2097-V33PR5-LM

The Allen-Bradley brand Kinetix 350 single-axis EtherNet/IP servo drive 2097-V33PR5-LM benefits from the safe torque-off function. It has two options of 120/240 Volt single-phase or 240 Volt three-phase and continuous output current of 11.3 Amperes. Based on its enclosure and power usage, the maximum power dissipation is calculated to be 67 Watts. The drive can be scaled to match the system size and configured to work over the network. It communicates and functions using ControlLogix supported EtherNet/IP network which also allows for maintaining the same codes on products on the system network. It has a compact physical design that is easy to install and configure.

The input voltage ranges are 80 to 132 Volts rmx single-phase (120 Volts nominal), 80 to 264 Volts rms single-phase (240 Volts nominal) and 80 to 264 Volts rms three-phase (240 Volts nominal). The input frequency can vary from 48 to 62 Hertz. The main input current for single phase is 15 Amperes with max inrush of 1.15 Amperes and that for three phase is 8.7 with inrush limit of 2.3 Amperes. It does not have an integrated AC line filter. The input voltage for control power back-up is 20 to 26 Volts DC and current is 500 milliamps with inrush limit of 30 Amperes. On the output side, the current (rms) is continuous 8.0 Amperes and 0 to peak is 11.3 Amperes with peak (rms) at 24 Amperes and peak (0-pk) at 33.9 Amperes. The continuous power output with 240 volts is 2 kilowatts.

The 2097-V33PR5-LM can generate a continuous output current rating of 8.0 amperes. At 0 peak, it can generate a continuous output current of 11.3 amperes. The peak output current rating for this servo drive is 24.0 amperes. At 0 peak, the maximum output current rating for this servo drive is 33.9 amperes. It comes with the SSTO feature which can be triggered using hard wiring. At 120 volts, users have access to doubler mode as well. Unfortunately, there are no EMC filters on this servo drive. The dimension of this drive is 9.37 inches x 7.29 inches x 4.1 inches. This drive weighs only 3.3 pounds. This drive can be used for heavy-duty industrial motor control applications. This servo drive is particularly designed for production and manufacturing industries. There are several variations of this servo drive. It is available in 400 volts, 200 volts, and 100 volts variations. At 1 -phase, this drive needs to be supplied with an input voltage of 80 to 132 volts alternating current.

The 2097-V33PR5-LM executes motion control commands using the built-in communication port. This port is further used for communicating with connected HMIs. Although it comes with simple standard communication protocols, this servo drive can also execute modern communication. This servo drive can be used with PLCs from a wide range of industrial PACs. Direct integration with different parameters can be executed using the integrated add-ons. Users do not need to manually make logs and monitor control parameters. This drive works perfectly with actuators and other servo drives from the TL and MP series.