GE / IP FANUC Series 90/30 In Stock
Manufacturer: | ABB Taylor Mod 300 |
Product Type: | Automation Product |
Part Number: | 6235BP10810 |
Series: | 623 624 Series |
UPC: | 890892383684 |
Description:
Part number 6235BP10810 is a current source analog input block. Designed and produced by Allen Bradley / Rockwell Automation, this device has a total of six (6) separate input ports. Each of these ports have a current consumption rating of 4 to 20 milliamperes. This device has a rated voltage range of 24 to 48 volts direct current (DC). This product has a heat dissipation rating of 12 watts when operating at full capacity. This input block is equipped with two (2) LED indicators.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 6235BP10810, which is a current source analog input block, features a voltage range of 24 to 48 volts direct current (DC). When operating at full capacity, this input block has a heat dissipation rating of 12 watts. This input block can operate successfully within a temperature range of 32 to 140 degrees Fahrenheit, which is the equivalent range of 0 to 60 degrees Celsius. When storing this current source analog input block, the temperature rating ranges from -40 to +212 degrees Fahrenheit, or the equivalent temperature range of -40 to +100 degrees Celsius. Similar to other industrial equipment, the Allen Bradley 6235BP10810 must be housed in a setting with a relative humidity rating of 5% to 95% that also has no condensation.
The Allen Bradley 6235BP10810 is a lightweight and compact current source analog input block. The shipping weight of this input block is approximately four (4) pounds, which is equivalent to roughly 1.8 kilograms. The shipping dimension of this current source analog input block is 8.83 inches x 3.5 inches x 3.94 inches, or 22.44 centimeters x 8.89 centimeters x 10 centimeters. There are two (2) separate LED (light emitting diode) indicators on this current source analog input block. One of the LEDs is responsible for showing the “Unit OK” message, while the other LED is responsible for showing the “I/O Enabled” message. The "Unit OK" LED signifies that the block is operating like it should be. On the other hand, the “I/O Enabled” LED signifies whether the inputs on this block are active or not.
Question: Does Automation Stop offer repairs on the 6235BP10810?
Answer: Yes. We offer repairs for the 6235BP10810 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the ABB Taylor Mod 300 and 6235BP10810?
Answer: If you buy the 6235BP10810 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 6235BP10810 online?
Answer: Yes. Automation Stop sells the 6235BP10810 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 6235BP10810?
Answer: The 6235BP10810 is made by ABB Taylor Mod 300.
For additional information about 6235BP10810 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 6235BP10810.
Revision Part # | Also Known As | Availability |
---|
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.