2097-V32PR2-LM

The 2097-V32PR2-LM is a Kinetix 350 single-axis EtherNet/IP servo drive designed and manufactured by Allen-Bradley. The Kinetix 350 single-axis EtherNet/IP servo drive is designed to provide a solution for applications with output power requirements between 0.4 to 3.0 kilowatts (2 to 12 amperes rms). The 2097-V32PR2-LM operates on single-phase 240 VAC and provides a continuous output current of 5.7 A. The drive has a power dissipation of 39 W and provides an output power of 0.80 kW. The drive features an integrated AC line filter and safe torque-off feature. This drive is compatible with the Logix programmable automation controllers (PAC) platform, especially the ControlLogix 1756-L7x and 1756-L7xS controllers, as well as the CompactLogix 5370 controllers. This drive has the added benefit of compatibility with controllers that enable integrated motion via Ethernet I/P. By simplifying connectivity, integrating the 2097-V32PR2-LM with the controller delivers a cost-effective solution. The 2097-V32PR2-LM's front panel includes a display that displays diagnostic and status information. On the front panel, there is also an RJ-45 10 Mbps Ethernet port for network connectivity. The logic and communication circuits in the 2097-V32PR2-LM can be powered by an external source. In the case of the main power outage, an external 24 volt (20 to 26 VDC) (at 1 Amp) power source attached to the backup-power connection can power the logic and communication circuits. The 2097-V32PR2-LM dissipates 39 watts of power. A 3-millimeter clearance is required on both sides of the drive. In addition, there must be 25 millimeters of room on the top and bottom sides for ventilation and installation. The drive is 182 x 69 x 230 millimeters and weighs 3.7 pounds. The working temperature range is 0 to 40 degrees Celsius with a relative humidity of 5 to 95 percent. Memory modules and a memory module programmer are available as accessories, as are AC line filters, an I/O terminal block, and a shunt resistor.