GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A560F-SJ24AA |
Series: | MPL |
Description:
Part number MPL-A560F-SJ24AA is a low inertia servo motor that was designed and produced by Allen Bradley. This servo motor belongs to the MP-series of motors. This servo motor is classified as a 200-volt motor with a frame size of 165 millimeters. It has a magnetic stack length of 6 inches. The speed rating of this servo motor is 3000 revolutions per minute (rpm). It has a single-turn high-resolution encoder.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley MPL-A560F-SJ24AA comes with a single-turn high-resolution encoder. The rated speed on this low-inertia servo motor is 3750 rpm. It comes with all the essential features for a high-performance motion system. It is a type of compact brushless servo motor. Each cable on this servo motor must be paired with a drip loop. This helps with carrying the liquid out of the motor. To form a drip loop, the cable must be placed underneath the motor. This motor must be placed inside a shield that protects the motor, shaft seals, and the junctions from external corrosive elements.
The Allen Bradley MPL-A560F-SJ24AA needs to be used with shaft seals. For proper operation, users must replace the shaft seals every 3 months. However, users should immediately order a replacement unit if they observe any wear and tear on the motor. The embedded brakes of this motor will only be triggered when current is applied to the brake coil. To disengage the brakes, users need to use a separate power source. To reduce the effects of EMI, users should properly ground the shield. The dimension for the shaft on this servo drive is 8 inches x 7 inches x 40 inches. The operating temperature range of this servo motor is 0 to 40 degrees Celsius, or the equivalent range of 32 to 104 degrees Fahrenheit. Additionally, when storing this motor, the temperature should range from -30 to 70 degrees Celsius, or -22 to 158 degrees Fahrenheit. The relative humidity when storing this device should be 5% to 95% and have no condensation.
MPN | MPL-A560F-SJ24AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 165 mm |
Magnetic Stack Length | 6 in |
Rated Speed | 3000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A560F-SJ24AA?
Answer: Yes. We offer repairs for the MPL-A560F-SJ24AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A560F-SJ24AA?
Answer: If you buy the MPL-A560F-SJ24AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A560F-SJ24AA online?
Answer: Yes. Automation Stop sells the MPL-A560F-SJ24AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A560F-SJ24AA?
Answer: The MPL-A560F-SJ24AA is made by Allen Bradley - Motors.
Question: What Brake does the MPL-A560F-SJ24AA have?
Answer: The Brake of the MPL-A560F-SJ24AA is 24 volts DC (direct current) brake.
Question: What Connectors are included with the MPL-A560F-SJ24AA?
Answer: The Allen Bradley-Rockwell Automation MPL-A560F-SJ24AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the Rockwell-Automation MPL-A560F-SJ24AA?
Answer: The Rockwell-Automation MPL-A560F-SJ24AA has Factory Designated Options Standard.
Question: What Feeback is included with the Allen Bradley MPL-A560F-SJ24AA?
Answer: The MPL-A560F-SJ24AA has a Single-turn high-resolution encoder Feeback.
Question: What is the Frame Size of the Rockwell Automation MPL-A560F-SJ24AA?
Answer: The Rockwell Automation MPL-A560F-SJ24AA has a Frame Size of 165 mm.
Question: What Magnetic Stack Length does the MPL-A560F-SJ24AA have?
Answer: The Allen-Bradley MPL-A560F-SJ24AA has a Magnetic Stack Length of 6 in.
Question: What Mounting Flange does the MPL-A560F-SJ24AA have?
Answer: The MPL-A560F-SJ24AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the Rockwell Automation MPL-A560F-SJ24AA have?
Answer: The Rockwell Automation MPL-A560F-SJ24AA has a Rated Speed of 3000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the Allen Bradley Automation MPL-A560F-SJ24AA?
Answer: The MPL-A560F-SJ24AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What is the Voltage Class of the MPL-A560F-SJ24AA?
Answer: The Voltage Class of the MPL-A560F-SJ24AA is 200V.
For additional information about MPL-A560F-SJ24AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A560F-SJ24AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A560F-SJ24AA/A | MPL-A560F-SJ24AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.