GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711-NC13 |
Series: | 2711 |
UPC: | 10662468176092 |
Description:
The Allen-Bradley PanelView 2711-NC13 is an efficient accessory that can be used in conjunction with Rockwell Automation?s PanelView terminal Series. The cable is 16.4 feet long and can be used at an altitude of up to 6561 feet.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley PanelView 2711-NC13 is a highly sophisticated data cable that can be used in a variety of industrial systems. This cable belongs to the 2711 family of electronic control components produced by Rockwell Automation and is primarily used for data transfer and communication. The cable can be used to transmit I/O and control signals from the operator terminal to various remote devices within the industrial automation system. The cable can also be used to upload and download applications that can be used to integrate the components of the system with the operator terminal. The device serves as a standard connection that facilitates efficient runtime communication between components of the industrial automation system. The cable can also be used to connect the operator terminal to I/O devices such as printers, keyboards, and scanners.
The Allen-Bradley PanelView 2711-NC13 is a robust cable that can be used for data and file transfer applications. The cable is provided with captive screws on either end to ensure proper fastening and a secure connection. The cable is specially designed to be used in a wide variety of environments and provides excellent performance characteristics in a range of operating conditions. The cable can be used at operating temperatures within the range of 0° Celsius to 55° Celsius. The cables are 5 meters long and are compatible with NEMA-rated enclosures that can be used to house the operator terminals. These devices can withstand an operating vibrational frequency of up to 2000 Hertz and can be used at altitudes of up to 2000 meters.
Brand: | Allen-Bradley / Rockwell Automation |
Series: | PanelView Standard Terminal Cables |
Part Number: | 2711-NC13 |
Type: | RS-232 operating/program cable |
Cable length: | 5 m (16.4 ft) |
Number of pins: | 9 |
Enclosure Ratings: | NEMA Type 12, 13, 4X (Indoor use only), IEC IP54, IP65 |
Operating temperature: | 0° to +55°C (+32° to +131°F) |
Storage temperature: | -25° to +70°C (-13° to +158°F) |
Shock (operating): | 15 g at 11 ms |
Shock (nonoperating): | 30 g at 11 ms |
Vibration (operating): | 2g up to 2000 Hz |
Altitude (operating): | 2000 m (6561 ft) |
Relative Humidity: | 5-95% noncondensing |
Heat Dissipation: | 8.5-132 BTU/hr |
Question: Does Automation Stop offer repairs on the 2711-NC13?
Answer: Yes. We offer repairs for the 2711-NC13 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711-NC13?
Answer: If you buy the 2711-NC13 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711-NC13 online?
Answer: Yes. Automation Stop sells the 2711-NC13 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711-NC13?
Answer: The 2711-NC13 is made by Allen Bradley - HMI.
Question: What Altitude (operating): does the 2711-NC13 have?
Answer: The Altitude (operating): of the Allen-Bradley 2711-NC13 is 2000 m (6561 ft).
Question: What Brand: does the Allen-Bradley 2711-NC13 have?
Answer: The 2711-NC13 has a Allen Bradley (AB) / Rockwell Automation Brand:.
Question: What Cable length: does the Allen Bradley 2711-NC13 have?
Answer: The Cable length: of the 2711-NC13 is 5 m (16.4 ft).
Question: What is the Enclosure Ratings: of the Allen Bradley/Rockwell Automation 2711-NC13?
Answer: The 2711-NC13 has a Enclosure Ratings: of NEMA Type 12, 13, 4X (Indoor use only), IEC IP54, IP65.
Question: What is the Heat Dissipation: of the 2711-NC13?
Answer: The Heat Dissipation: of the Allen Bradley-Rockwell Automation 2711-NC13 is 8.5-132 BTU/hr.
Question: What is the Number of pins: of the 2711-NC13?
Answer: The Rockwell Automation 2711-NC13 has a Number of pins: of 9.
Question: What is the Operating temperature: of the 2711-NC13?
Answer: The Operating temperature: of the Allen Bradley/Rockwell Automation 2711-NC13 is 0° to +55°C (+32° to +131°F).
Question: What is the component Number: of the 2711-NC13?
Answer: The Allen Bradley Automation 2711-NC13 has a unit Number: of 2711-NC13.
Question: What is the Relative Humidity: of the Allen Bradley/Rockwell Automation 2711-NC13?
Answer: The Relative Humidity: of the Allen Bradley/Rockwell Automation 2711-NC13 is 5-95% noncondensing.
Question: What Series: is included with the 2711-NC13?
Answer: The Allen Bradley/Rockwell Automation 2711-NC13 has a PanelView Standard Terminal Cables Series:.
Question: What Shock (nonoperating): does the Allen Bradley/Rockwell Automation 2711-NC13 have?
Answer: The Shock (nonoperating): of the Allen Bradley/Rockwell Automation 2711-NC13 is 30 g at 11 ms.
Question: What is the Shock (operating): of the Rockwell Automation 2711-NC13?
Answer: The 2711-NC13 has a Shock (operating): of 15 g at 11 ms.
Question: What is the Storage temperature: of the 2711-NC13?
Answer: The Storage temperature: of the 2711-NC13 is -25° to +70°C (-13° to +158°F).
Question: What is the Type: of the 2711-NC13?
Answer: The 2711-NC13 has a Type: of RS-232 operating/program cable.
Question: What Vibration (operating): does the Allen Bradley Automation 2711-NC13 have?
Answer: The 2711-NC13 has a Vibration (operating): of 2g up to 2000 Hz.
For additional information about 2711-NC13 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711-NC13.
Revision Part # | Also Known As | Availability |
---|---|---|
2711-NC13/A | 2711-NC13 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.