Emerson - GE Fanuc IC697CPX935

The GE Fanuc Emerson IC697CPX935 is a 96 Megahertz, 32-Bit, Floating Point CPU with 1 Megabyte of memory. This hardware serves as a single-slot CPU with three serial ports and provides 1 Megabyte of battery-backed memory in the same slot. Additional features of the IC697CPX935 include 256K of non-volatile user flash memory, BMA support (7.92 or later), and support of floating-point calculations. The IC697CPX935 has 12K inputs and outputs and up to 8K analog I/O. The microprocessor used for this module is an 80486DX4 (96 Megahertz). It has configurable program and data memory, a battery-backed calendar clock, a three-position operation mode switch, and password-controlled access. The IC697CPX935 also provides remote programmer key switch memory protection, seven status LEDs, software configuration (No DIP switches or jumpers), and in-system upgradeable firmware.

This IC697CPX935 CPU utilizes non-volatile flash memory for storage of the system firmware; by doing this, it allows for updates without having to disassemble the IC697CPX935 module or replace EPROMs. To update the operating system firmware, connect a PC compatible computer to the serial port on the module and run the software included with the firmware upgrade kit. Specifications for the IC697CPX935 include a battery shelf life of 5 years at 20 degrees Celsius (68 degrees Fahrenheit) and a battery memory retention of 6 months nominal without applied power. The current required from 5 Volt bus is 3.1 Amperes nominal and the module has an operating temperature range between 0 and 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. Time of day clock accuracy for the IC697CPX935 is 3.5 seconds per day maximum, while elapsed time clock accuracy is .01% maximum.

The IC697CPX935 CPU manufactured by GE Fanuc is a single-slot PLC CPU, it belongs to the GE Intelligent Platforms and GE Fanuc PLC Series 90-70 product range. This Module has three serial ports built-in and can control systems in real-time. Through the rack placed on the backplane, the IC697CPX935 CPU connects with several intelligent option modules utilizing the VMEC.1 standard. The CPU might be driven by a 3-position run-and-stop control adjustment switch or by connecting to a computer through software. It also has a 96 MHz CPU, which allows for floating-point computations every 0.4 microseconds. The IC697CPX935 CPU can handle up to 8000 analog inputs and outputs signals and 12,000 inputs and outputs signals in any combination.
 Modules from the GE IC697 family, analog and discrete I/O modules, and alphanumeric and programmable display processors are supported by the GE Fanuc IC697CPX935 CPU. Communication modules, GE IC660 and IC661 bus controllers, and link or LAN interface modules are all supported. The single-slot PLC CPU IC697CPX935 has 1 MB of RAM, which is supported by the IC697ACC701 battery. It also has 256 KB of user data storage in flash memory. The system firmware is stored in the flash memory of this device. When upgrading the firmware on this device, users do not have to dismantle it or change the EPROM. The GE Fanuc IC697CPX935 CPU is set up with the help of a connected computer running Windows NT or Windows operating system servicing systems and software programs MS-DOS. For connections to the programmer's computer, a serial, EtherNet, or parallel interface is utilized.

The IC697CPX935 CPU manufactured by GE Fanuc is a single-slot PLC CPU, it belongs to the GE Intelligent Platforms and GE Fanuc PLC Series 90-70 product range. This Module has three serial ports built-in and can control systems in real-time. Through the rack placed on the backplane, the IC697CPX935 CPU connects with several intelligent option modules utilizing the VMEC.1 standard. The CPU might be driven by a 3-position run-and-stop control adjustment switch or by connecting to a computer through software. It also has a 96 MHz CPU, which allows for floating-point computations every 0.4 microseconds. The IC697CPX935 CPU can handle up to 8000 analog inputs and outputs signals and 12,000 inputs and outputs signals in any combination.
 Modules from the GE IC697 family, analog and discrete I/O modules, and alphanumeric and programmable display processors are supported by the GE Fanuc IC697CPX935 CPU. Communication modules, GE IC660 and IC661 bus controllers, and link or LAN interface modules are all supported. The single-slot PLC CPU IC697CPX935 has 1 MB of RAM, which is supported by the IC697ACC701 battery. It also has 256 KB of user data storage in flash memory. The system firmware is stored in the flash memory of this device. When upgrading the firmware on this device, users do not have to dismantle it or change the EPROM. The GE Fanuc IC697CPX935 CPU is set up with the help of a connected computer running Windows NT or Windows operating system servicing systems and software programs MS-DOS. For connections to the programmer's computer, a serial, EtherNet, or parallel interface is utilized.