The 2711C-T10C from Allen-Bradley/Rockwell is a panel belonging to the PanelView Component line. Any user should input commands to the panel with its touch screen UI. The Human-Machine-Interface allows the usage of a memory card to be able to backup runtime applications. The device shall not be exposed tremors above 2 g at 500 hertz. The maximum shock that this model is capable to withstand is 15 g in active conditions and 30 g while the device is off. An access to should be arranged so the user will be able to execute troubleshooting, wiring and maintenance tasks. The energy consumption of this model is around 17.0 watt. The temperature of the environment close to the system must stay between 0 and 50 degrees Celsius while the module is turned on and must remain in the range from -13 to 158 degrees Fahrenheit when the device is off. The 2711C-T10C provides the operator a 211 by 158 millimeters color transmissive TFT active matrix display. The engineer could easily link external systems (e.g: a PLC) to the HMI with its Ethernet slot. A very important condition to maintain the right safety of the system is cooling. The engineer must make sure to have sufficient space within the case and acknowledge other equipment in the resolution.

2711C-T10C is a PanelView Component C300 terminal by Allen-Bradley. For low-level applications with a serial connection, this component-level operator interface provides a control and visualization solution. Web application creates Human-Machine Interface (HMI) applications while your computer is connected directly to the terminal. The direct result shows on the terminal display without having to download it first. It has a size of 12.13 x 9.84 inches with an active display area of 8.31 x 6.2 inches. It has 10.4 inches of Color transmissive TFT active matrix LCD with a resolution of 640 x 480 pixels and analog touch for input with an actuation rate of 1 million presses, and a non-replaceable cold cathode fluorescent lamp (CCFL) backlight with a minimum of 50,000 hours of life. It has an input voltage range from 18VDC to 30VDC with a nominal value of 24VDC, maximum power consumption of 18 watts, and heat dissipation of 58 British thermal units(BTU) per hour. It has an Ethernet port that supports a connection to a computer for application and design communication to a controller. It has a multipurpose RS-232 port which supports DF1 full-duplex communication with controllers using direct/modem connection, and DH-485 communication through a serial connection. Preferred controllers are MicroLogix, SLC, and Micro800. It also has an RS-485 port that supports point-to-point communication, a USB device port for maintenance or programming only, and a USB host port to power USB peripherals. It is connected to a browser using a USB port. Install the Allen-Bradley PanelView USB remote NDIS Network Device driver before connecting your computer to the USB port of the 2711C-T10C. It has internal storage, a USB flash drive, and an SD card for memory options.