GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711-T10G20L1 |
Series: | Panelview 1000 |
Description:
The Allen-Bradley PanelView 1000 series 2711-T10G20L1 is a grayscale touch screen display terminal that is diagonally 10.4 inch long and is powered by 24 Volts DC. It has an RS-232 printer connection port and EtherNet/IP enabled communications.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley's reliable product line PanelView 1000 2711-T10G20L1 terminal has a 640 x 480 resolution and a built-in memory of 256-kB. The hardware is supplemented by 2711-ND3 PanelBuilder to allow operators to navigate. The power supply requirement is 24 volts DC with an allowable range of 18 to 32 volts Direct Current. The maximum power consumption is calculated at 1 Ampere supply at 24 Volts Direct Current, resulting in 24 Watts. The terminal screen comes with a screen saver mode, video mode, screen saver timeout, reset video, and adjustability on the screen saver intensity.
The robust terminal can withstand storage temperatures from -25 to 70 degrees Celsius as well as 0 to 55 degrees Celsius operating temperatures. It is tolerant to relative humidity of 5 to 95% provided it is non-condensing over 0 to 55 degrees Celsius. The rugged terminal can withstand operating shock of 15 g, a non-operating shock of 30 g, an operating altitude of 2000 meters or 6561 feet, and operating vibration of 2 g at up to 2000 Hertz. The heat dissipation rate is 39 Watts or 132 British Thermal Units (BTU) per hour. The screen can be secured in NEMA rated enclosure of type 12/13 or 4X based on the application.
Brand | Allen-Bradley / Rockwell Automation |
Series | PanelView 1000 Grayscale Terminals |
Part Number | 2711-T10G20L1 |
Display Size | 211 x 158 mm (8.3 x 6.2 in.) |
Pixels | 640 x 480 |
Weight | 3.00 kg (6.6 lbs) |
Display Color | Grayscale |
Input Type | Touch Screen |
Communication | Ethernet and RS-232 Printer Port |
Total Application Flash Memory | 1008 kB (application screens) |
Shock (operating/nonoperating) | 15 g/30 g |
Vibration (operating) | 2 g up to 2,000 Hz |
Memory | 256 KB |
Input power | 24 VDC (18-32 VDC) |
Maximum power consumption | 24 W |
Storage temperature | -25 to 70°C |
Operating temperature | 0 to 55°C |
Relative humidity | 5 to 95% non-condensing |
Heat dissipation | 39 W (132 Btu/hr) |
Operating shock | 15 g |
Non-operating shock | 30 g |
Operating altitude | 2000 m (6561 ft.) |
Operating vibration | 2 g at up to 2000 Hz |
Question: Does Automation Stop offer repairs on the 2711-T10G20L1?
Answer: Yes. We offer repairs for the 2711-T10G20L1 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711-T10G20L1?
Answer: If you buy the 2711-T10G20L1 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711-T10G20L1 online?
Answer: Yes. Automation Stop sells the 2711-T10G20L1 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711-T10G20L1?
Answer: The 2711-T10G20L1 is made by Allen Bradley - HMI.
Question: What type of product is the 2711-T10G20L1?
Answer: The 2711-T10G20L1 is part of the Panelview 1000 series.
Question: What Brand does the 2711-T10G20L1 have?
Answer: The Allen Bradley-Rockwell Automation 2711-T10G20L1 has a Allen Bradley (AB) / Rockwell Automation Brand.
Question: What is the Communication of the Rockwell-Automation 2711-T10G20L1?
Answer: The Rockwell-Automation 2711-T10G20L1 has a Communication of Ethernet and RS-232 Printer Port.
Question: What Display color-supporting is included with the 2711-T10G20L1?
Answer: The Rockwell Automation 2711-T10G20L1 has a Grayscale Display colored.
Question: What Display Size does the Allen Bradley/Rockwell Automation 2711-T10G20L1 have?
Answer: The Allen Bradley/Rockwell Automation 2711-T10G20L1 has a Display Size of 211 x 158 mm (8.3 x 6.2 in.).
Question: What is the Heat dissipation of the 2711-T10G20L1?
Answer: The Allen-Bradley 2711-T10G20L1 has a Heat dissipation of 39 W (132 Btu/hr).
Question: What is the Input power of the Rockwell-Automation 2711-T10G20L1?
Answer: The Input power of the 2711-T10G20L1 is 24 VDC (18-32 VDC).
Question: What Input Type does the Allen-Bradley 2711-T10G20L1 have?
Answer: The 2711-T10G20L1 has a Touch Screen Input Type.
Question: What Maximum power consumption does the 2711-T10G20L1 have?
Answer: The 2711-T10G20L1 has a Maximum power consumption of 24 W.
Question: What random-access memory (RAM) does the Allen Bradley/Rockwell Automation 2711-T10G20L1 have?
Answer: The random-access memory (RAM) of the 2711-T10G20L1 is 256 KB.
Question: What is the Non-operating shock of the 2711-T10G20L1?
Answer: The Non-operating shock of the 2711-T10G20L1 is 30 g.
Question: What is the Operating altitude of the 2711-T10G20L1?
Answer: The 2711-T10G20L1 has a Operating altitude of 2000 m (6561 ft.).
Question: What Operating shock does the 2711-T10G20L1 have?
Answer: The Allen Bradley-Rockwell Automation 2711-T10G20L1 has a Operating shock of 15 g.
Question: What is the Operating temperature of the 2711-T10G20L1?
Answer: The Rockwell-Automation 2711-T10G20L1 has a Operating temperature of 0 to 55°C.
Question: What Operating vibration does the Rockwell-Automation 2711-T10G20L1 have?
Answer: The Operating vibration of the 2711-T10G20L1 is 2 g at up to 2000 Hz.
Question: What part Number does the 2711-T10G20L1 have?
Answer: The 2711-T10G20L1 has a component Number of 2711-T10G20L1.
Question: What Pixels does the Allen Bradley Automation 2711-T10G20L1 have?
Answer: The Pixels of the Allen Bradley Automation 2711-T10G20L1 is 640 x 480.
Question: What is the Relative humidity of the 2711-T10G20L1?
Answer: The Rockwell Automation 2711-T10G20L1 has a Relative humidity of 5 to 95% non-condensing.
Question: What Shock (operating/nonoperating) does the 2711-T10G20L1 have?
Answer: The Rockwell Automation 2711-T10G20L1 has a Shock (operating/nonoperating) of 15 g/30 g.
Question: What is the Storage temperature of the 2711-T10G20L1?
Answer: The Allen Bradley 2711-T10G20L1 has a Storage temperature of -25 to 70°C.
Question: What is the Total Application Flash random-access memory (RAM) of the 2711-T10G20L1?
Answer: The Allen Bradley/Rockwell Automation 2711-T10G20L1 has a Total Application Flash random-access memory (RAM) of 1008 kB (application screens).
Question: What Vibration (operating) does the Rockwell Automation 2711-T10G20L1 have?
Answer: The Vibration (operating) of the Rockwell Automation 2711-T10G20L1 is 2 g up to 2,000 Hz.
Question: What Weight does the 2711-T10G20L1 have?
Answer: The Weight of the 2711-T10G20L1 is 3.00 kg (6.6 lbs).
For additional information about 2711-T10G20L1 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711-T10G20L1.
Revision Part # | Also Known As | Availability |
---|---|---|
2711-T10G20L1/A | 2711-T10G20L1 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.