Allen-Bradley 2711C-T6M

The 2711C-T6M from Allen-Bradley/Rockwell is an operator terminal that is part of the PanelView Component line. An essential condition to maintain the proper safety of the device is cooling. The engineer shall guarantee adequate space in the case and take into account other devices in these considerations. The panel is equipped with a 115 wide and 86 tall monochromatic transmissive FSTN passive matrix display. The terminal allows the usage of an additional memory card in order to download and backup programs. The ambient temperature around the panel must be kept between 0 and 50 degrees Celsius when the module is running and should be in the range from -25 to 70 degrees Celsius while the system is off. The user can send commands to the terminal using its touch-screen UI. The operator could easily link other systems, such as PLCs, to the module with its Ethernet port. The strongest shock that this model is capable to withstand is 15 g during active settings and 30 g when the system is shut down. The power dissipated by the 2711C-T6M is 9.4 watt. A way to should always be ensured so the user will manage to carry out maintenance, wiring and troubleshooting duties. The system should not be exposed oscillations heavier than 2 g at the frequency of 500 hertz.

2711C-T6M is a PanelView Component C600 terminal by Allen-Bradley. For low-level applications with a serial connection, this component-level operator interface provides a control and visualization solution. Web application creates Human-Machine Interface (HMI) applications while your computer is connected directly to the terminal. The direct result shows on the terminal display without having to download it first. It has a size of 8.23 x 6.0 inches with an active display area of 4.53 x 3.39 inches. It has 5.7 inches Monochrome transmissive FSTN passive matrix display with a resolution of 320 x 240 pixels. It comes with an analog touch for input with an actuation rate of 1 million presses, and a non-replaceable cold cathode fluorescent lamp (CCFL) backlight with a minimum of 50,000 hours of life. It has an input voltage range from 18VDC to 30VDC with a nominal value of 24VDC, maximum power consumption of 10 watts, and heat dissipation of 32 British thermal units(BTU) per hour. It has an Ethernet port that supports a connection to a computer for application and design communication to a controller. It has a multipurpose RS-232 port which supports DF1 full-duplex communication with controllers using direct/modem connection, and DH-485 communication through a serial connection. Preferred controllers are MicroLogix, SLC, and Micro800. It also has an RS-485 port that supports point-to-point communication, a USB device port for maintenance or programming only, and a USB host port to power USB peripherals. It is connected to a browser using a USB port. Install the Allen-Bradley PanelView USB remote NDIS Network Device driver before connecting your computer to the USB port of the 2711C-T6M. It has internal storage, a USB flash drive, and an SD card for memory options.