The 2711P-T12C6A1 is a PanelView Plus 1250 terminal that is devised for monitoring, observing, and controlling small manufacturing applications and programs. It has a modular construction that may be customized as per needs and demands. It includes a touch panel and a colored LCD employing thin-film transistor-based cell technology. The display measures 12.1 inches (307 millimeters) diagonally, 9.7 inches (width), and 7.2 inches (height). The touch screen has a resistive coating with analog signals, giving precise touch control with a one million press rating. The 2711P-T12C6A1 encompasses only one Ethernet port, which normally allows communication by delivering data over the cords. This port is used by this terminal for IP connections and printing. It has 2 USB host ports and each port's power rating is 1.68 amperes and 5.25 volts, short-circuited current and open-circuited voltage, respectively. It also has a single RS-232 port for DH485 (serial), direct, modem, and point-to-point interactions/ communications. This terminal also consists of a communication module that supports the DH PLUS, DH485, and remote I/O protocols in one module. The terminal has 64 MB of flash memory and 64 MB RAM. The air temperature surrounding the 2711P-T12C6A1 should be somewhere around 0 to 50 degrees Celsius for effective performance. The terminal is equipped with status indicators in green and red indicating communications failures and hardware failures, respectively. It facilitates changeover to multiple display sizes and replacement bezels. The terminal requires an AC power source with a supply range of 85 to 264 VAC at 47 to 63 hertz. The 2711P-T12C6A1 has a maximum power consumption of 160 VA.