GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC200MDL930

✓ In Stock

IC200MDL930 Image 1 thumbnail
IC200MDL930 Image 2 thumbnail
IC200MDL930 Image 3 thumbnail
IC200MDL930 Image 4 thumbnail
IC200MDL930 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC200MDL930
Series: Versamax
UPC: 913142764931

Description:

The GE Fanuc Emerson IC200MDL930 is a VersaMax relay output module that includes eight (8) channels. These outputs deliver a voltage of 5, 24, or 125 volts DC and 120 or 240 volts AC. The device weighs approximately 240 grams (0.53 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC200MDL930 is a VersaMax relay output module that includes eight (8) channels that deliver a voltage rating range either from 0 volts AC to 265 volts AC at a frequency range from 47 hertz to 63 hertz or from 0 volts DC to 125 volts DC and an output current of 2 amperes per point. These outputs are labeled with green LED indicators to show the on/off status of outputs. This device is a form A module. The logical operation is achieved by connecting a CPU to this module. The module has an output voltage drop of 0.3 volts. This unit offers an on response time of 10 milliseconds and an off response time of 10 milliseconds. The processing can be performed by either NIU or a CPU.

The IC200MDL930 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 250 volts AC continuously between logic and frame ground and 1500 volts AC for one minute. This output module has a minimum load current of 10 milliamperes for each point. The IC200MDL930 can be employed in many industrial applications such as solenoids, motor starters, and inductive loads. The module includes a fixed coil relay with mobile armatures and silver contacts. This module draws a current of 245 milliamperes at a voltage of +5 volts DC on the backplane with all outputs on the ON status. The IC200MDL930 weighs approximately 240 grams (0.53 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series VersaMax
Part Number IC200MDL930
Description Output module
Number of I/O points 8 individually-isolated Form A relay outputs
Outputs per module 1 of eight outputs each
Rated voltage 5/24/125 VDC -120/240 VAC
Output voltage range 0 to 125VDC, 5/24/125VDC nominal \ 0 to 265VAC (47 to 63Hz), 120/240VAC nominal
Isolation : User input to logic (optical) and frame ground/Group to group 250VAC continuous; 1500VAC for 1 minute / N/A
Output current 10mA per point minimum / 2.0A for 5 to 265VAC maximum (resistive) / 2.0A for 5 to 30 VDC maximum (resistive) / 0.2A for 31 to 125 VDC maximum (resistive)
Output voltage drop 0.3V maximum
On response time 10 ms maximum
Off response time 10 ms maximum
Internal power consumption 245 mA (all outputs on) from 5 volt bus on backplane
Operating temperature 0 to 60 degrees C (32 to 140 degrees F)
Weight 240 g (0.53 lb.)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC200MDL930?

Answer: Yes. We offer repairs for the IC200MDL930 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC200MDL930?

Answer: If you buy the IC200MDL930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC200MDL930 online?

Answer: Yes. Automation Stop sells the IC200MDL930 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC200MDL930?

Answer: The IC200MDL930 is made by Emerson - GE Fanuc.


Question: What Brand does the IC200MDL930 have?

Answer: The IC200MDL930 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Description does the Rockwell-Automation IC200MDL930 have?

Answer: The IC200MDL930 has a Output module Description.


Question: What Internal power consumption does the Rockwell-Automation IC200MDL930 have?

Answer: The Internal power consumption of the IC200MDL930 is 245 mA (all outputs on) from 5 volt bus on backplane.


Question: What is the Isolation : User input to logic (optical) and frame ground/Group to group of the Allen Bradley-Rockwell Automation IC200MDL930?

Answer: The Isolation : User input to logic (optical) and frame ground/Group to group of the Allen Bradley-Rockwell Automation IC200MDL930 is 250VAC continuous; 1500VAC for 1 minute / N/A.


Question: What is the Number of input/output points of the Allen Bradley Automation IC200MDL930?

Answer: The IC200MDL930 has a Number of input/output points of 8 individually-isolated Form A relay outputs.


Question: What Off response time does the IC200MDL930 have?

Answer: The Off response time of the Allen Bradley IC200MDL930 is 10 ms maximum.


Question: What is the On response time of the Allen Bradley IC200MDL930?

Answer: The On response time of the IC200MDL930 is 10 ms maximum.


Question: What is the Operating temperature of the IC200MDL930?

Answer: The Operating temperature of the Allen Bradley-Rockwell Automation IC200MDL930 is 0 to 60 degrees C (32 to 140 degrees F).


Question: What is the Output current of the Allen-Bradley IC200MDL930?

Answer: The IC200MDL930 has a Output current of 10mA per point minimum / 2.0A for 5 to 265VAC maximum (resistive) / 2.0A for 5 to 30 VDC maximum (resistive) / 0.2A for 31 to 125 VDC maximum (resistive).


Question: What Output voltage drop does the IC200MDL930 have?

Answer: The Output voltage drop of the Rockwell Automation IC200MDL930 is 0.3 volts maximum.


Question: What is the Output voltage range of the Rockwell Automation IC200MDL930?

Answer: The Output voltage range of the Rockwell Automation IC200MDL930 is 0 to 125VDC, 5/24/125VDC nominal \ 0 to 265VAC (47 to 63Hz), 120/240VAC nominal.


Question: What is the Outputs per module of the IC200MDL930?

Answer: The Allen Bradley Automation IC200MDL930 has a Outputs per module of 1 of eight outputs each.


Question: What part Number does the IC200MDL930 have?

Answer: The Allen Bradley/Rockwell Automation IC200MDL930 has a part Number of IC200MDL930.


Question: What is the Rated voltage of the IC200MDL930?

Answer: The IC200MDL930 has a Rated voltage of 5/24/125 VDC -120/240 voltage alternating current (VAC).


Question: What is the Weight of the IC200MDL930?

Answer: The IC200MDL930 has a Weight of 240 g (0.53 lb.).


Series information for IC200MDL930

For additional information about IC200MDL930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC200MDL930.

Revision Part # Also Known As Availability
IC200MDL930E IC200MDL930 Series E, Rev E Request a Quote
IC200MDL930J IC200MDL930 Series J, Rev J Request a Quote
IC200MDL930K IC200MDL930 Series K, Rev K Request a Quote

Common Misspellings:

  • IC200MDL93O
  • IC20OMDL930
  • IC20OMDL93O
  • IC2O0MDL930
  • IC2O0MDL93O
  • IC2OOMDL930
  • IC2OOMDL93O
  • 1C200MDL930
  • 1C200MDL93O
  • 1C20OMDL930
  • 1C20OMDL93O
  • 1C2O0MDL930
  • 1C2O0MDL93O
  • 1C2OOMDL930
  • 1C2OOMDL93O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP