GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2711E-K10C6

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711E-K10C6
Series: Panelview 2711E

Description:

Allen Bradley?s 2711E-K10C6 is a 1000e PanelView operator interface terminal for gathering, displaying, and sharing information efficiently. Designed with a high performance HMI functionality for large scale control applications and complex processes. This device is configured with a 26.4 mm color display using active matrix, thin film transistor (TFT) technology, keypad input, field replaceable backlight, battery backed real time clock, remote Input/Output communications functionality and designed for clip mount, NEMA type 12 (indoor use only) 4X and DH+.


Key Features:

  • comes with 2.25mb on-board flash memory
  • ships with input voltage of 180-264v ac
  • has been discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Designed and manufactured by Rockwell Automation, Allen Bradley’s 2711E-K10C6 is an enhanced graphics color display clip mount model with a keypad in the family of the PanelView 1000e operator terminals. Designed and manufactured to support PLCs, SLCs, Logix controllers, this display terminal provides high performance functionality for rather complex industrial manufacturing processes. Powered by 90 – 132 or 180 – 264 volts AC input supply, it has a typical power consumption of 45 Watts, with a maximum consumption of 70 Watts.

2711E-K10C6 is retrofitted with automatically configured on-board highway plus, remote I/O port and ControlNet interface that supports connection to several controllers, access to PLC-5C as well as unscheduled interface with ControlLogix controller data. In addition, 2711E-K10C6 has embedded graphic functions that enable object math and logic expressions for reduction of addressing and ladder logic program for PLCs and consequently data transfers for the redundant network. Process variables using trend graphics enable symbol plots with sample rates ranging from 0.25 to 84600 seconds are supported together with up to 3000 data points.

This device offers enhanced keyboard and printer support for printing alarm logs or relevant process data, and sports 115.2k and 230.4k baud rate for DH+ communications. In addition, it operates at a temperature range of 0 to 50 Degrees Celsius, a 95% humidity rating at 50 Degrees Celsius and is designed for indoor only use.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711E-K10C6?

Answer: Yes. We offer repairs for the 2711E-K10C6 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711E-K10C6?

Answer: If you buy the 2711E-K10C6 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711E-K10C6 online?

Answer: Yes. Automation Stop sells the 2711E-K10C6 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711E-K10C6?

Answer: The 2711E-K10C6 is made by Allen Bradley - HMI.


Question: What type of product is the 2711E-K10C6?

Answer: The 2711E-K10C6 is part of the Panelview 2711E series.


Series information for 2711E-K10C6

For additional information about 2711E-K10C6 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711E-K10C6.

Revision Part # Also Known As Availability
2711E-K10C6/A 2711E-K10C6 Ser A, Series A, Rev A Request a Quote
2711E-K10C6/B 2711E-K10C6 Ser B, Series B, Rev B Request a Quote
2711E-K10C6/C 2711E-K10C6 Ser C, Series C, Rev C Request a Quote
2711E-K10C6/D 2711E-K10C6 Ser D, Series D, Rev D Request a Quote

Common Misspellings:

  • 2711E-K10CG
  • 2711E-K1OC6
  • 2711E-K1OCG
  • 2711E-KI0C6
  • 2711E-KI0CG
  • 2711E-KIOC6
  • 2711E-KIOCG
  • 271IE-K10C6
  • 271IE-K10CG
  • 271IE-K1OC6
  • 271IE-K1OCG
  • 271IE-KI0C6
  • 271IE-KI0CG
  • 271IE-KIOC6
  • 271IE-KIOCG
  • 27I1E-K10C6
  • 27I1E-K10CG
  • 27I1E-K1OC6
  • 27I1E-K1OCG
  • 27I1E-KI0C6
  • 27I1E-KI0CG
  • 27I1E-KIOC6
  • 27I1E-KIOCG
  • 27IIE-K10C6
  • 27IIE-K10CG
  • 27IIE-K1OC6
  • 27IIE-K1OCG
  • 27IIE-KI0C6
  • 27IIE-KI0CG
  • 27IIE-KIOC6
  • 27IIE-KIOCG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP