GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2711P-T7C4A9

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711P-T7C4A9
Series: Panelview Plus 6

Description:

Allen-Bradley's 2711P-T7C4A9 is a PanelView Plus 6 700 terminal. It has a 6.5-inch color display with a touch screen for operator input. The display has a CCFL-based backlight that produces 300 Nits of screen brightness. The display has a resolution of 640 x 480 pixels. The 2711P-T7C4A9 requires an AC input voltage of 100 to 240 volts. The terminal has a maximum power usage of 160 VA. This 700 terminal features one Ethernet (Auto-MDI/MDI-X) port, one RS-232 port, and two USB host ports.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$3,099.00

Available: 35

What is Refurbished

Your order will ship by . Need it faster?

Repair Service

$2,480.00

2-4 Weeks

What is Fast Repair

Repair Completion:
2-4 Weeks
Need it faster?

Looking for a 2711P-T7C4A9? We can help!

Request a Quote

Key Features:

  • contains 8 pounds of shipping weight

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2711P-T7C4A9 is suited for applications that require visual monitoring, controlling, and displaying data, enabling operators to immediately evaluate the state of their system. The display module, logic module, and configurable communication module make up this terminal, enabling customizable setup, deployment, and updates.The terminal requires an AC power input range of 100 to 240 VAC and a 50 to 60 Hz working frequency spectrum. The display unit has a color active-matrix TFT display (thin-film transistors) with a display (diagonal) size of 6.5 inches, a screen resolution of 640 × 480 pixels, and an interactive display area of 5.2 x 3.9 inches. It also incorporates a touch screen interface that has an actuation rating of one million presses. The logic module has an Ethernet port for controller communication, two USB host ports for attaching external devices, and a serial RS-232 port for logic controller communications, printing, and program file transfers. The terminal has 512 MB RAM and 512 MB of non-volatile memory. The module also supports external SD cards. The 2711P-T7C4A9 has reset switches, status indicators, a real-time clock (which can be continuously backed by a lithium battery for a minimum of four years), and a single PCI slot. The logic module also has a network interface for the (add-on) optional communication modules, which boosts communication protocol options to DH+/DH-485, open industrial network protocol, and Ethernet Networks..The terminal's display screen has a cold-cathode fluorescent lamp-based backlight with a guaranteed life of 50,000 hours.

Technical Specifications

MPN 2711P-T7C4A9
Manufacturer Allen Bradley / Rockwell Automation
Series PanelView 6 Plus Terminal
Input Type Touch
Display Size 6.5 in
Display Type Color
Communication Ethernet, RS-232 & (2) USB
Power AC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711P-T7C4A9?

Answer: Yes. We offer repairs for the 2711P-T7C4A9 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711P-T7C4A9?

Answer: If you buy the 2711P-T7C4A9 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711P-T7C4A9 online?

Answer: Yes. Automation Stop sells the 2711P-T7C4A9 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711P-T7C4A9?

Answer: The 2711P-T7C4A9 is made by Allen Bradley - HMI.


Question: What type of product is the 2711P-T7C4A9?

Answer: The 2711P-T7C4A9 is part of the Panelview Plus 6 series.


Question: What is the Communication of the 2711P-T7C4A9?

Answer: The Rockwell Automation 2711P-T7C4A9 has a Communication of Ethernet, RS-232 & (2) USB.


Question: What Display Size does the 2711P-T7C4A9 have?

Answer: The Display Size of the 2711P-T7C4A9 is 6.5 in.


Question: What Display Type is included with the 2711P-T7C4A9?

Answer: The 2711P-T7C4A9 has a colored Display Type.


Question: What Input Type is included with the Rockwell Automation 2711P-T7C4A9?

Answer: The Rockwell Automation 2711P-T7C4A9 has a Touch Input Type.


Question: What Power does the Allen Bradley Automation 2711P-T7C4A9 have?

Answer: The 2711P-T7C4A9 has a AC (alternating current) Power.


Series information for 2711P-T7C4A9

For additional information about 2711P-T7C4A9 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711P-T7C4A9.

Revision Part # Also Known As Availability
2711P-T7C4A9/A 2711P-T7C4A9 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 271IP-T7C4A9
  • 27I1P-T7C4A9
  • 27IIP-T7C4A9

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP