GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2711-T14C1

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711-T14C1
Series: Panelview 1400

Description:

Item Number 2711-T14C1 is a terminal that is manufactured by Allen-Bradley. This terminal belongs to the PanelView series of operator terminals. This terminal unit has a 14-inch color touchscreen with a resolution of 800 x 600 pixels. It can operate from 85 to 264 volts AC and from 0 to 55 degrees Celsius. It has incorporated an RS-232 port for printing and an I/O port for remote communications. It weighs 18.17 kilograms, and its size is 354.84 x 441.20 x 394.46 millimeters.


Key Features:

  • provides dimensions of 13.97 x 17.37 x 15.53 in (355 x 441 x 394 mm)
  • provides an operating temperature of 32-131 f (0-55 c)
  • has been discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

Refurbished

$2,200.00

Available: 1

What is Refurbished

Your order will ship by . Need it faster?

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2711-T14C1 is an operator terminal that manufactured by Allen-Bradley and part of the PanelView group of terminals. The device input is performed under touchscreen operation. It has a color screen that is 14 inches wide with an 800 x 600 pixels resolution quality. The size of the individual touch cells is 33 x 37 and there are 384 touch cells, aligned in 24 columns and 16 rows. The terminal can operate under variable input from 85 up to 263 VAC, at a frequency of 43 to 63 Hz, resulting in power consumption up to 200 VA maximum. The unit has an enclosure type NEMA 12/13 or 4x. This terminal has a 1008 kilobytes of flash memory. The device can exchange data with its I/O communication port, and it also possesses an RS-232 port, which is used for printing. Under normal working conditions, the terminal creates an operating vibration equal to 1 g up to 2000 Hz. Its general operating shock is 15 g and the non-operating shock is 30 g. The operational temperature is from 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit), but it can be stored in a wider temperature range from -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The unit can sustain relative humidity of 5 to 95% and its heat diffusion will maintain 78 W (264 BTU/hr.). The complete unit size is 354.84 x 441.20 x 394.46 millimeters (13.97 x 17.37 x 15.51 inches). The dimensions of the touchscreen itself are 254 x 190.5 millimeters (10.0 x 7.5 inches).

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711-T14C1?

Answer: Yes. We offer repairs for the 2711-T14C1 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711-T14C1?

Answer: If you buy the 2711-T14C1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711-T14C1 online?

Answer: Yes. Automation Stop sells the 2711-T14C1 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711-T14C1?

Answer: The 2711-T14C1 is made by Allen Bradley - HMI.


Question: What type of product is the 2711-T14C1?

Answer: The 2711-T14C1 is part of the Panelview 1400 series.


Series information for 2711-T14C1

For additional information about 2711-T14C1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711-T14C1.

Revision Part # Also Known As Availability
2711-T14C1/A 2711-T14C1 Ser A, Series A, Rev A Request a Quote
2711-T14C1/B 2711-T14C1 Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 2711-T14CI
  • 2711-TI4C1
  • 2711-TI4CI
  • 271I-T14C1
  • 271I-T14CI
  • 271I-TI4C1
  • 271I-TI4CI
  • 27I1-T14C1
  • 27I1-T14CI
  • 27I1-TI4C1
  • 27I1-TI4CI
  • 27II-T14C1
  • 27II-T14CI
  • 27II-TI4C1
  • 27II-TI4CI

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP