GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC697PWR710

✓ In Stock

IC697PWR710 Image 1 thumbnail
IC697PWR710 Image 2 thumbnail
IC697PWR710 Image 3 thumbnail
IC697PWR710 Image 4 thumbnail
IC697PWR710 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC697PWR710
Series: Series 90-70
UPC: 310732649522

Description:

The GE Fanuc Emerson IC697PWR710 is a high-efficiency power supply that delivers a power of 55 Watts. The IC697PWR710 supports either an input voltage of 120/240 Volts AC or 125 Volts DC. The IC697PWR710 delivers an output voltage of 5 Volts DC and a current of 11 Amperes. This power supply weighs approximately 1.04 kilograms (2.29 pounds).



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC697PWR710 is a high capacity power supply that delivers a power of 55 Watts. The IC697PWR710 supports either an input voltage range from 100 Volts DC to 300 Volts DC or an input voltage range from 90 Volts AC to 264 Volts AC at a frequency range from 47 Hertz to 63 Hertz. The IC697PWR710 delivers an output voltage of 5 Volts DC and a current of 11 Amperes. The IC697PWR710 includes single fuse protection that has a current rating of 1 Ampere. The IC697PWR710 can be mounted on the rack. This power supply supports an overvoltage of 6.2 Volts DC using a jumper to protect devices and an overcurrent of 12 Amperes on the 5 Volts DC output using an electronic short circuit. The IC697PWR710 is employed for Series 90-70 PLCs.

The IC697PWR710 power supply supports a maximum input power of 90 Watts with DC input at full load and an inrush current of 3 Amperes within a short time of 250 milliseconds. The IC697PWR710 delivers a total electrical power of 55 Watts. The IC697PWR710 has a holdup time of 21 milliseconds and has a door to cover and protect the user from accidental shock hazard. The IC697PWR710 unit can be plugged employing 48-pin connector which is in the rack left side slot. This power supply weighs approximately 1.04 kilograms (2.29 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 120/240 VAC / 125 VDC, 55 Watts power supply for Series 90-70
Part Number IC697PWR710
Power Supply Type AC/DC input power supply
Load Capacity 55 Watts
Nominal Input 120/240 VAC or 125 VDC
Input Voltage Range 90 VAC to 264 VAC or 100 VDC to 300 VDC
Input Power 90 Watts with VDC Input
Output Voltage Range 4.9 to 5.25 VDC
Fuse Current Rating 1 Ampere
Number of Fuses 1
Overvoltage 6.2 VDC
Overcurrent 12 Amperes, maximum
Holdup Time 21 milliseconds, minimum
Weight 1.04 Kg (2.29 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC697PWR710?

Answer: Yes. We offer repairs for the IC697PWR710 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC697PWR710?

Answer: If you buy the IC697PWR710 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC697PWR710 online?

Answer: Yes. Automation Stop sells the IC697PWR710 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC697PWR710?

Answer: The IC697PWR710 is made by Emerson - GE Fanuc.


Question: What Brand does the Allen-Bradley IC697PWR710 have?

Answer: The IC697PWR710 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Fuse Current Rating does the IC697PWR710 have?

Answer: The Fuse Current Rating of the IC697PWR710 is 1 Ampere.


Question: What is the Holdup Time of the IC697PWR710?

Answer: The Holdup Time of the IC697PWR710 is 21 milliseconds, minimum.


Question: What Input Power does the IC697PWR710 have?

Answer: The Rockwell Automation IC697PWR710 has a Input Power of 90 Watts with VDC Input.


Question: What is the Input Voltage Range of the Rockwell-Automation IC697PWR710?

Answer: The Input Voltage Range of the Rockwell-Automation IC697PWR710 is 90 VAC (voltage alternating current) to 264 VAC (voltage alternating current) or 100 VDC to 300 VDC.


Question: What Load Capacity does the Allen-Bradley IC697PWR710 have?

Answer: The Load Capacity of the IC697PWR710 is 55 Watts.


Question: What Nominal Input does the Rockwell Automation IC697PWR710 have?

Answer: The Rockwell Automation IC697PWR710 has a Nominal Input of 120/240 VAC (voltage alternating current) or 125 VDC.


Question: What is the Number of Fuses of the Allen Bradley/Rockwell Automation IC697PWR710?

Answer: The Number of Fuses of the Allen Bradley/Rockwell Automation IC697PWR710 is 1.


Question: What Output Voltage Range does the Allen Bradley IC697PWR710 have?

Answer: The Allen Bradley IC697PWR710 has a Output Voltage Range of 4.9 to 5.25 VDC.


Question: What is the Overcurrent of the Allen Bradley/Rockwell Automation IC697PWR710?

Answer: The Overcurrent of the IC697PWR710 is 12 Amperes, maximum.


Question: What is the Overvoltage of the Allen Bradley-Rockwell Automation IC697PWR710?

Answer: The Overvoltage of the IC697PWR710 is 6.2 VDC .


Question: What component Number does the IC697PWR710 have?

Answer: The Allen Bradley/Rockwell Automation IC697PWR710 has a component Number of IC697PWR710.


Question: What power supply component Type is included with the IC697PWR710?

Answer: The Allen-Bradley IC697PWR710 has a alternating current (AC)/DC (direct current) input power supply power supply Type.


Question: What is the Weight of the IC697PWR710?

Answer: The Weight of the IC697PWR710 is 1.04 Kg (2.29 lb).


Series information for IC697PWR710

For additional information about IC697PWR710 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697PWR710.

Revision Part # Also Known As Availability
IC697PWR710B IC697PWR710 Series B, Rev B Request a Quote
IC697PWR710K IC697PWR710 Series K, Rev K Request a Quote
IC697PWR710M IC697PWR710 Series M, Rev M Request a Quote

Common Misspellings:

  • IC697PWR71O
  • IC697PWR7I0
  • IC697PWR7IO
  • ICG97PWR710
  • ICG97PWR71O
  • ICG97PWR7I0
  • ICG97PWR7IO
  • 1C697PWR710
  • 1C697PWR71O
  • 1C697PWR7I0
  • 1C697PWR7IO
  • 1CG97PWR710
  • 1CG97PWR71O
  • 1CG97PWR7I0
  • 1CG97PWR7IO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP