GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Automation Product |
Part Number: | MPL-A310P-SJ72AA |
Series: | MPL |
Description:
The Allen-Bradley MPL-A310P-SJ72AA is a servo motor. It is part of the MPL series of low inertia motors and comes with an absolute single turn Hiperface (Stegmann) encoder. It has a shaft key without a shaft seal and does not come with a brake. It has standard factory options. It has a rated speed of 5000 rpm and has a 200 Volt voltage class. The frame size of 100 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The MPL-A310P-SJ72AA is included in the MPL Bulletin series of high output low inertia servo motors manufactured by Allen-Bradley. It features Smart Motor Technology and innovative design to produce high torque with a small motor size. The motor is specified with a voltage class rating of 200 Volts and comes in a 100 millimeter frame size. This unit has a speed rating of 4750 rotations per minute and a maximum speed of 5000 rpm. The continuous stall torque is rated at 1.58 Newton-meters (14 pound-inches) and the peak stall torque is specified at 3.61 Newton-meters (32 pound-inches). The rated output power for this motor is 0.73 kilowatts. It has a rotor inertia of 0.000044 kilograms meter squared (0.00039 pound inches squared). The approximate weight of this motor is 2.7 kilograms (5.8 pounds). This motor provides feedback according to the Hiperface protocol with a 1021 sin/cos absolute single turn encoder. The motor has a shaft key but comes without a shaft seal. It is not equipped with an integrated brake module. The motor’s mounting flange is provided according to the IEC metric. The motor is housed in an IP66 rated enclosure and comes with standard factory designated options. The module supports operational vibrations with up to 2.5 G peaks at a frequency between 30 Hertz and 2 Kilohertz. It can withstand shocks of up to 20 G for 6 milliseconds during operation. It is rated for operation in a temperature range between 32 degrees to 104 degrees Fahrenheit (0 degrees to 40 degrees Celsius).
MPN | MPL-A310P-SJ72AA |
Manufacturer | Allen Bradley/Rockwell Automation |
Series | MP-Series Low-inertia Servo Motor with 100 mm to 165 mm Frame Size |
Voltage Class | 200V |
Frame Size | 100 mm |
Magnetic Stack Length | 1 in |
Rated Speed | 5000 rpm |
Feeback | Single-turn high-resolution encoder |
Shaft Key/Seal | Shaft key/no shaft seal |
Connectors | Circular DIN, right angle, 180 degree rotatable |
Brake | No brake |
Mounting Flange | IEC Metric |
Factory Designated Options | Standard |
Question: Does Automation Stop offer repairs on the MPL-A310P-SJ72AA?
Answer: Yes. We offer repairs for the MPL-A310P-SJ72AA and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and MPL-A310P-SJ72AA?
Answer: If you buy the MPL-A310P-SJ72AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the MPL-A310P-SJ72AA online?
Answer: Yes. Automation Stop sells the MPL-A310P-SJ72AA online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the MPL-A310P-SJ72AA?
Answer: The MPL-A310P-SJ72AA is made by Allen Bradley - Motors.
Question: Does the MPL-A310P-SJ72AA have a Brake?
Answer: No brake.
Question: What is the Connectors of the Rockwell Automation MPL-A310P-SJ72AA?
Answer: The Rockwell Automation MPL-A310P-SJ72AA has a Connectors of Circular DIN, right angle, 180 degree rotatable.
Question: What Factory Designated Options are included with the Allen Bradley-Rockwell Automation MPL-A310P-SJ72AA?
Answer: The Allen Bradley-Rockwell Automation MPL-A310P-SJ72AA includes Standard for its Factory Designated Options.
Question: What Feeback does the MPL-A310P-SJ72AA have?
Answer: The MPL-A310P-SJ72AA has a Single-turn high-resolution encoder Feeback.
Question: What Frame Size does the MPL-A310P-SJ72AA have?
Answer: The Allen Bradley MPL-A310P-SJ72AA has a Frame Size of 100 mm.
Question: What is the Magnetic Stack Length of the MPL-A310P-SJ72AA?
Answer: The MPL-A310P-SJ72AA has a Magnetic Stack Length of 1 in.
Question: What Mounting Flange does the MPL-A310P-SJ72AA have?
Answer: The Rockwell-Automation MPL-A310P-SJ72AA has a IEC Metric Mounting Flange.
Question: What is the Rated Speed of the MPL-A310P-SJ72AA?
Answer: The MPL-A310P-SJ72AA has a Rated Speed of 5000 revolutions per minute (RPM).
Question: What Shaft Key/Seal is included with the Allen Bradley MPL-A310P-SJ72AA?
Answer: The Allen Bradley MPL-A310P-SJ72AA has a Shaft key/no shaft seal Shaft Key/Seal.
Question: What Voltage Class does the Allen Bradley MPL-A310P-SJ72AA have?
Answer: The MPL-A310P-SJ72AA has a Voltage Class of 200V.
For additional information about MPL-A310P-SJ72AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding MPL-A310P-SJ72AA.
Revision Part # | Also Known As | Availability |
---|---|---|
MPL-A310P-SJ72AA/A | MPL-A310P-SJ72AA Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.