GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-B1530U-VJ42AA |
Series: | MPL Servo Motors |
Description:
The Allen-Bradley MPL-B1530U-VJ42AA is a Low-Inertia Servo Motor that offers an efficient solution to reduce the motor size and deliver a high continuous motor power of 0.39 Kilowatts. This servomotor offers a high-speed rate of 7000 revolutions per minute at 400 Volts AC with a frame size of 63 millimeters (2.48 inches). This motor controller operates at a temperature range of zero (0) to 40 degrees Celsius (32 to 104 degrees Fahrenheit) for industrial applications and weighs approximately 1.6 Kilograms (3.5 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley MPL-B1530U-VJ42AA is a Low-Inertia Servo Motor that offers an efficient solution to reduce the motor size and deliver a high continuous motor power of 0.39 Kilowatts. The controller has a magnet stack length of 76.2 millimeters (3 inches). This servomotor offers a high-speed rate of 7000 revolutions per minute at 400 Volts AC with a frame size of 63 millimeters (2.48 inches). This AC servo motor controller supports Kinetix 6000, 6200, 6500, 300, and Kinetix 350 servo drive series for high-performance motion control systems. The servomotor offers an enhanced winding insulation material to improve heat transfer and thermal management. The MPL-B1530U-VJ42AA produces torque efficiently over a large speed range and includes very high energy rare-earth Allen-Bradley magnets to rapidly accelerate the motor.
The MPL-B1530U-VJ42AA includes a high-resolution multi-turn encoder that can be employed as a part of the Kinetix safe-off feature. This device communicates with the motor using a protocol that considers the servo as a master and the motor as a slave device. The controller has a small package without any electrical brake and shaft seal. The servo motor has three (3) connectors and offers a motor continuous stall torque of 0.9-newton meters. This servomotor offers field-reversible motor connectors. The MPL-B1530U-VJ42AA is designed to meet IP66 enclosure environmental rating and standard IEC 72-1 installing dimensions. The device can operate at a temperature range of zero (0) to 40 degrees Celsius (32 to 104 degrees Fahrenheit) for industrial applications and weighs approximately 1.6 Kilograms (3.5 pounds) while shipping.
MPN | MPL-B1530U-VJ42AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Shaft Key/Seal | Shaft key/no shaft seal |
Brand | Allen-Bradley / Rockwell Automation |
Series | MP |
Part Number | MPL-B1530U-VJ42AA |
Description | Low-inertia servo motor |
Voltage Rating | 400 Volts |
Number of Phases | 3 |
Frame Size | 63 millimeters |
Rated Speed | 7000 rpm |
Magnetic Stack Length | 76.2 millimeters (3.0 inches) |
Feedback | Multi-turn, 128 sin/cos, absolute encoder (Hiperface protocol) |
Enclosure/Shaft Key/Shaft Seal | Shaft key/No shaft seal |
Brake | No brake |
Connectors | 3 connectors |
Mounting Flange | IEC metric |
Factory Designated Options | Standard |
Motor Rated Output | 0.39 kW |
Continuous Stall Torque N-m (lb-in.) | 0.90 (8.0) |
Operating Temperature Range | 0…+40 °C (32…104 °F) |
Weight | 1.6 Kilograms (3.4 pounds) |
Question: Does Automation Stop offer repairs on the MPL-B1530U-VJ42AA?
Answer: Yes. We offer repairs for the MPL-B1530U-VJ42AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-B1530U-VJ42AA?
Answer: If you buy the MPL-B1530U-VJ42AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-B1530U-VJ42AA online?
Answer: Yes. Automation Stop sells the MPL-B1530U-VJ42AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA is part of the MPL Servo Motors series.
Question: Does the Allen Bradley Automation MPL-B1530U-VJ42AA have a Brake?
Answer: No brake.
Question: What Brand is included with the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA has a AB / Rockwell Automation Brand.
Question: What is the Connectors of the Allen Bradley-Rockwell Automation MPL-B1530U-VJ42AA?
Answer: The Allen Bradley-Rockwell Automation MPL-B1530U-VJ42AA has a Connectors of 3 connectors.
Question: What is the Continuous Stall Torque N-m (lb-in.) of the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA has a Continuous Stall Torque N-m (lb-in.) of 0.90 (8.0).
Question: What Description is included with the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA has a Low-inertia servo motor Description.
Question: Does the Allen Bradley-Rockwell Automation MPL-B1530U-VJ42AA have a Enclosure/Shaft Key/Shaft Seal?
Answer: Shaft key/No shaft seal.
Question: What Factory Designated Options are included with the Allen Bradley Automation MPL-B1530U-VJ42AA?
Answer: The Allen Bradley Automation MPL-B1530U-VJ42AA has Factory Designated Options Standard.
Question: What is the Feedback of the MPL-B1530U-VJ42AA?
Answer: The Feedback of the MPL-B1530U-VJ42AA is Multi-turn, 128 sin/cos, absolute encoder (Hiperface protocol).
Question: What is the Frame Size of the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA has a Frame Size of 63 millimeters.
Question: What Magnetic Stack Length does the Allen Bradley Automation MPL-B1530U-VJ42AA have?
Answer: The MPL-B1530U-VJ42AA has a Magnetic Stack Length of 76.2 millimeters (3.0 inch).
Question: What Motor Rated Output does the Allen Bradley MPL-B1530U-VJ42AA have?
Answer: The Motor Rated Output of the Allen Bradley MPL-B1530U-VJ42AA is 0.39 kW.
Question: What Mounting Flange does the Allen Bradley/Rockwell Automation MPL-B1530U-VJ42AA have?
Answer: The MPL-B1530U-VJ42AA has a IEC metric Mounting Flange.
Question: What Number of Phases does the Allen Bradley-Rockwell Automation MPL-B1530U-VJ42AA have?
Answer: The Number of Phases of the MPL-B1530U-VJ42AA is 3.
Question: What is the Operating Temperature Range of the MPL-B1530U-VJ42AA?
Answer: The Operating Temperature Range of the MPL-B1530U-VJ42AA is 0…+40 °C (32…104 °F) .
Question: What is the unit Number of the MPL-B1530U-VJ42AA?
Answer: The Rockwell Automation MPL-B1530U-VJ42AA has a part Number of MPL-B1530U-VJ42AA.
Question: What is the Rated Speed of the MPL-B1530U-VJ42AA?
Answer: The Rockwell Automation MPL-B1530U-VJ42AA has a Rated Speed of 7000 revolutions per minute (RPM).
Question: What Shaft Key/Seal does the MPL-B1530U-VJ42AA have?
Answer: The MPL-B1530U-VJ42AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Rating of the MPL-B1530U-VJ42AA?
Answer: The MPL-B1530U-VJ42AA has a Voltage Rating of 400 Volts.
Question: What is the Weight of the Allen Bradley-Rockwell Automation MPL-B1530U-VJ42AA?
Answer: The Weight of the Allen Bradley-Rockwell Automation MPL-B1530U-VJ42AA is 1.6 Kilograms (3.4 pounds).
For additional information about MPL-B1530U-VJ42AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-B1530U-VJ42AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-B1530U-VJ42AA/A | MPL-B1530U-VJ42AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.