GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A4530K-HJ24AA |
Series: | MPL Servo Motors |
Description:
The Allen Bradley MPL-A4530K-HJ24AA is an MP series, low-inertia, brushless servo motor with 4000 revolutions per minute. The 200 VAC rated voltage motor has a peak torque rating of 180 pounds/inch at 2.5 kW output. It has a frame size of 130 mm and a built-in keyed shaft without a seal. It is equipped with a built-in brake with a 2000 lines/revolution encoder feedback, a rare earth magnet rotor, and a 24 V DC spring-set holding brake.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-A4530K-HJ24AA by Allen-Bradley is an MP series, low inertia, brushless servo motor with a 130 mm frame and a feedback device. It is designed to fulfill the stringent requirements of high-performance motion systems. The motor is equipped with a rare earth magnet rotor, which allows it to have quick acceleration giving it a unique advantage over conventional motors. It has a rated motor speed of 4000 rpm, rated voltage of 200 VAC and rated peak torque and stall torque 20.3 Nm (180 lb-in) and 8.13 Nm (72 lb-in) respectively at 2.5 kW rated output. Its continuous stall current rating and peak stall current ratings are 19.5 and 62.0 Amps (0-peak) respectively. The motor has the additional feature of an onboard motor memory that can retain its speed profile and transfer it to the system upon startup leading to a considerabe reduction in commissioning time. The MPL-A4530K-HJ24AA servo motor is commonly compatible and used with the Allen-Bradley Kinetix 6000, /6200/6500/300/350 servo drive families.
The MPL-A4530K-HJ24AA servo motor is designed with a 2000-line incremental feedback encoder which enables precise and reliable speed control. It is also fitted with a 24 V DC spring-set holding brake whose function is to hold the servo motor in case it stalls. The motor has improved winding insulation which allows better heat transfer and improves motor performance. The 180° rotatable motor has a standard magnet stack length of 3 inches and a fixed circular type DIN connector. It is packaged in an aluminum (Al) metal enclosure with an environmental rating of IP 51, and a carbon steel key shaft. The motor has an operational temperature limit of 0 to 40 °C, and a relative humidity limit of 5 to 95% non-condensing. It has a mounting weight of approximately 9.8 kg (including brake), and is CE, UL, and CSA certified.
MPN | MPL-A4530K-HJ24AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Frame Size | 165 mm |
Magnetic Stack Length | 3 in |
Rated Speed | 4000 rpm |
Feeback | 2000 line encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular bayonet, facing shaft |
Brake | 24V DC brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A4530K-HJ24AA?
Answer: Yes. We offer repairs for the MPL-A4530K-HJ24AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A4530K-HJ24AA?
Answer: If you buy the MPL-A4530K-HJ24AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A4530K-HJ24AA online?
Answer: Yes. Automation Stop sells the MPL-A4530K-HJ24AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A4530K-HJ24AA?
Answer: The MPL-A4530K-HJ24AA is made by Allen Bradley - Motors.
Question: What type of product is the MPL-A4530K-HJ24AA?
Answer: The MPL-A4530K-HJ24AA is part of the MPL Servo Motors series.
Question: What Brake does the Allen Bradley MPL-A4530K-HJ24AA have?
Answer: The MPL-A4530K-HJ24AA has a Brake of 24 volts direct current brake.
Question: What Connectors are included with the Allen Bradley/Rockwell Automation MPL-A4530K-HJ24AA?
Answer: The MPL-A4530K-HJ24AA has Connectors Circular bayonet, facing shaft.
Question: What Factory Designated Options are included with the MPL-A4530K-HJ24AA?
Answer: The Allen Bradley Automation MPL-A4530K-HJ24AA has Factory Designated Options Standard.
Question: What is the Feeback of the MPL-A4530K-HJ24AA?
Answer: The MPL-A4530K-HJ24AA has a Feeback of 2000 line encoder.
Question: What Frame Size does the Allen Bradley Automation MPL-A4530K-HJ24AA have?
Answer: The MPL-A4530K-HJ24AA has a Frame Size of 165 mm.
Question: What is the Magnetic Stack Length of the MPL-A4530K-HJ24AA?
Answer: The Allen Bradley/Rockwell Automation MPL-A4530K-HJ24AA has a Magnetic Stack Length of 3 in .
Question: What Mounting Flange is included with the Rockwell-Automation MPL-A4530K-HJ24AA?
Answer: The Rockwell-Automation MPL-A4530K-HJ24AA has a IEC Metric Mounting Flange.
Question: What Rated Speed does the MPL-A4530K-HJ24AA have?
Answer: The Rated Speed of the MPL-A4530K-HJ24AA is 4000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the MPL-A4530K-HJ24AA?
Answer: The Rockwell Automation MPL-A4530K-HJ24AA has a Shaft key/no shaft seal Shaft Key/Seal.
For additional information about MPL-A4530K-HJ24AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A4530K-HJ24AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A4530K-HJ24AA/A | MPL-A4530K-HJ24AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.