GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - HMI |
Product Type: | HMI / Operator Interface |
Part Number: | 2711-K10C8X |
Series: | 2711 |
Description:
The Allen-Bradley 2711-K10C8X is an HMI operator terminal of the PanelView 1000 series. It is used to control operations in devices via a 16 function-key keypad for control and data input, as well as a 10.5-inch, 640 x 480 pixels screen for display. It requires a power supply of 18 to 32 volts DC. It has physical dimensions of 11.11 x 16.64 x 4.40 inches, with a display screen area of 211 x 158 mm (8.3 x 6.2 inches), and an approximate weight of 3.7 kilograms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 2711-K10C8X is a PanelView human machine interface (HMI) operator terminal that enables users to interact with electronic devices. This operator terminal allows data entry and control through a keypad with 16 function keys (F1 through F16), numeric keys, as well as navigation and confirmation keys. It displays device parameters through a 10-inch color active-matrix display. The HMI is designed with a resolution of 640 x 480 pixels and a 50,000-hour LED backlight life at room temperature. The HMI has an application memory of 310 KB at runtime and 1008 KB nonvolatile memory (for application objects, text and bitmaps). It requires a power supply of 85 to 264 volts AC at 47 to 63 Hz at room temperature (25 °C / 77 °F). The PanelView operator terminal also supports an ATA memory card for storing data files and applications.
The operator terminal is compatible with various Allen-Bradley controllers including the PLC5, SLC500, CompactLogix, ControlLogix and MicroLogix controllers. It can also be connected to 3rd party external devices or smart hardware like protocol converters and gateways. The operator is compact and easy to use with physical dimensions of 11.11 x 16.64 x 4.40 inches, a display area of 211 x 158 mm (8.3 x 6.2 inches), and an approximate weight of 3.7 kilograms (8.2 pounds). This HMI can be installed in NEMA Type 12/ 13 or 4X (Indoor) rated enclosed spaces.
Question: Does Automation Stop offer repairs on the 2711-K10C8X?
Answer: Yes. We offer repairs for the 2711-K10C8X and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - HMI and 2711-K10C8X?
Answer: If you buy the 2711-K10C8X through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2711-K10C8X online?
Answer: Yes. Automation Stop sells the 2711-K10C8X online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2711-K10C8X?
Answer: The 2711-K10C8X is made by Allen Bradley - HMI.
For additional information about 2711-K10C8X check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2711-K10C8X.
Revision Part # | Also Known As | Availability |
---|---|---|
2711-K10C8X/A | 2711-K10C8X Ser A, Series A, Rev A | Request a Quote |
2711-K10C8X/B | 2711-K10C8X Ser B, Series B, Rev B | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.