GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC697HSC700 |
| Series: | Series 90-70 |
| UPC: | 473783641256 |
Description:
The IC697HSC700 is a high speed counter module manufactured by GE Fanuc. It is used for the processing of signals.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC697HSC700 is a sole slot high-speed counter module for the processing of signals at a rate of 200 kHz. It has 5 selectively counter types with different configurations (a, b, c, d, and e). Each counter is configured to govern in either continuous or single-shot mode. In continuous counter mode, when the upper or lower counter exceeds, the counter coats around to the other limit and proceeds; in single-shot counter mode the counter accounts pay either the upper or lower limit and stop. The IC697HSC700 has 12 single-ended or differential inputs, 4 outputs, and a PLC ladder interrupt proficiency (optional). It rapidly processes the signal having a frequency rate up to 200 Khz and it senses the inputs from the field devices, filters the intake counter data, and controls its output without communicating or interfering with the PLC CPU. There are 5 status LEDs accessible in the module - the Module OK LED indicates the present status of the high-speed counter module and the 4 output LED implies the current status of the corresponding output whether it is in on/off state.
The main features of the IC697HSC700 module include inbuilt + 5 Volt DC output, external oscillator, software configuration, and internal module diagnosis capability. Software format is done by using the configuration function of the Windows programming software. This high-speed counter module is simple and user-friendly with the PLC interference that makes it extremely useful and finds applications for industrial purposes including process control, motion control, velocity measurement, etc. It can be installed in any area of an I/O slot in the CPU rack. There are 40 removal terminal strip connection points to field devices to the high-speed counter.
Technical Specifications
| Input Voltage Range | 5 Volts DC or 10-30 Volts DC |
| Output Voltage Range | 30 Volts DC |
| No. of Inputs | 12 |
| Positive Logic Outputs | 4 |
| Off-State Leakage Current | 10 micro-amperes for each output |
| I/O Type | Positive |
| Processing Speed | 200 KHz |
| Power Consumption | 500 milliamperes @ 5 Volts DC |
| No. of Configurations | 5 |
| Input Hysteresis | 250 mV |
FAQ
Question: Does Automation Stop offer repairs on the IC697HSC700?
Answer: Yes. We offer repairs for the IC697HSC700 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697HSC700?
Answer: If you buy the IC697HSC700 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697HSC700 online?
Answer: Yes. Automation Stop sells the IC697HSC700 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697HSC700?
Answer: The IC697HSC700 is made by Emerson - GE Fanuc.
Question: What input/output Type is included with the Allen Bradley IC697HSC700?
Answer: The Allen Bradley IC697HSC700 has a Positive input/output Type.
Question: What Input Hysteresis does the IC697HSC700 have?
Answer: The Allen Bradley-Rockwell Automation IC697HSC700 has a Input Hysteresis of 250 mV.
Question: What Input Voltage Range does the Allen-Bradley IC697HSC700 have?
Answer: The Input Voltage Range of the Allen-Bradley IC697HSC700 is 5 Volts DC (direct current) or 10-30 Volts DC (direct current).
Question: What No. of Configurations does the Allen Bradley IC697HSC700 have?
Answer: The Allen Bradley IC697HSC700 has a No. of Configurations of 5.
Question: What No. of Inputs does the Allen Bradley Automation IC697HSC700 have?
Answer: The No. of Inputs of the Allen Bradley Automation IC697HSC700 is 12.
Question: What Off-State Leakage Current does the Rockwell-Automation IC697HSC700 have?
Answer: The Off-State Leakage Current of the Rockwell-Automation IC697HSC700 is 10 micro-amperes for each output.
Question: What Output Voltage Range does the Allen-Bradley IC697HSC700 have?
Answer: The Output Voltage Range of the Allen-Bradley IC697HSC700 is 30 Volts direct current (DC).
Question: What is the Positive Logic Outputs of the IC697HSC700?
Answer: The IC697HSC700 has a Positive Logic Outputs of 4.
Question: What Power Consumption does the IC697HSC700 have?
Answer: The Rockwell-Automation IC697HSC700 has a Power Consumption of 500 milliamperes @ 5 Volts DC.
Question: What Processing Speed does the Allen Bradley/Rockwell Automation IC697HSC700 have?
Answer: The Processing Speed of the IC697HSC700 is 200 KHz.
Series information for IC697HSC700
For additional information about IC697HSC700 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697HSC700.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC697HSC700F | IC697HSC700 Series F, Rev F | Request a Quote |
| IC697HSC700G | IC697HSC700 Series G, Rev G | Request a Quote |
Common Misspellings:
- IC697HSC70O
- IC697HSC7O0
- IC697HSC7OO
- IC697H5C700
- IC697H5C70O
- IC697H5C7O0
- IC697H5C7OO
- ICG97HSC700
- ICG97HSC70O
- ICG97HSC7O0
- ICG97HSC7OO
- ICG97H5C700
- ICG97H5C70O
- ICG97H5C7O0
- ICG97H5C7OO
- 1C697HSC700
- 1C697HSC70O
- 1C697HSC7O0
- 1C697HSC7OO
- 1C697H5C700
- 1C697H5C70O
- 1C697H5C7O0
- 1C697H5C7OO
- 1CG97HSC700
- 1CG97HSC70O
- 1CG97HSC7O0
- 1CG97HSC7OO
- 1CG97H5C700
- 1CG97H5C70O
- 1CG97H5C7O0
- 1CG97H5C7OO
