GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200PWR102 |
| Series: | Versamax |
| UPC: | 799705798519 |
Description:
The IC200PWR102 is an expanded power supply unit with extended functionality. The module is manufactured by GE Fanuc and belongs to the VersaMax series. This power supply supplies power to the devices that are connected to the backplane of the controller. The controller has a nominal input voltage of 120 or 240 VAC, depending on if a jumper is installed. The IC200PWR102 has an input power of 27 volt-amperes and provides protection against short circuits and overloads.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC200PWR102 is a VersaMax expanded power supply that provides sufficient electrical power to backplane devices such as NIUs, I/O modules, and CPUs. This power supply supports an input voltage of either 120 Volts AC or 240 Volts AC at a frequency range from 47 to 63 Hertz through the jumper selection with an input power of 27 Volt-amperes. The IC200PWR102 power can be extended by 3.3 Volts DC. This power supply has a holdup time of 20 milliseconds. The power supply supports an input voltage from 85 Volts AC to 132 Volts AC with the presence of the jumper and an input voltage from 176 Volts AC to 264 Volts AC without the presence of the jumper.
The IC200PWR102 offers an output voltage of either 5 Volts DC or 3.3 Volts DC. This power supply offers both short circuit and overload protection. The IC200PWR102 can be employed either as the principal power when installed on the NIU or CPU module or as a secondary power when installed on a power supply booster carrier. The power supply delivers a maximum output current of 1.5 Amperes for 5 Volts DC and 3.3 Volts DC outputs, and a maximum output current of 1 Ampere for 3.3 Volts DC output. This power supply includes a latch hole to secure and fasten the enclosure on the system. The IC200PWR102 weighs approximately 140 grams (0.30 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
IC200PWR102 by GE Fanuc is an expanded power supply unit with extended functionality. It belongs to the VersaMax series. This supply unit helps provide power to the various devices that are connected to the backplane of the controller. These devices include different input and output units, central processing units, and network interface units. The unit can be used as a primary power supply or as a supplemental power supply. The IC200PWR102 differs from other power supply units in that it uses AC power instead of DC power. The input voltage of this expanded power supply unit is in the range of 120 to 240 VAC, whereas its output voltage is 5 VDC and 3.3 VDC. In the absence of a jumper, the module can be easily operated at 120 volts AC. However, if a jumper is used with 240 VAC, it might cause serious damage to the power supply unit and the surrounding area. This module has to be installed accurately following the guidelines given so that proper operation can be achieved without any damage to the module or surroundings. It is widely used for industrial applications because of its extended functionality. The total output current of this expanded power supply unit should not exceed 1.5 A, combined between the two outputs. For example, if the 5 V output requires 1 A, the 3.3 V output should not exceed 0.5 A. The power supply operates without a jumper installed. This will, however, cause the hold-up specification to not be met.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | Versamax |
| Part Number | IC200PWR102 |
| Description | 120/240 volts AC expanded 3.3 volts VersaMax power supply |
| Input Voltage | 85 to 132 VAC with jumper installed, 120VAC nominal / 176 to 264 VAC without jumper installed, 240VAC nominal |
| Input Power | 27 VA |
| Frequency | 47 to 63 Hertz |
| Holdup Time | 20 ms |
| Output Voltage | 5 VDC, 3.3 VDC |
| Protection | Short circuit, overload |
| Output Current | Total of 1.5A maximum / 1.0A maximum at 3.3VDC / 1.5A at 5 VDC |
| Dimensions | 49 mm (1.93 in) x 133.4 mm (5.25 in) x 39 mm (1.54 in), not including the height of the carrier or the DIN-rail |
| Extended Power | Yes |
| Operating Temperature | 0°C to 60°C (32°F to 140°F) |
| Weight | 140 g (0.30 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC200PWR102?
Answer: Yes. We offer repairs for the IC200PWR102 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200PWR102?
Answer: If you buy the IC200PWR102 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200PWR102 online?
Answer: Yes. Automation Stop sells the IC200PWR102 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200PWR102?
