B220T-HJ42AA has a maximum speed of 6000 RPM. In addition, it has a hall incremental encoder in the motor for improved performance. Additionally, it requires 400 volts to power, it has a magnetic stack length of 2 inches, and it offers a shaft key to facilitate connection to this motor. Brakes are not included with this MPL type servo motor because it is not equipped with them. furthermore, the frame size of this magnetic field servo motor is 75 millimeters long.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley produced MPL-B220T-HJ42AA servo motor is classified as a low-inertia servo motor with improved permanent magnet technology. It was created in response to the needs of the aerospace and defense sectors. It was also designed for efficiency across a variety of applications while requiring as little inertia as feasible. Allen-Bradley uses a permanent magnet servo motor with a steady speed. This is demonstrated by the Allen-Bradley MPL-B220T-HJ42AA. Additionally, the MPL-B220T-HJ42AA servo motor does not include brakes. The shaft of this Allen-Bradley device does not feature a shaft seal. However, this unit does have a shaft key.
There is an encoder on the MPL-B220T-HJ42AA servo motor that provides information. Simultaneously, the encoder can process a maximum of two thousand (2000) lines of feedback. It is available in two (2) sizes and has a top speed of six thosuand (6000) rpm, or revolutions per minute. This servo motor operates at a voltage of four hundred (400) volts. It also includes an IEC metric mounting flange and a magnet stack length that measures two (2) inches.
To connect this servo motor to other devices, it has three (3) simple-to-use connectors. To prevent moisture from getting into the machine and its connections, drip loops must be installed on all wires connecting to the servo motor. To ensure that the MPL-B220T-HJ42AA servo motor performs optimally for the longest possible period of time, it must be maintained in a dry area and away from EMI, or electromagnetic interference. Servo motor failure can be caused by the different factors.
MPN | MPL-B220T-HJ42AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 400V |
Frame Size | 75 mm |
Magnetic Stack Length | 2 in |
Rated Speed | 6000 rpm |
Feeback | 2000 line encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-B220T-HJ42AA?
Answer: Yes. We offer repairs for the MPL-B220T-HJ42AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B220T-HJ42AA?
Answer: If you buy the MPL-B220T-HJ42AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B220T-HJ42AA online?
Answer: Yes. Automation Stop sells the MPL-B220T-HJ42AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B220T-HJ42AA?
Answer: The MPL-B220T-HJ42AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B220T-HJ42AA?
Answer: The MPL-B220T-HJ42AA is part of the MPL Servo Motors series.
Question: Does the Allen Bradley-Rockwell Automation MPL-B220T-HJ42AA have a Brake?
Answer: No brake.
Question: What kind of Factory Designated Options does the Allen Bradley-Rockwell Automation MPL-B220T-HJ42AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B220T-HJ42AA has Factory Designated Options Standard.
Question: What Feeback does the MPL-B220T-HJ42AA have?
Answer: The Allen Bradley-Rockwell Automation MPL-B220T-HJ42AA has a Feeback of 2000 line encoder.
Question: What is the Frame Size of the MPL-B220T-HJ42AA?
Answer: The MPL-B220T-HJ42AA has a Frame Size of 75 mm .
Question: What is the Magnetic Stack Length of the MPL-B220T-HJ42AA?
Answer: The MPL-B220T-HJ42AA has a Magnetic Stack Length of 2 in.
Question: What Mounting Flange is included with the MPL-B220T-HJ42AA?
Answer: The Allen-Bradley MPL-B220T-HJ42AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-B220T-HJ42AA?
Answer: The Allen-Bradley MPL-B220T-HJ42AA has a Rated Speed of 6000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B220T-HJ42AA have?
Answer: The Rockwell-Automation MPL-B220T-HJ42AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the Allen Bradley/Rockwell Automation MPL-B220T-HJ42AA?
Answer: The Voltage Class of the MPL-B220T-HJ42AA is 400V.
For additional information about MPL-B220T-HJ42AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B220T-HJ42AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B220T-HJ42AA/A | MPL-B220T-HJ42AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.