GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Motors |
Product Type: | Drive |
Part Number: | 1326AB-B530E-21 |
Series: | 1326 Motors |
UPC: | 662453177410 |
Description:
Part number 1326AB-B530E-21 by Allen Bradley is a three-phase servo motor from the Bulletin 1326 product line. Due to the presence of ferrite magnets, it can be operated at lowest levels of inertia. This servo motor has an operating voltage rated at 380 to 460 volts AC (alternating current). The frame of this device has a diameter that measures 149 millimeters. It has a rated speed of 2500 rpm at 380 volts and 3000 rpm at 460 volts.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1326AB-B530E-21 servo motor is small in size and is very reliable. This motor is compatible with the Kinetix 6000 series, Ultra 460 V drive series, and 1394 motion control systems. The drive has maximum speed of 2500 rpm and 3000 rpm at input voltages 380 volts AC and 460 volts AC, respectively. The motor frame has a diameter of 149 mm. There are three feedback options, including single turn encoder, multi turn encoder, and resolver-based feedback. The 1326AB-B530E-21 has resolver-based feedback. An IEC metric flange is also included that has a keyway. It is compatible with different axis modules of the 1326 family. AM07, AM50 and AM75 are axis modules that the motor is compatible with. This drive is very robust. It is flexible and has an aluminum enclosure. This enclosure helps in heat transfer. It is IP65 rated. The motor has an increased value of torque with reduced overall length. Its maximum rated torque is 18 Nm with 4.2-kilowatt output. The rated rotor inertia of this device is 0.009 kg-m². The ambient temperature for the 1326AB-B530E-21 is 40 °C, or the equivalent of 104 °F. The weight of 1326AB-B530E-21 is approximately 34.5 kilograms. It has an insulation class of H with a thermal time constant of 66 minutes. The electrical time constant for 1326AB-B530E-21 is 7.2 milliseconds, and the mechanical time constant is 8.2 milliseconds. The motor is built in a way that allows vertical mounting at any specified angle. This motor is flexible and easy to operate. For installation, the manual should be consulted.
Manufacturer | Allen Bradley |
Series | 460V Torque Plus Series |
Product Type | Ferrite AC Servo Motor |
Frame Series | 149 mm frame diameter (165 mm bolt center) |
Motor magnet stack length | 30mm |
Rated Speed | 460V 3000 rpm/380V 2500 rpm |
Flange and Shaft Series | IEC Metric Flange with keyway |
MPN | 1326AB-B530E-21 |
Question: Does Automation Stop offer repairs on the 1326AB-B530E-21?
Answer: Yes. We offer repairs for the 1326AB-B530E-21 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Motors and 1326AB-B530E-21?
Answer: If you buy the 1326AB-B530E-21 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1326AB-B530E-21 online?
Answer: Yes. Automation Stop sells the 1326AB-B530E-21 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1326AB-B530E-21?
Answer: The 1326AB-B530E-21 is made by Allen Bradley - Motors.
Question: What type of product is the 1326AB-B530E-21?
Answer: The 1326AB-B530E-21 is part of the 1326 Motors series.
Question: What Flange and Shaft Series are included with the Allen Bradley 1326AB-B530E-21?
Answer: The Allen Bradley 1326AB-B530E-21 includes IEC Metric Flange with keyway for its Flange and Shaft Series.
Question: What Frame Series does the Allen Bradley 1326AB-B530E-21 have?
Answer: The Allen Bradley 1326AB-B530E-21 has a Frame Series of 149 mm frame diameter (165 mm bolt center).
Question: What Motor magnet stack length does the Allen Bradley/Rockwell Automation 1326AB-B530E-21 have?
Answer: The 1326AB-B530E-21 has a Motor magnet stack length of 30mm.
Question: What Product Type is included with the Rockwell-Automation 1326AB-B530E-21?
Answer: The Rockwell-Automation 1326AB-B530E-21 has a Ferrite AC (alternating current) Servo Motor Product Type.
Question: What Rated Speed does the 1326AB-B530E-21 have?
Answer: The Rockwell-Automation 1326AB-B530E-21 has a Rated Speed of 460 volts 3000 revolutions per minute (RPM)/460 volts 2500 revolutions per minute (RPM).
For additional information about 1326AB-B530E-21 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1326AB-B530E-21.
Revision Part # | Also Known As | Availability |
---|---|---|
1326AB-B530E-21/A | 1326AB-B530E-21 Ser A, Series A, Rev A | Request a Quote |
1326AB-B530E-21/B | 1326AB-B530E-21 Ser B, Series B, Rev B | Request a Quote |
1326AB-B530E-21/C | 1326AB-B530E-21 Ser C, Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.