GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley MPL-A430P-SJ22AA

✓ In Stock

MPL-A430P-SJ22AA Image 1 thumbnail
MPL-A430P-SJ22AA Image 2 thumbnail
MPL-A430P-SJ22AA Image 3 thumbnail
MPL-A430P-SJ22AA Image 4 thumbnail
Manufacturer: Allen Bradley - Motors
Product Type: Automation Product
Part Number: MPL-A430P-SJ22AA
Series: MPL Servo Motors

Description:

This MPL-A430P-SJ22AA which was manufactured by Allen-Bradley / Rockwell Automation, is a servo motor that has a rated speed of 5000 rpm and low inertia of 0.00038 kg m�. This servo motor belongs to the 200-volt AC voltage class. It has an IEC metric standard frame size of 115 millimeters, a magnetic stack of 76.2 mm, and an output power of 2.2 kW. This device has a continuous torque of 5.99 Nm at zero speed and a maximum torque of 19.8 Nm is observed in a short time.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,284.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$1,828.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a MPL-A430P-SJ22AA? We can help!

Request a Quote

Key Features:

  • offers iec metric mounting flange
  • operates at 200 volts for voltage class

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Part number MPL-A430P-SJ22AA belongs to the series of low inertia servo motors by Allen-Bradley. These servo motors are brushless and give a high output while having a reduced size and high torque. This servo motor follows an IEC metric and has a frame size of four (4), or one hundred and fifteen (115) millimeters, with a maximum speed rating of 5000 rpm (revolutions per minute). The output is rated at 2.2 kilowatts (kW) power with low inertia of 0.00038 kg m². This motor can reach a maximum torque of 19.8 Nm (Newton meters) in a short interval of time and also a continuous torque of 5.99 Nm (Newton meters) at zero speed. This motor also belongs to the 200-volt alternating current (AC) class with a magnetic stack of 76.2 mm, or 3 inches, in length. The motor has circular bayonet connectors to connect the motor with other devices or components. This bayonet cable is right next to the shaft which is keyed for extra protection. There is an absence of a shaft seal which makes this motor an easy target when in contact with water or moisture. This motor is, however, rated with IP50 and IP66 ratings at the enclosures. This makes them dustproof, but regularly scheduled maintenance is still mandatory for the optional operation of the motor. The motor can be mounted on any surface with m7 type motor ends. The factory standard settings also include a Hiperface protocol with the feedback system and an absolute single turn 1024 sin cos encoder. 

Technical Specifications

MPN MPL-A430P-SJ22AA
Manufacturer Allen Bradley/Rockwell Automation
Series MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size
Voltage Class 200V
Frame Size 115 mm
Magnetic Stack Length 3 in
Rated Speed 5000 rpm
Feeback Single-turn high-resolution encoder
Shaft Key/Seal Shaft key/no shaft seal
Connectors Circular bayonet, facing shaft
Brake No brake
Mounting Flange IEC Metric
Factory Designated Options Standard
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the MPL-A430P-SJ22AA?

Answer: Yes. We offer repairs for the MPL-A430P-SJ22AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A430P-SJ22AA?

Answer: If you buy the MPL-A430P-SJ22AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the MPL-A430P-SJ22AA online?

Answer: Yes. Automation Stop sells the MPL-A430P-SJ22AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the MPL-A430P-SJ22AA?

Answer: The MPL-A430P-SJ22AA is made by Allen Bradley - Motors.


Question: What type of product is the MPL-A430P-SJ22AA?

Answer: The MPL-A430P-SJ22AA is part of the MPL Servo Motors series.


Question: Does the MPL-A430P-SJ22AA have a Brake?

Answer: No brake.


Question: What kind of Connectors does the Allen Bradley/Rockwell Automation MPL-A430P-SJ22AA have?

Answer: The MPL-A430P-SJ22AA has Connectors Circular bayonet, facing shaft.


Question: What kind of Factory Designated Options does the MPL-A430P-SJ22AA have?

Answer: The Allen Bradley Automation MPL-A430P-SJ22AA includes Standard for its Factory Designated Options.


Question: What Feeback does the MPL-A430P-SJ22AA have?

Answer: The Allen-Bradley MPL-A430P-SJ22AA has a Single-turn high-resolution encoder Feeback.


Question: What Frame Size does the Rockwell Automation MPL-A430P-SJ22AA have?

Answer: The Frame Size of the MPL-A430P-SJ22AA is 115 mm .


Question: What is the Magnetic Stack Length of the MPL-A430P-SJ22AA?

Answer: The Magnetic Stack Length of the Allen Bradley/Rockwell Automation MPL-A430P-SJ22AA is 3 in .


Question: What Mounting Flange is included with the Allen Bradley Automation MPL-A430P-SJ22AA?

Answer: The MPL-A430P-SJ22AA has a IEC Metric Mounting Flange.


Question: What Rated Speed does the MPL-A430P-SJ22AA have?

Answer: The Rated Speed of the Rockwell Automation MPL-A430P-SJ22AA is 5000 revolutions per minute (RPM).


Question: What Shaft Key/Seal is included with the MPL-A430P-SJ22AA?

Answer: The Allen-Bradley MPL-A430P-SJ22AA has a Shaft key/no shaft seal Shaft Key/Seal.


Question: What is the Voltage Class of the Allen Bradley/Rockwell Automation MPL-A430P-SJ22AA?

Answer: The Voltage Class of the MPL-A430P-SJ22AA is 200V.


Series information for MPL-A430P-SJ22AA

For additional information about MPL-A430P-SJ22AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A430P-SJ22AA.

Revision Part # Also Known As Availability
MPL-A430P-SJ22AA/A MPL-A430P-SJ22AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • MPL-A430P-5J22AA
  • MPL-A43OP-SJ22AA
  • MPL-A43OP-5J22AA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP