GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC697MDL653 |
| Series: | Series 90-70 |
| UPC: | 489238680459 |
Description:
The IC697MDL653 is a 32-Point Positive/Negative Logic Input module manufactured by GE Fanuc for the 90-70 Series. The discrete input module has thirty-two (32) input points that are arranged into four (4) isolated sets each comprised of eight (8) input points.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC697MDL653 is a 32-Point Positive/Negative Logic Input module manufactured by GE Fanuc Automation for its 90-70 Series of PLCs. The thirty-two (32) input points of this 24 Volt DC module are grouped in four (4) isolated sets, each comprised of eight (8) input points. This discrete Logic input module has a voltage of 24 Volts DC and has an input voltage range of -3 Volts to 30 Volts DC. The isolation voltage rating of the module is 1500 Volts for any input connected to the backplane and 500 Volts for between the four (4) input groups. This Positive/Negative Logic Input module has an input current of 10 milliamperes at the rated voltage and the input impedance is 2.6 kilo-ohms.
The IC697MDL653 has an on-state voltage of 13.5 to 30 Volts and an off-state voltage of zero (0) to 5 Volts. The on-state current of this module is 6 milliamperes to 15 milliamperes and the off-state current is zero (0) to 2 milliamperes. Moreover, the IC697MDL653 module has a configurable filter delay time of 1 millisecond to 10 milliseconds. The filter delay time configuration of the module is done on a point-by-point basis and the users need to note that all the input points feature the same filter time. It will require 0.3 Amperes of current from a 5 Volts bus. The IC697MDL653 module also has a mechanical keying capability that makes it impossible to be installed on the wrong base. The module also accepts wire gauges of AWG 22 to AWG 14. If required, the module can be removed easily from the slot in the rack.
Technical Specifications
| Number of Inputs | 32 Inputs (4 groups of 8 each) |
| Current Required | 0.3 Amperes |
| DC Power | Yes |
| Input Voltage Range | -3 to +30 Volts DC |
| Rated Voltage | 24 Volts DC |
| Isolation | 1500 Volts |
| On-State Voltage | 13.5 Volts to 30 Volts |
| On-State Current | 6 milliamperes to 15 milliamperes |
| Off-State Voltage | Zero (0) to 5 Volts |
| Off-State Current | Zero (0) to 2 milliamperes |
| Filter Delay Time | 1 milliseconds or 10 milliseconds configurable |
| Current Required from 5 Volts Bus | 0.30 Amperes |
| Input Current | 10 milliamperes |
| Input Impedance | 2.6 Kilo-ohms |
FAQ
Question: Does Automation Stop offer repairs on the IC697MDL653?
Answer: Yes. We offer repairs for the IC697MDL653 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697MDL653?
Answer: If you buy the IC697MDL653 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697MDL653 online?
Answer: Yes. Automation Stop sells the IC697MDL653 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697MDL653?
Answer: The IC697MDL653 is made by Emerson - GE Fanuc.
Question: What Current Required does the IC697MDL653 have?
Answer: The IC697MDL653 has a Current Required of 0.3 Amperes.
Question: What Current Required from 5 Volts Bus does the IC697MDL653 have?
Answer: The IC697MDL653 has a Current Required from 5 Volts Bus of 0.30 Amperes.
Question: Does the Allen-Bradley IC697MDL653 have a DC (direct current) Power?
Answer: Yes.
Question: What Filter Delay Time does the IC697MDL653 have?
Answer: The Allen Bradley-Rockwell Automation IC697MDL653 has a Filter Delay Time of 1 milliseconds or 10 milliseconds configurable.
Question: What is the Input Current of the IC697MDL653?
Answer: The Input Current of the Rockwell Automation IC697MDL653 is 10 milliamperes.
Question: What is the Input Impedance of the IC697MDL653?
Answer: The Allen Bradley/Rockwell Automation IC697MDL653 has a Input Impedance of 2.6 Kilo-ohms.
Question: What is the Input Voltage Range of the IC697MDL653?
Answer: The IC697MDL653 has a Input Voltage Range of -3 to +30 Volts DC.
Question: What is the Isolation of the IC697MDL653?
Answer: The Isolation of the IC697MDL653 is 1500 Volts.
Question: What Number of Inputs does the IC697MDL653 have?
Answer: The Number of Inputs of the IC697MDL653 is 32 Inputs (4 groups of 8 each).
Question: What is the Off-State Current of the IC697MDL653?
Answer: The Rockwell-Automation IC697MDL653 has a Off-State Current of Zero (0) to 2 milliamperes.
Question: What Off-State Voltage does the IC697MDL653 have?
Answer: The Off-State Voltage of the Allen Bradley/Rockwell Automation IC697MDL653 is Zero (0) to 5 Volts.
Question: What is the On-State Current of the IC697MDL653?
Answer: The On-State Current of the IC697MDL653 is 6 milliamperes to 15 milliamperes.
Question: What is the On-State Voltage of the Allen Bradley Automation IC697MDL653?
Answer: The On-State Voltage of the Allen Bradley Automation IC697MDL653 is 13.5 Volts to 30 Volts.
Question: What Rated Voltage does the IC697MDL653 have?
Answer: The IC697MDL653 has a Rated Voltage of 24 Volts direct current.
Series information for IC697MDL653
For additional information about IC697MDL653 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697MDL653.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC697MDL653A | IC697MDL653 Series A, Rev A | Request a Quote |
| IC697MDL653B | IC697MDL653 Series B, Rev B | Request a Quote |
| IC697MDL653C | IC697MDL653 Series C, Rev C | Request a Quote |
| IC697MDL653D | IC697MDL653 Series D, Rev D | Request a Quote |
| IC697MDL653E | IC697MDL653 Series E, Rev E | Request a Quote |
| IC697MDL653H | IC697MDL653 Series H, Rev H | Request a Quote |
Common Misspellings:
- IC697MDL6S3
- IC697MDLG53
- IC697MDLGS3
- ICG97MDL653
- ICG97MDL6S3
- ICG97MDLG53
- ICG97MDLGS3
- 1C697MDL653
- 1C697MDL6S3
- 1C697MDLG53
- 1C697MDLGS3
- 1CG97MDL653
- 1CG97MDL6S3
- 1CG97MDLG53
- 1CG97MDLGS3
