GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC697MDL740 |
| Series: | Series 90-70 |
| UPC: | 814226230642 |
Description:
Part number IC697MDL740 is a discrete output module that was designed and manufactured by GE Fanuc. This device is part of the Series 90-70 product line. This module has 16 output points divided into 4 groups of 4. This output module must be used with an electric fuse rated at 10 amperes. Among other interesting features, this module comes with a high inrush current rating. Thanks to its current inrush rating, it is perfect for use in a wide array of industrial settings. The module can be removed by adjusting the clips that hold it in place in the slot.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc IC697MDL740 is a discrete output module. This module can be paired with solenoids, LED indicators, industrial motor starters, and other applications. These loads can be linked to one of the sixteen (16) outlet points on the module, which are organized into four-point clusters. Each of these points receives a direct current output of twenty-four (24) to forty-eight (48) volts at a rate of two (2) amperes per point of long-term current. The IC697MDL740's input surge conduction capacity, however, is greater than two (2) amperes.
A ten (10)-ampere fuse is shared by all of the output point clusters. The module's face has a number of LED indicators that show the state of the circuit and fuse at various points. The IC697MDL740's configuration does not require any DIP or jump switches. The user can combine this module with software to help configure the system. The SNP port or Ethernet TCP/IP are used for this process lot.
Furthermore, the user has the option of configuring the IC697MDL740 to turn off or keep the output points in their current state. Each IC697MDL740 comes with a mechanical key that may be used to modify a slot to fit the module. The key is put into the backplate of the IC697MDL740 and slipped into the slot where the module was originally fitted. To avoid unintentional usage of the slot, this key remains in the groove even after the module has been removed. This accessory, however, can be removed if necessary, after the IC697MDL740 has been extracted.
FAQ
Question: Does Automation Stop offer repairs on the IC697MDL740?
Answer: Yes. We offer repairs for the IC697MDL740 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697MDL740?
Answer: If you buy the IC697MDL740 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697MDL740 online?
Answer: Yes. Automation Stop sells the IC697MDL740 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697MDL740?
Answer: The IC697MDL740 is made by Emerson - GE Fanuc.
Series information for IC697MDL740
For additional information about IC697MDL740 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697MDL740.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC697MDL740B | IC697MDL740 Series B, Rev B | Request a Quote |
| IC697MDL740C | IC697MDL740 Series C, Rev C | Request a Quote |
| IC697MDL740D | IC697MDL740 Series D, Rev D | Request a Quote |
| IC697MDL740E | IC697MDL740 Series E, Rev E | Request a Quote |
| IC697MDL740F | IC697MDL740 Series F, Rev F | Request a Quote |
Common Misspellings:
- IC697MDL74O
- ICG97MDL740
- ICG97MDL74O
- 1C697MDL740
- 1C697MDL74O
- 1CG97MDL740
- 1CG97MDL74O
