GE / IP FANUC Series 90/30 In Stock

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

2711-NM14

✓ In Stock

Manufacturer: Allen Bradley - HMI
Product Type: HMI / Operator Interface
Part Number: 2711-NM14
Series: 2711

Description:

The Allen Bradley 2711-NM14 is a series B flash memory card that was designed to be used with PanelView terminals. This memory card has a storage capacity of 4 megabytes (MB). This memory card was designed to be used at altitudes no greater than 2000 meters without the risk of derating. Additionally, the relative humidity rating of this memory card is 5% to 95% non-condensing. This device weighs approximately 0.049 kilograms and has physical dimensions that measure 5 mm x 4 mm x 2 mm.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

The Allen Bradley 2711-NM14 is a series B, flash memory card designed to be used with PanelView terminals. The memory card has a storage capacity of 4 MB. It is categorized as an ATA card accessory of the PanelView HMI family and is primarily used for storage of applications in PCMCIA for Panelview 300, 550, 600, 900, 1000E, 1200 E and 1400E terminals for additional application memory. The card is also supported by computers with a DataBook TMB240 or TMB250. The Series B flash memory card is designed in accordance with CCC and KC standards. It has dimensions of approximately 5 mm x 4 mm x 2 mm and it has an approximate weight of 0.11 pounds, or the equivalent of 0.049 kilograms. This memory card was designed to be used at altitudes at up to 2000 meters. If used above this altitude, this device may begin to derate. The relative humidity of the area surrounding this product should remain between 5% and 95% while also being non-condensing. This card was not designed to be used in extreme temperatures and must be handled cautiously, as in it should not be bent nor dropped.

The 2711-NM14 memory card is connected to the PanelView terminal via the memory card slot on the terminal’s backside with a retainer attached to the card’s other end. The retainer protects the card against electrical shock from loose high voltage leads in an electrical enclosure. It allows an electrostatic discharge (ESD) of up to 15 kilovolts (kV). The card is inserted into a PanelView standard terminal through a memory card slot. The card can then be accessed by selecting memory card from the configuration mode menu to upload/download applications between a memory card and the terminal.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2711-NM14?

Answer: Yes. We offer repairs for the 2711-NM14 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - HMI and 2711-NM14?

Answer: If you buy the 2711-NM14 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2711-NM14 online?

Answer: Yes. Automation Stop sells the 2711-NM14 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2711-NM14?

Answer: The 2711-NM14 is made by Allen Bradley - HMI.


Series information for 2711-NM14

For additional information about 2711-NM14 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711-NM14.

Revision Part # Also Known As Availability
2711-NM14/A 2711-NM14 Ser A, Series A, Rev A Request a Quote
2711-NM14/B 2711-NM14 Ser B, Series B, Rev B Request a Quote

Common Misspellings:

  • 2711-NMI4
  • 271I-NM14
  • 271I-NMI4
  • 27I1-NM14
  • 27I1-NMI4
  • 27II-NM14
  • 27II-NMI4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP