GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC200MDL940 |
| Series: | Versamax |
| UPC: | 12404391264 |
Description:
The GE Fanuc Emerson IC200MDL940 is a Versamax relay output module that includes 16 discrete output points which deliver a voltage rating range from either zero (0) Volts AC to 265 Volts AC at a frequency of 47 to 63 Hertz or from zero (0) Volts DC to 125 Volts DC and an output current of 2 Amperes per point. The IC200MDL940 outputs are grouped into two (2) well-isolated groups of eight (8) outputs with a separate power terminal for each group (Q1 - Q8 and Q9 ? Q16), which are labeled with green LED indicators to show the on/off status of outputs.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC200MDL940 is a Versamax relay output module that includes 16 discrete output points which deliver a voltage rating range either from zero (0) Volts AC to 265 Volts AC at a frequency range from 47 to 63 Hertz or from zero (0) Volts DC to 125 Volts DC and an output current of 2 Amperes per point. The IC200MDL940 outputs are grouped into two (2) well-isolated groups of eight (8) outputs with a separate power terminal for each group (Q1 - Q8 and Q9 – Q16), which are labeled with green LED indicators to show the on/off status of outputs. The IC200MDL940 is a form A module. The IC200MDL940 logical operation is achieved by connecting a CPU to this module; it has an output voltage drop of 0.3 Volts.
The IC200MDL940 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 Volts AC continuously between logic and frame ground and 1500 Volts AC for one minute. The IC200MDL940 has a minimum load current of 10 milliamperes for each point. The IC200MDL940 can be employed in many industrial applications such as solenoids, motor starters and inductive loads. The IC200MDL940 includes a fixed coil relay with mobile armatures and silver contacts. This module draws a current rating of 490 milliamperes at a voltage rating of +5 Volts DC on the backplane with all outputs on the ON status. The IC200MDL940 weighs approximately 290 grams (0.64 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | Versamax |
| Part Number | IC200MDL940 |
| Description | 16 points, 24 VDC/120 volts AC and 2 amperes PLC relay output module |
| Number of I/O Points | 16 individually-isolated Form A relay outputs |
| Outputs per Module | 2 of eight outputs each |
| Rated Voltage | 24 V DC/ 120-240 Volts AC |
| Output Voltage Range | 0 to 125VDC, 5/24/125VDC nominal \ 0 to 265VAC (47 to 63Hz), 120/240VAC nominal |
| Isolation : User input to logic (optical) and frame ground/Group to group | 250 VAC continuous; 1500 VAC for 1 minute |
| Output Current | 10mA per point minimum / 2.0A for 5 to 265VAC maximum (resistive) / 2.0A for 5 to 30 VDC maximum (resistive) / 0.2A for 31 to 125 VDC maximum (resistive) |
| Output Voltage Drop | 0.3 Volts maximum |
| On Response Time | 10 ms maximum |
| Off Response Time | 10 ms maximum |
| Internal Power Consumption | 490 mA (all outputs on) from 5 volt bus on backplane |
| Operating Temperature | 0 to 60 degrees C (32 to 140 degrees F) |
| Weight | 290 g (0.64 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC200MDL940?
Answer: Yes. We offer repairs for the IC200MDL940 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDL940?
Answer: If you buy the IC200MDL940 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC200MDL940 online?
Answer: Yes. Automation Stop sells the IC200MDL940 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC200MDL940?
Answer: The IC200MDL940 is made by Emerson - GE Fanuc.
Question: What Brand does the Allen Bradley-Rockwell Automation IC200MDL940 have?
Answer: The IC200MDL940 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Description of the IC200MDL940?
Answer: The IC200MDL940 has a Description of 16 points, 24 VDC/120 volts AC (alternating current) and 2 amperes PLC relay output module.
Question: What is the Internal Power Consumption of the IC200MDL940?
Answer: The IC200MDL940 has a Internal Power Consumption of 490 mA (all outputs on) from 5 volt bus on backplane.
Question: What is the Isolation : User input to logic (optical) and frame ground/Group to group of the Allen-Bradley IC200MDL940?
Answer: The IC200MDL940 has a Isolation : User input to logic (optical) and frame ground/Group to group of 250 voltage alternating current (VAC) continuous; 1500 voltage alternating current (VAC) for 1 minute.
Question: What is the Number of input/output Points of the Allen Bradley IC200MDL940?
Answer: The IC200MDL940 has a Number of input/output Points of 16 individually-isolated Form A relay outputs.
Question: What is the Off Response Time of the IC200MDL940?
Answer: The IC200MDL940 has a Off Response Time of 10 ms maximum.
Question: What is the On Response Time of the Rockwell Automation IC200MDL940?
Answer: The IC200MDL940 has a On Response Time of 10 ms maximum.
Question: What Operating Temperature does the IC200MDL940 have?
Answer: The Operating Temperature of the IC200MDL940 is 0 to 60 degrees C (32 to 140 degrees F).
Question: What is the Output Current of the IC200MDL940?
Answer: The Rockwell Automation IC200MDL940 has a Output Current of 10mA per point minimum / 2.0A for 5 to 265VAC maximum (resistive) / 2.0A for 5 to 30 VDC maximum (resistive) / 0.2A for 31 to 125 VDC maximum (resistive).
Question: What is the Output Voltage Drop of the IC200MDL940?
Answer: The Rockwell-Automation IC200MDL940 has a Output Voltage Drop of 0.3 Volts maximum.
Question: What is the Output Voltage Range of the IC200MDL940?
Answer: The Output Voltage Range of the Allen Bradley-Rockwell Automation IC200MDL940 is 0 to 125VDC, 5/24/125VDC nominal \ 0 to 265VAC (47 to 63Hz), 120/240VAC nominal.
Question: What is the Outputs per Module of the IC200MDL940?
Answer: The Rockwell-Automation IC200MDL940 has a Outputs per Module of 2 of eight outputs each.
Question: What is the component Number of the IC200MDL940?
Answer: The component Number of the IC200MDL940 is IC200MDL940.
Question: What is the Rated Voltage of the Allen Bradley/Rockwell Automation IC200MDL940?
Answer: The IC200MDL940 has a Rated Voltage of 24 V direct current (DC)/ 120-240 Volts AC (alternating current).
Question: What is the Weight of the IC200MDL940?
Answer: The Weight of the IC200MDL940 is 290 g (0.64 lb).
Series information for IC200MDL940
For additional information about IC200MDL940 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDL940.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC200MDL940A | IC200MDL940 Series A, Rev A | Request a Quote |
| IC200MDL940D | IC200MDL940 Series D, Rev D | Request a Quote |
| IC200MDL940E | IC200MDL940 Series E, Rev E | Request a Quote |
| IC200MDL940L | IC200MDL940 Series L, Rev L | Request a Quote |
Common Misspellings:
- IC200MDL94O
- IC20OMDL940
- IC20OMDL94O
- IC2O0MDL940
- IC2O0MDL94O
- IC2OOMDL940
- IC2OOMDL94O
- 1C200MDL940
- 1C200MDL94O
- 1C20OMDL940
- 1C20OMDL94O
- 1C2O0MDL940
- 1C2O0MDL94O
- 1C2OOMDL940
- 1C2OOMDL94O