Answer: The IC200PWR102 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Allen Bradley-Rockwell Automation IC200PWR102?
Answer: The IC200PWR102 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description does the Allen Bradley IC200PWR102 have?
Answer: The Description of the IC200PWR102 is 120/240 volts alternating current (AC) expanded 3.3 volts VersaMax power supply unit.
Question: What is the Dimensions of the IC200PWR102?
Answer: The Dimensions of the IC200PWR102 is 49 mm (1.93 in) x 133.4 mm (5.25 in) x 39 mm (1.54 in), not including the height of the carrier or the DIN-rail.
Question: Does the Allen Bradley Automation IC200PWR102 have a Extended Power?
Answer: Yes.
Question: What Frequency does the IC200PWR102 have?
Answer: The Frequency of the IC200PWR102 is 47 to 63 Hertz.
Question: What Holdup Time does the IC200PWR102 have?
Answer: The Holdup Time of the IC200PWR102 is 20 ms.
Question: What is the Input Power of the IC200PWR102?
Answer: The Input Power of the IC200PWR102 is 27 VA.
Question: What is the Input Voltage of the IC200PWR102?
Answer: The Input Voltage of the IC200PWR102 is 85 to 132 VAC (voltage alternating current) with jumper installed, 120VAC nominal / 176 to 264 VAC (voltage alternating current) without jumper installed, 240VAC nominal.
Question: What is the Operating Temperature of the Rockwell Automation IC200PWR102?
Answer: The IC200PWR102 has a Operating Temperature of 0°C to 60°C (32°F to 140°F).
Question: What is the Output Current of the Allen Bradley-Rockwell Automation IC200PWR102?
Answer: The Output Current of the Allen Bradley-Rockwell Automation IC200PWR102 is Total of 1.5A maximum / 1.0A maximum at 3.3VDC / 1.5A at 5 VDC.
Question: What is the Output Voltage of the IC200PWR102?
Answer: The IC200PWR102 has a Output Voltage of 5 VDC, 3.3 VDC.
Question: What is the part Number of the IC200PWR102?
Answer: The IC200PWR102 has a component Number of IC200PWR102.
Question: What Protection does the IC200PWR102 have?
Answer: The Rockwell-Automation IC200PWR102 has a Short circuit, overload Protection.
Question: What is the Weight of the Allen-Bradley IC200PWR102?
Answer: The Weight of the IC200PWR102 is 140 g (0.30 lb).
Series information for IC200PWR102
For additional information about IC200PWR102 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200PWR102.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200PWR102B | IC200PWR102 Series B, Rev B | Request a Quote |
| IC200PWR102C | IC200PWR102 Series C, Rev C | Request a Quote |
| IC200PWR102D | IC200PWR102 Series D, Rev D | Request a Quote |
| IC200PWR102E | IC200PWR102 Series E, Rev E | Request a Quote |
| IC200PWR102F | IC200PWR102 Series F, Rev F | Request a Quote |
| IC200PWR102H | IC200PWR102 Series H, Rev H | Request a Quote |
Common Misspellings:
- IC200PWR1O2
- IC200PWRI02
- IC200PWRIO2
- IC20OPWR102
- IC20OPWR1O2
- IC20OPWRI02
- IC20OPWRIO2
- IC2O0PWR102
- IC2O0PWR1O2
- IC2O0PWRI02
- IC2O0PWRIO2
- IC2OOPWR102
- IC2OOPWR1O2
- IC2OOPWRI02
- IC2OOPWRIO2
- 1C200PWR102
- 1C200PWR1O2
- 1C200PWRI02
- 1C200PWRIO2
- 1C20OPWR102
- 1C20OPWR1O2
- 1C20OPWRI02
- 1C20OPWRIO2
- 1C2O0PWR102
- 1C2O0PWR1O2
- 1C2O0PWRI02
- 1C2O0PWRIO2
- 1C2OOPWR102
- 1C2OOPWR1O2
- 1C2OOPWRI02
- 1C2OOPWRIO2
